REPAIRS TO DOORS WINDOWS AND VENTILATORS IN CERTAIN BLDGS UNDER AGE BR-I AT INS SHIVAJI LONAVLA

Amount

Taking down steel/aluminium windows/ventilator of any size with all fittings complete

Taking down steel/aluminium door/partiton of any type & size with all fittings complete

Taking down chowkats or frames N.exc 1.5 Sqm with shutter (without taking of shutter from the frame.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqcm with shutter (without taking of shutter from the frame.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each

Supply and fix aluminium powder coated fixed type ventilator without sash bar, centre to centre distance of horizontal members not exc 60 cm & vertical members not exc 45 cm with 4 mm thick plain sheet glass,rubber packing with & including following powder coated section as given in 'JINDAL' catalouge complete all as specified and as directed (i) Frame (SP) -20052 (ii) Frame (DP) - 20051 (iii) Glazing clip - 19352

S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (ii) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

S&F Powder coated aluminium window side hung type without sash bars section as per IS-737 and weighing not less than 0.5kg/Rm including necessary jointing clips, rubber packing anodised snap beading , screws and stainless steel hinges, all aluminium fittings such as handles and stays and locking arrangements and 4mm thick sheet glass, etc complete

M&L for powder coated aluminium two track, two shutters (of equal width), sliding type windows without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings (two No's for each sliding shutters) & 4.00mm thick plain glass for glazing with & including following powder coated sections as given in 'JINDAL' catalogue complete all as specified and as directed :- (i) Frame (Bottom)-20956 (ii) Frame (Top & Side)-20966 (iii) Shutter vertical (Handle lock)-20846.(iv) Shutter vertical (Int lock)-20845.(v) Shutter (Top)-20844.(vi) Shutter (Bottom)-20847. Note :- (i) The window opening shall be provided with two shutters of equal width. (ii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window. (iii) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (iv) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

M&L for powder coated aluminium three track and three shutter (of equal width) sliding type window without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings two No's for each shutter with 4.00mm thick sheet glass for glazing shutters & stainless steel wire cloth of 0.36mm nominal dia of wire & average width of aperture 1.40mm for wire gauge shutters including following powder coated sections as given in 'JINDAL' catalogue complete all as specified and as directed :- (i) Frame (Bottom)-20620. (ii) Frame (Top & Side)-20621. (iii) Shutter vertical (Handle lock)-20846. (iv) Shutter vertical (Int lock)-20845. (v) Shutter (Top)-20844. (vi) Shutter (Bottom)-20847. Note :- (i) The window opening shall be provided with three shutters of equal width. (ii) Two shutters shall be glazed shutters & one shutter shall be with stainless steel wire cloth all as specified hereinbefore. (iii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window and at time the same can be utilized as partly glazed and partly gauzed window. (iv) The thickness of powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (v) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

S&F 10mm thick aluminium anodised Deco Grill (DG 104) fitted with 15mm wide 1mm thick aluminum beading

S&F aluminium powder coated single leaf partly glazed and partly panneled door in two panels having 12 mm thick MDF board both side laminated as bottom panell & 5 mm thick toughened glass on top panells on pivots along with hidroulic door closer, door lock, handle and other necessary builders haedware, glass fixed with rubber beading and glazing clips , MS clamp and using following powder coated aluminium section as given in "JINDAL" catalouge complete all as specified & as directed (a) Rectanguller tube -14005 (b) Shutter vertical - 19550, (c) Shutter Top rail -19563, (d) Shutter middle rail - 19525, (e) Shutter Bottom rail - 19563, (f) Glazing clips - 19352, (g) Handle - 18566

S&F aluminium powder coated partions partly glazed and partly panneled with 12 mm thick MDF board in bottom panel and 5 mm thick tinned in top panels fixed with clips, aluminium beads, rubber gasket etc centre to centre distance of vertical member shall n. cxe 1.10 mtr using following powder coated aluminium section as given in "JINDAL" catalouge complete all as specified & as directed (a) SP -20048 (b) DP - 20047, (c) Glazing clips - 19352. Note :- The thickness of powder coating shall not be less than 0.50 micron and tint shall be as decided by GE.

M&L for forming jambs,etc to openings(to forgoing item) including cutting,toothing and prooperly bonding into old work,.also facing,jointing and pointing to match existing work complete in CM 1:6

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F factory made PVC double door frame of size 50 mm x 95 mm made out of 5 mm single side prelaminted PVC sheet reinforced with MS Square tube all as specified and as directed .

S&F for 30 mm Factory made Moulded door shutter - Wood free consisting of frame made out of M.S. tube of 19 gauge thickness and size of 25 mm X 25 mm for stiles, top and bottom rails M.S. frame shall have a coat of steel primer. The inner panel shall consist of 25 mm thick High density EPSconforming to IS 4671-1984 bondedwith 2 mm termite proof, water proof and fire resistant molded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side of the EPS. The edge of the panel is to be sealed with lipping of 10mm wide PVC sheet baton (made by sticking 2 nos , PVC sheets of 5 mmt thickness using PVC solvent cement ) and stile sides 25 mm (5mm x 5)thick and 30mm wide PVC sheet fitted along M.S tube for lock provision & for lock height 5 mm thick PVC sheet of 150 mm x 100 mm fixed with upper & lower face of inner side of EPS panel and manufacturer's specification & drawing etc, complete all as specified and directed.

S&F for 30 mm thick Factory made fully glazed solid PVC Door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for stile and 15 mm x 15 mm for top, lock and bottom rail MS frame shall have a coat of steel primer of approved make and manufature MS frame shall be covered with 5 mm thick heat moulded PVC C channel of size 75 mm x 30 mm x 50 mm out of which 10 mm shall be bent at 90 degree towards inner side on front face of the door forming stile, for Top and Bottom rail MS frame shall be covered with 5 mm thick, 100 mm wide PVC sheet out of which 10 mm shall be bent at 90 degree towards inner side on front face of the door. MS frame at Lock rail shall be coverved with 125 mm wide PVC sheet out of which 10 mm both the adjust shall be bent at 90 degree on front face of the door and 75 mm wide PVC sheet shall covered the MS frame at top lock and bottom rail on back side of the door 5mm thick 20 mm croos PVC sheet as gap insert for Top and Bottom rail. PVC sheet beading of 10 mm thickness (5 mm x2), 25 mm wide to be stuck internally in the front face of the stiles and rails of the doors and 10 mm thick ( 5mm x 2), 15 mm wide and PVC sheet beading to be stuck internally in the back side of the stiles and rails of door with solvent cement adhesive,stainless steel wire mess will be fitted exteranlly in the clear face availabe between the stile and rails and fixed between PVC sheet of stiles and rails bent at 90 degree on front face 15 mm x 10 mm, 'L' shape outer beading nailed on stiles and rails at the back side so that the 'L' shape PVC beading can be removed when required for replacement of broken wire mess etc and manufacturer's specification & drawing etc, complete all as specified and directed.

S&F for 35 mm Factory made Moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness,lipped with 15 mm (5mm x 3) thick x30 mm width on the other stiles & bottom rails & 10mm (5mm x 2) thick x 30 mm width on other stiles & bottom rails , The inner panel laminated with 2 mm thick termite proof, water proof and fire resistant molded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC Lipping and manufacturer's specification & drawing etc, complete all as specified and directed.

S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified

S & F 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, with commercial face veneers.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F Glazed and skeleton shutters of 2 nd class Hard wood 30 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats

S&F Second class clean sawn hardwood in scantling fixed in timber framed work for cupboard frame all as specified and as directed.

S&F 18mm thick prelaminated Medium density fibre board, exterior grade, fixed to timber frame-work with stainless steel screws fixed in repairs all as specified and as directed.

S &F, in repairs, aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with in wooden windows, doors etc,and fixing of teak wooden beeding complete all as specified and as directed by the Engineer in charge.

S&F 100mm butt hinges, stainless steel medium weight fixed with stainless steel screws.

S&F aluminium handles cast type anodised 150mm size.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 250mm length.

S&F 125mm size Hasp and Staple, safety type aluminium anodised, including bolt to hinge plate and fixed with screws

Cutting holes in brick wall or stone walls built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 or cement concrete (1:2:4), type B1 as requried for depth of embedded portion of hold fasts or lugs measured from the face of the Jamb into the wall exc half brick & N.exc one brick all as specified and as directed.

S&F Bands, straps, ; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165

M&L for preparation of new or previously untreated wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

Preparing new steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide

Hacking out/taking down old broken glass (any thickness, size, quality or description) from aluminium windows shutters

S&F 4mm thick sheet glass ordinary quality and glazing with necessary rubber packing etc fixed to aluminium windows shutters including fixing neoprene beading complete all as specified.

Taking down Existing Aluminium windows of any size and description and refixing in same opening after repair/replacement of unserviceable fittings such as rollers /locking arrangements , neoprene beading etc to make the existing windows functional and making good disturbed surfaces all as directed by Engr-In-Charge

Resecuring or easing & adjusting, without taking down shutters exc 1 sq. m and n exc 2 sq. m each and refixing in same opening

Taking down Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and replacing damaged spring and making it operatable ;refixed in position as indicated, complete: push pull or manual type of area n.exc 12 Sqm

Taking down Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and replacing damaged spring and making it operatable ;refixed in position as indicated, complete: push pull or manual type of area exc 12 Sqm

M&L for Machine cut green marble slab, 18-20mm thick, single piece in full length of window cill/jamb over and including cement mortar screed/backing coat, 15 mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brickwork with Modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, for- ming toothing for, and bonding new into old brickwork /stone masonry

M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces and finished even and smooth without using extra cement on walls

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces and finished even and smooth without using extra cement on walls

Preparing new surfaces, plastered or unplastered surfaces of walls and applying three coats of white washing

M&L for Preparing new plastered surface and applying 2 coats of Apex paint on walls over a coat of primer

M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper complete all as specified and as directed.

Preparing old steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide

S & F in repairs to Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

SAI SAMARTH ENTERPRISES

VIJAYA ENTERPRISES

RK AND SONS CREATION

M/s KAILASH CHANDRA