Construction of Compound wall at V.K.Road Urban Health Wellness Center in Ward No 26, North Zone.

Amount

Earth work excavation for foundation in hard stiff clay, stiff black cotton,hard red earth mixed with small size boulders SS.20B and sand,silt or other loose soil,wet sand, or silt not under water, light black cotton soil,sandy loam ordinary soil and tofull depth as may be directed expect in hardrock requiring blasting inclusive of shoring shuttering,and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed depositing the surplus excavated soil with in the compound in places shown by the departmental officers with intial lead and lifts and claening and levelling the site etc., complete.

Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted etc., complete complying with standard specification.

Fly Ash Brick in cement mortar 1:5 (one cement and five sand) using best quality bricks of size 9"x4 4x3” for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining the required elevation shall be done without extra cost.

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as Rectangular Columns, Top and Bottom Slabs of Boxing, Sill Slabs, Sun Shades etc., in all floors using mild steel sheets of 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm X 25mm X 3mm for boarding laid over country wood joists of size 10cm X 6.50cm spaced at about 90cm centre to centre and supported by Casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete as directed

Supplying and erecting shuttering including necessary supports for plane surfaces such as RCC column footing,plinth beam, staircase steps etc., in all floors using mild steel sheets of size 90cmx60cm and BG 10 stiffened with welded mild steel angles for boarding supported by casuarinas props at suitable intervals etc complete complying with standard specification and as directed

Cement concrete 1:1.5:3(One cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for AII RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures RCC works wherever necessary as directed by departmetal officer etc complete

Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification

Plastering with cement mortar 1:5 (one cement and five sand by volume) 12mm thick for all internal/external surfaces like super structure rainwater, ducts, elevation in all floors complying with standard specifications

Painting with first quality emulsion paint two coat including cleaning, scrapping, removal of dust and necessary plaster of paris putty works wherever required etc complete

Providing and laying well gravel including cost and conveyance of all materials from approved quarries as noted in lead chart to the road side including loading, unloading and stacking the well gravel at road side to departmental gauge for pre-measurement including labour charges for laying spreading leveling to camper etc complee as per specification

Supplying and fixing of M.S. gate including all labours and transports charges as per direction of departmental officers including cutting, bending, welding and erection charges (3.05M x 1.50M)

Painting tow coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc, with best approved best quality of synthetic enamel paint of approved color over the existing priming coat etc complete complying with standard specifications and as directed by the departmental officers

Supply of 1 HP submersible motor including all all accesssoriews etc complete complying with standard specifications and as directed by the departmental officers

K RAMASAMY