Repair renovation of Qtr No 29 block 03 at Gulshan Ground Jammu

Amount

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead including all carriages and cost of material involved.(1:4) Mix (1 cement : 4 course sand).

Providing and fixing panelled or panelled and glazed shutters for doors, windows, clerestory windows, including ISI marked M S pressed butt hinges bright finished of required size with necessary screws including paneling and glazing all complete as per direction of EIC with deodar wood.(35mm thick)

Providing and fixing 35mm thick wire gauze shutters of deodar wood, using galvanized M.S wire gauze of average width for aperture 1:4mm with wire of dia 0.63mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled M.S butt hinges with necessary screws.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. Including all carriages and cost of material involved.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (as directed by the EIC at site).

Painting with ready mixed synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats)

Engagement of labour skilled/ unskilled for various dismantling works like tacking of floors, brick work, damaged tiles, etc including stacking of serviceable material as directed by EIC and disposal of unserviceable material up to 50 mtr lead.

Labour

Carpenter

Providing and fixing Sanitary fittings/ fixtures of approved brand like Jaguar, Parko, Cera, Kerovit or equivalent. (as directed by EIC)

C P Bib cock long nose

C P Angle valve

PVC Connection

C P Towel rod

C P Towel ring

Waste pipe with coupling

C P Grating

Wash Basin with pedestal and fittings

Wash basin mixer

C P Nipple

W. C. (one piece) with all fixtures complete.

Exhaust fan

Health faucet

Glass shelf (600x120x5)

Soap Dish

Centre hole mixture

Sink complete

Sink mixture

CPVC Pipe ½”

Looking glass (453x357)

PVC Pipe 3”

PVC Pipe 4”

Floor trap

Curtain rod

Providing / fixing powder coated aluminum Jali 2”x2” with Glass and aluminium 16 gauge on outer side of balcony complete as per direction of EIC including fittings all carriages and cost of material involved complete.

Providing and fixing Ceramic glazed Floor tiles wherever required of size 1'0"x1'0" or above in floors or as directed by EIC of approved make like NITCO, KAJARIA or equivalent etc. over 12 mm thick bed of cement mortar 1:4 and jointing with grey cement slurry including pointing in white cement mixed with pigment of matching shade complete, including all leads, lifts, costs and carriages of all materials involved.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.

Waterproofing of all surfaces as directed by EIC by cleaning the surface with wire brush to make the surface free from all loose particles, dust, etc, then Repairing/making the corner fillets (i.e Gola ) with Dr, Fixit Pidicrete URP 301 or equivalent waterproofing compound in cement and sand mortar in the ratio of 5ltr.URP : 1 cement : 4 sand. Then applying one coat of Dr. Fixit Tourch shield Primer (@ 1 ltr per 3.5 to 4 Sqm) or Equivalent with brush over the surface prepared for waterproofing. After primer coat Dr. Fixit Tourch shield membrane 3160 (3 mm thick) or equivalent is layed over all horizontal and vertical surfaces prepared with tourching and sealing of overlapped joints (Min. overlap of joints = 100 mm).including all carriages and cost of material involved.

Ranjit chopra

JASBIR PAL SINGH