Construcion of Fire Station and Recidential Quarters at Wagholi

Amount

Description of Item ( With Brief specification and reference to book of specification )

Labour charges for removing grass, thorney shrubs, Jungli shrub,Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete. R.A. 1

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. (Lift upto 1.5 m.) (By Mechanical Means) R.A. 2

Excavation for foundation in hard murum including removing the excavated material up to a distance of 50 metre beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling ramming, watering including shoring and strutting excetra complete. (Lift upto 1.5 m.) (By Mechanical Means) R.A. 3

Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. (Lift upto 1.5m.) RA 3A

Excavation for foundation in soft rock and old cement and lime masonary foundations including removing the excavated materials up to a distance 50 meters, beyond the building area and stacking as directed including dewatering preparing the bed for the foundation and necessary back filling, with available earth murum, ramming, watering including shoring and strutting excetra complete. (Lift from 1.5 m to 3.0 m) ( By Mechanical Means) R.A.4

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, excetra including trimming and levelling the bed, removing the excavated materials upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum ramming, watering, complete. (Lift upto 1.5 m). Spec. No.: Bd.A.6 Page No. 260 R.A.5

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 7.5 liters of emulsion Concentrates of 0.5 percent of Clorophyriphas/ Hephoclore per square meter of vertical surface area covering 10 years guarantee.Spec. : As directed by Engineer-in-charge. Ra.No. 6

Providing and laying Cast in situ/Ready Mix cement concrete in M-15 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I.(Vertical Shaft Impact Crusher) quality Artificial Sand R.A.7

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions excetra including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) excetra complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I.(Vertical Shaft Impact Crusher) quality Artificial Sand R.A.8

Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetracomplete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra omplete. With natural sand/V.S.I.(Vertical Shaft Impact Crusher) quality Artificial Sand R.A.9

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap/granite /quartzite / gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including Centering,formwork,coverblocks,laying/pumping, compactionand roughening the surface if special finish is to be provided and curing excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I.(Vertical Shaft Impact Crusher) quality Artificial Sand. R.A.10

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing fly ash brick masonry with conventional / Indaian Standard type fly ash bricks in cement mortar 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding excetra complete. R.A.15

Filling in plinth and floors with approved excavated materials in 15 centimetre to 20 centimetre layers including watering and compaction complete.Labour only R.A.16

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimetre. to 20 centimetre including watering and compaction excetra complete. R.A.17

Labour charges for providing soling using 80 millimetre size trap metal in 15 centimetre layer including filling voids with sand / grit ramming, watering complete. R.A.18a

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting excetra complete.Spec. No. : As directed by Engineer in charge.

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for Reinforced cement concrete slabs and landings canopy, waist slab with steps as per detailed designs and drawings or as directed includingcentering,formwork,coverblocks,laying/pumping,compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. R.A.10

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete chajja as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping,compaction and roughening the surface if special finish is to be provided and curing excetra complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I.(Vertical Shaft Impact Crusher) quality Artificial Sand R.A.12

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap granite /quartzite/ gneiss metal for Reinforced Cement Concrete pardi 75 millimetre thick fins as per detailed designs and drawings or as directed including centering , formwork , cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing excetra complete.(Excluding einforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I.(Vertical Shaft Impact Crusher) quality Artificial Sand R.A.13

A) Ground Floor

C) Second Floor

D) Third Floor

Providing and fixing in position Thermo Mechanically Treated - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches excetra as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. R.A.14

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing fly ash brick masonry with conventional/ Indain Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding excetra Complete. R.A.19

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing fly ash brick masonry with conventional / Indain Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 millimatre diameter/ two hoop iron strips 25 millimatre x 1.60 millimatre at every third course, properly bent and bounded at ends scaffolding raking joints and watering excetra complete. R.A.20

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /Burnt Brick masonry and or tying by binding wire excetra complete.R.A.24

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimatre thick layers of same mortar added with jute fiber at 1 Kilogramme per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 millimatre x 300 millimatre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/including ponding test excetra complete. R.A.41

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/including ponding test excetra complete.. R.A.40

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 millimatre thick in cement mortar 1:4 using waterproofing compound at 1 Kilogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 millimatre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding excetra complete. R.A.22

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing internal cement plaster 20 millimatre thick in a single coats in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing complete. R.A.21

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing internal cement plaster 12 millimatre thick in a single coats in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing complete. R.A.22

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing internal cement plaster 6 millimatre thick in a single coats in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing complete. R.A.21A

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and applying washable oil-bound distemper of approved colour and shade to old & new surfaces in Two Coats including scaffolding, preparing the surfaces (including the primer coat.) complete. R.A.76

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including cleaing,preparing surface applyng primer coat scaffolding if necessary watering for two days complete. R.A.77

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if neccessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, excetra complete. R.A.78

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing excetra On cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, excetra complete. RA 34

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and laying vitrified rustic matt stone finish tiles of RAK/Kajaria/ Nitco/ Asian or equivalent make having size 590 millimetre to 605 millimetre x 590millimetre to 605 millimetre of 8 to 10 millimetre thickness and confirming to Indian Standard 56222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning excetra complete. Flooring RA.26

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. R.A.27

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing patti/ band 100 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in Cement Mortar 1:3 in line and level including neat finishing scaffolding curing excetra complete. RA. 88

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Labour charges for providing groove in external plaster having width of 2.5 centimetre. and spaced at a distance of 45centimetre. excetra complete. RA. 89

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 millimetre thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning excetracomplete. R A 38A

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.. R.A.28

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for Skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting R.A.28A

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and laying in position flooring of telephone black /Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in cement mortar 1:3 curing and cleaning excetra complete.. R.A.45

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing mild steel grill work for windows, ventilators excetra 20 Kilogramme/squaremetre as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. R.A.76A

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to Indian Standard 65241983 having 6 millimatre diametre bars 3 Numbers. And strips @250 millimatre centre to centre and fixing in wall with 6 Numbers. of hold fast of 12 millimatre diametre bars 500 millimatre long including primer and oil painting etc, complete) frame size 60 millimatrex 125 millimatre. R.A.42

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing solid core flush door shutter in single leaf 32 millimatre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimatre thick on both faces or as directed, all necessary beads,mouldings and lipping,wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. RA 46

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing double shutter mild steel grill door 24 kilogramme per squaremetre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting excetra RA. 47

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 millimetre thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 millimetre at weight 0.637 kilogramme per running metre with window frame bottom track section 92 x 31.75 x 1.30 millimetre at weight 1.070 kilogramme per running metre. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kilogramme per running metre The shutter should be of bearing bottom 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre Inter locking section 40 x 18 x 1.10 millimetre at weight 0.469 kilogramme per running metre and handle and top section 40 x 18 x 1.25 millimetre at weight o.417 kilogramme per running metre As per detailed drawings and as directed by gineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete. With powder coating without box

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 millimetre thick float glass excetra complete. b) With powder coating R.A.52

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing during laying in Reinforced Cement Conctrete Slab rectangular 2 millimatre thick mild steel sheet fan hook box of size 180x100 millimatre with required depth with holes or notches as required, bottom and top sides of 1.6 millimatre mild steel sheet fixed with 3.5 millimatre diametre round headed screws together with 12 millimatre diametre mild steel bar bent to shape with hooked ends for fan hook and painting to exposed surface Spec. No.: As directed by Engineer-in-charge. Ra.No. 53

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing 40 millimatre diametre and 1.5 millimatre thick stainless steel grill hand railing in Stainless steel 304 grade including fabricating, fixtures, errecting, necessary welding griding finishing buffing to stainless pipe excetracomplete. R.A. No.82

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing stainless steel sink of size 600 x 510 x 200 millimatre incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing excetra complete. R.A.57

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and preparing kitchen otta made up from 30 millimetre thick and 75 centimetre. wide Granite stone top 75 centimetre high vertical support for kadappa at 1 metre. centre to centre of 25 millimetre thick both side polished including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning excetra complete.Spec. No.: Bd.M.42-35 C RA 80

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and preparing kitchen otta made up from 30 millimetre thick and 75 centimetre wide kadappa stone top 75 centimetre high vertical support for kadappa at 1 metre. centre to centre of 25 millimetre thick both side polished kadappa middle shelf and bottom of 20 millimetre thick one side polished kadappa with facia patti of 20 x 50 millimetre kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning excetra complete.Spec. No.: Bd.M.42-35 C RA 80a

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 millimetre diametre including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 millimetre thick, 10 liter Polyvenyl chloride flushing cistern with all necessary pipe connection excetra complete. R.A.55

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 centimetre size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap,chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing excetracomplete.. R.A.56

A) Ground Floor

B) First Floor

C) Second Floor

Providing and fixing European type wall hung white water closet of perriware / Hindware with push valve connected type with cover plate 32 millimetre in size of JAGUAR MAKE Series FLV 1095 including soil pipe ,vent pipe upto out side face of wall , 100 millimetre diametre Galvanised Iron Plug bent inlet pipe all fittings,cutting,cutting & making good walls floors excetracomplete. RA. 54

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing 10 centimetre Polyvenyl chloride nahani trap with grating excetra complete. R.A.58

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing on walls/ ceiling/ floor---------dia. CPVC pipe with necessary fittings, remaking good the demolished portion excetra complete. Including removing existing pipe line if necessary and conveying and stacking the sam as directed excetra complete. R.A.71

A) 15 millimetre diameter

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

B) 25 millimetre diameter

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

C) 32 millimetre diameter

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

D) 40 millimetre diameter

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing & laying in trenches medium grade having embossed as ISI Mark galvanised iron pipes of 50 millimetre diameter at 5.17 kilogramme/metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti corrosive oil paint, 2 coats etc, complete. R.A.72

50 mm dia.

80 mm dia.

Providing and fixing cromium plated BIB cock with wall flange jaquar make continental (CAT.NO. CON-047) including necessary sockets/ union nut excetra complete . Ra.No. 75

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing cromium plated sink cock with raised J shaped swinging casted spout jaquar make continental (CAT.NO. CON -359) including necessary sockets/ union nut excetra complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing screw down 40 millimetre diameter wheeled stop tap of brass including necessary sockets / union nut complete. R.A.74

A) Ground Floor

D) Third Floor

Providing & fixing 40 millimetre diameter Ball cock medium type with Polynenyl chloride float including sockets & necessary fittings and tested as per municipal requirements excetra complete.Spec.: As directed by Engineer-in-charge.

A) Ground Floor

C) Second Floor

D) Third Floor

Providing and fixing 450 millimetre x 550 millimetre size superior type Belgium mirror with 16millimetre diametre nickel plated towel rod excetra complete. RA 61

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing chromium plated towel rod 16 millimetre diametre and 75 centimetre in length including all accessories complete. R.A.62

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing 100 millimetre diametre chromium plated brass showers rose to 15 millimetre diametre supply pipe including necessary bend and socket complete. R.A.63

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing 75 millimetre diameter pipe stablilliser pipe/ Polyvenyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps excetra complete. R.A.59a

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing 100 millimetre diameter pipe stablilliser pipe/ Polyvenyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps excetra complete. R.A.59

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and Fixing 110 millimetre diameter Polyvenyl chloride Rain Water pipe with necessary fittings such as bends, tees, single junctions, slotted vent, clamps etc complete. R.A.60

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. R.A.64

Providing & constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete excetra complete with Reinforced Cement Concrete Cover. R.A.65

Providing & constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete excetra complete with Reinforced Cement Concrete Cover. R.A.66

Providing and laying 100 millimetre diameter salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. R.A.68

Providing and laying 150 millimetre diameter salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. R.A.68

Providing and fixing 90 centimetre X 60 centimetre. Granite year plate engraving 10 cm. Height letterfigures including painting the letter/figureswith approved colour and shade complete.Ra.No.59b

Providing and fixing heavy duty inter locking concrete coloured paving blocks of 40 millimetre thickness of having a strength of 300 kilogramme per square metre of approved auqlity and shape on a bed of crushed sand of 25 to 30 millimetre thick including skirting joints and cleaning excetra complete R.A.39

A) Ground Floor

Providing and laying concrete pipes of Indian Standard Non pressure class of 150 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. R.A.67

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and one coat of anticorrosive paint and over it 2 coats of oil painting complete.Spec. No.: Bd C.8 Page No. 278

B First Floor

Providing and fixing corrugated galvanised Iron sheets of 0.63 millimetre thick ( 24 B.W.G.) for roofing without wind tiles including fastening with galvanised/iron screw/ bolts and lead /bitumen washers as per drawing complete (Weight of 5.5 kg/squaremetre) Spec. No. Bd.R.5 Page No. 452

A) Ground Floor

Conveying materials obtained from excavation including all lifts, laying in layers, for a lead of over 10 km from the site of excavation to the site of deposition as directed.

Providing & Fixing Cast Iron Man Hole Cover (50 Kilogramme ) for Under Ground Water Tank and septic tank.

Providing weep holes in brick masonry /plain /reinforced concrete abutment, wing wall / return wall with 100 mm diameter AC pipe extending through the full width of the structure with slope of 1V: 20H towards drawing face as per drawings and technical specifications etc. complete.

Providing and fixing welded mesh of 11 gauge wires having mesh size 50 millimetre x 25 millimetre including Mild steel Angle frame of size 35 millimetrex 35 millimetre x5 millimetre in position with oil painting 3 coats etc.complete

Royalty Charges for sand

'Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Mechanical Means.

Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed.

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.

Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade,camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.

Providing earth work in embankment with approved materials obtained from departmental land or other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm.thickness breaking clods, dressing to the required lines, curves,grades and section, watering and compaction with Power roller to achieve not less than 97 % of standard proctor density etc.complete

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting ?with Intelligent Compactor with compaction analyzer and V-Sat attachment.to the required density. Grading I (Using Screening Type B (11.2 mm) Aggregate

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading II (Using Screening Type B (11.2 mm) Aggregate)

Providing & laying in situ M-15 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary bailing out water, compacting and curing. (including formwork, centering.) With crushed sand.Specifications: BR.5 Page No. 105

Providing and laying in situ cement concrete M30 with tremix treatment for 200 millimetre thickness for flooring with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen etc. complete. Spec. No.: As directed by Engineer in charge

Providing and fixing mild steel grill gate with angle iron frame 65 millimatre x 65 millimatre x 10 millimatre with iron bars at 150 millimatre.centre to centre and diagonal flats as per the detailed drawing including hinges, pivot blocks locking arrangement, welding riveting and oil painting of three coats of approved shade. Weight of gate 35 Kilogramme per square metret. Spec. No.: Bd.W.6 Page No. 585

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks,laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/(Vertical Shaft Impact Crusher)quality Artificial Sand

Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials,preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface

Providing and applying tack coat with bitumen emulsion (RS1) using emulsion pressure distributer at the rate of 0.20 kg per Sq.M. on the prepared bituminous cleaned with mechanical broom

BITUMINOUS MACADAM : Proving and laying bituminous macadam using crushed aggregates of Grading 2, premixed with bituminous binder, transported to site with VTS ,laid over a Previously prepared surface, finished to the required grade,level, alignment, and rolling to achieve the desired compaction for 50/75 mm compacted thickness with 3.4 % VG-30 Bitumen.Using 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and VSat attachment.

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS,laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG-30 Bitumen, including providing and laying seal coat sealing voids in a bituminious surface laid to the specified level and cross fall using Type A seal coat but Excluding prime / tack coat. For Bitumen VG-30 bulk--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller

Providing and laying 125 micron Low Density Polyethylene(LDPE) sheet confirming to IS 3395 : 1997 below concretepavement including all materials and labour complete.

V.Q.C.C. Testing Charges

Concrete Compression Strength

Cement Concrete Mix Design

Fineness Modulus, Silt & Clay Comtent

Chloride & sulphate Content

Silt Factor

Flakiness Index

Cement Fineness , Consistency, Setting Time (Initial/Final) ,Compression Strengdh , Specific Gravity

Steel Yeild Stress ,Ultimate tensile stress, %Elongation, Weight per Meter

Steel Yeild Stress ,Ultimate tensile stress, %Elongation, Weight per Meter

Crushed Metal Gradation

Crushed Metal Water Absorption, Specific Crushed Metal Gravity,Impact Value, Crushing Value

Crushed Metal Stripping Value

Crushed Metal Los angles abrasion value

Crushed Metal Flakiness Index

Crushed Metal Soundness

Bricks Water Absorption, Compressive Strength, Efflorescence

Paving Block Flexural Strength, Water absorption

Flooring Tiles Flexural Strength, Water absorption

Water absorption, Modulus of Rupture

Paint

Glass bead contents & Grading analysis

Reflectance

Flowability (Percentage residue )

Softening Point

Drying time

Particle Board

Determination of Moisture Content ,Determination of Density

Flush Door

Knife Test, Adhesion Test,End Immersion Test.

Preparing Lawn (30 cm depth) Excavating the ground to a required depth of 30 cms removing & conveying unwanted stuff to a required distance as directed . Filling Fresh garden soil/silt & manure excuatated area in 3 :1 proportion to a height of 30 cms mixing garden soil and manure thoroughly well leveling watering on previous night . planting required variety of lawn grass as directed and maintaing till well established by watering clipping riling etc. complete.

Preparing Lawn (20 cm depth) Excavating the ground to a required depth of 20 cms removing & conveying unwanted stuff to a required distance as directed . Filling Fresh garden soil/silt & manure excuatated area in 3 :1 proportion to a height of 20 cms mixing garden soil and manure thoroughly well leveling watering on previous night . planting required variety of lawn grass as directed and maintaing till well established by watering clipping riling etc. complete.

Preparing Edging or border. Excavating the ground to a required depth of 20 cms removing & conveying unwanted stuff to a required distanc+B4e as directed . Filling Fresh garden soil/silt & manure excuatated area in 3 :1 proportion to a height of 20 cms mixing garden soil and manure thoroughly well leveling watering as same . planting rooted edging / border plant at distance of 20 cms apart by watering weeding stiring of soil replacing casualties pruning if necessary etc. complete.

Planting large flowering/Shady Trees .Minimun height to 1 mt. Digging pit with size 0.9 m x 0.9 m x 0.9 m romoving and coneveying unwanted stuff to a required distance as directed . Filling the pit with approved excuatated material upto a height of 0.30 m and remaining height of 0.60 m with fresh garden soil in 3 :1 proportion . Mixing soil & manure thoroughly well leveling watering on previous night . planting one to two year old minimun 1.0 mt height ,healthy tree saping as per specifications. maintaing till well established by watering weeding stiring , soil staking , replacing of casualties etc. complete.

Planting large flowering/Shady Trees .Minimun height to 1 mt. Digging pit with size 0.9 m x 0.9 m x 0.9 m romoving and coneveying unwanted stuff to a required distance as directed . Filling the pit with approved excuatated material upto a height of 0.30 m and remaining height of 0.60 m with fresh garden soil in 3 :1 proportion . Mixing soil & manure thoroughly well leveling watering on previous night . planting one to two year old minimun 2.0 mt height ,healthy tree saping as per specifications. maintaing till well established by watering weeding stiring , soil staking , replacing of casualties etc. complete.

Planting small and midium size ornamental / Flowering plant :- large flowering/Shady Trees Minimun height to 1 mt. Digging pit with size 0.6 m x 0.6 m x 0.6 m romoving and coneveying unwanted stuff to a required distance as directed . Filling the pit with Fresh garden soil and farm Y and manure upto a height of 0.60 m with fresh garden soil in 3 :1 proportion . Mixing soil & manure thoroughly well leveling watering on previous night . planting one to two year old minimun 2.0 mt height ,healthy tree saping as per specifications. maintaing till well established by watering weeding stiring , soil staking , replacing of casualties etc. complete.

Bore well drilling of 150 mm daimetre

Providing and fitting PVC casing pipe of 180 mm diametre along with lowering, handling and grouting

Providing and fitting cap for 180 mm diametre PVC casing pipe .

Carrying Bore well yeild testing

Carrying geological survey including submitting report to competent aythority

Water Supply

Providing and supplying ISI marked D.I. S&S pipes ( push on joints pressure pipes of D.I. of following class and diam. confirming to the IS specifications inclusive of the cost of jointing materials ( rubber gasket of EPDM quality) including all statutory duties and taxes levied by Govt. of Maharashtra in all respect, education cess, VAT, third party inspection charges of TPI agency approved by MJP, including transit insurance, railway freight,unloading from railway wagon, loading into truck, transport to departmental stores/site, unloading, stacking, etc. complete.

100 mm diam. D.I ( K-9 ) pipes

Providing and supplying ISI mark C.I.double flanged sluice valves & scour valves of following diam.including all taxes ( Central & local ), railway freight , inspection charges , unloading from railway wagon ,loading into truck , transportation upto site , unloading , stacking etc. complete

100 mm diam. C.I. D/ fl. sluice valve ( Pn - 1 )

80 mm diam. C.I. D/ fl. scour valve ( Pn - 1 )

Item No. 3 : - Providing and supplying Air Valves as per IS 10845 and MJP’s standard specification double orifice type combined with screw down isolation valve , small orifice elastic ball resting on a gun metal orifice nipple , large orifice vulcanite ball seating on moulded seat ring , inlet face & drilled including all taxes(Central & Local ), insurance , third party inspection charges , loading ,unloading transportation upto departmental stores / site etc. complete.

50 mm diam. C.I. Single Ball ( Pn-1 ) Air valve

Item No. 4 : - Providing and supplying ISI mark C.I./ D.I.specials suitable for above pipes & valves including all taxes ( Central & local ), railway freight ,inspection charges , unloading from railway wagon loading into truck , transportation upto site ,unloading , stacking etc. complete

LABOUR SECTION

Item No. 1 : - Excavation for foundation / pipe trenches in earth soils of all types , sand , gravel & soft murum , including removing the excavated material upto a distance of 50 metres and lift as below , stacking and spreading as directed , normal dewatering , preparing the bed for foundation and excluding back filling , etc. complete [ Lift 0 M to 1.5 M ]

Item No. 2 : - Excavation for foundation / pipe trenches in hard rock by controlled blasting,including trimming and leveling the bed by chiseling where neccessary and removing the excavated material and stacking it in measurable hips within a distance of 50 metres from the area and lift as below , normal dewatering and excluding back filling , etc. complete [ Lift 0 M to 1.5 M ]

Item No. 3 : - Filling in plinth and floors murum bedding in trenches with apporved murum from excavated meterials from foundation 15cm to 20cm layers including watering compaction complete.

Item No. 4 : - Lowering, laying and jointing with SBR rubber gaskets D.I. pipes and specials of following class and diameter in proper position , grade and alignment as directed by Engineer in charge including conveyance of materials from stores to site of workes including cost of jointing material and rubber rings, labour, giving satisfactoryhydraulic testing as per IS code, etc. complete

100 mm diam. D.I ( K-9 ) pipes

Item No. 5 : - Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. ( Rate for all class of valves.)

100 mm dia.C.I.D/ fl.sluice valve(Pn - 1 )

80 mm diam. C.I.D/fl.scour valve( Pn -1 )

Item No. 6 : - Providing and fixing in poisition air valve shaft including providing and fixing GI Medium class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee,providing PCC block of M-150 concrete150 mm thick around the air valve tee including incasing of vertical shaft in PCC M-150as shown in type design together with providing and making flanged joints where ever required and fixing of air valve over the shaft excluding cost of air valves and branch flanged air valve tee etc. complete as per type design and as directed by Engineer-in-charge for followng diameter of pipe lines. foundation on murum or harder strata. (type design attached )

Item No. 7 : - Providing and laying in situ 1 : 2 : 4 ( M - 150 ) grade of C.C.of trap / granite / quartzite / gneiss metal for foundation & bedding includngdewatering , formwork , compacting and curing , finishing, etc. complete

Item No. 8 : - Providing and constructing B.B. masonary valve chamber with 15 cm thick 1 : 3 : 6 proportion PCC bedding , excluding excavation , B.B. masonary in CM ( 1 : 5 ) proportion ,12 mm thick cement plaster in CM ( 1 : 4 ) proportion on both sides with providing and fixing precast RCC frame & cover etc. complete as directed by Engineer - in - charge. Note wall thickness of 0.23 m for depth of 1.2 M & 0.35 m for balance depth exceeding 1.2 M Chamber of clear inside size 90 cm x 45 cm & depth upto 1.2 m with precast RCC slab & cover

Item No. 9 : - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation , surcharging etc. complete.

Submersible Monoblock PumpSet Providing,erecting & giving test & trial of Submersible Pump Q= 3.65 LPS, H= 42 m ( 5.0HP ) from all causes as per detailed specifications.

Sluice Valve :- Providing, erecting, testing & commissioning of Sluice Valve of 80mm dia glandless type & PN 1.0 rating with non rising spindle generally conforming to IS- 14846 as per detailed specifications.

Reflux Valve :- Providing, erecting, testing & commissioning of D.F. Reflux valve of 80 mm dia PN 1.0 rating, generally conforming to IS- 5312, Part I without bypass arrangement as per detailed specifications

Kinetic Air valve :- Providing erecting commissioning with test and trial of 40 mm dia Kinetic Double Orific type Air Valves of PN 1.0 rating as per detailed specifications.

MSDF Pipes & Specials :- Providing, lowering, laying, jointing and testing M.S.D.F Piping & Specials as per detailed specifications

Flanged Joints :- Providing making flanged joints to the MSDF pipes & specials as per detailed specifications

80 mm dia

Pressure Gauge :- Providing,erecting Pressure Gauge glyserene gelly filled 150 mm dia as per specifications

LT Panel :- Providing , erecting & Commissioning L.T. Control Panel for 5 HP pumpset comprising of all required electrical equipments as per detailed specifications.

Cables :- Providing erecting commissioning of Aluminium conductor XLPE armoured cable

4 X 2.5 mm2, AL Cable for Incoming

3 C X 2.5 mm2, Cu Cable

Full Bore Electromagnatic Flowmeter - Providing,installing testing and commissioning of Full Bore Electromagnatic Flowmeter 100 mm

RCC Chamber for Flowmeter - Providing RCC Chamber for Flowmeter as per detailed specification.

Provision for providing & stretching Transmission Line & making Electrical Connection to Switch House / Pump House including all material labour & deposites etc. complete

Centrifugal Monoblock pumpset.

Providing and erecting and giving test of centrifugal monoblock pumpset conforming to IS9079 operating at 2900 RPM with C.I. impeller , priming funnel,cock,suitable flanges at suction and delivery side.Pump shall have common shaft for Pump and motor.Motor shall be suitable for working on 415 volts +/- 10 % , 3 phase, 50 Hz AC supply. Motor shall be TEFC type. Pumpset shall be suitable for working at discharging 2.5 LPS against total head of 22 meters from all causes.Pump shall be erected on provided C.C. foundation block with suitable foundation bolts grouted in C.C.foundation block.

Sluice Valve :- Providing, erecting, testing & commissioning of Sluice Valve of 50mm dia glandless type & PN 1.0 rating with non rising spindle generally conforming to IS- 14846 as per detailed specifications.

Reflux Valve :- Providing, erecting, testing & commissioning of D.F. Reflux valve of 50 mm dia PN 1.0 rating, generally conforming to IS- 5312, Part I without bypass arrangement as per detailed specifications

Kinetic Air valve :- Providing erecting commissioning with test and trial of 15 mm dia Single Ball Air Valves of PN 1.0 rating as per detailed specifications.

G.I. Pipe : - Provideing erecting ISI mark G.I. Pipe medium duty 'B' Class pipe for suction of c/f monoblock pump including all local and central taxes, octroi,inspection charges and transportation to store for 50 mm dia

Foot Valve : - Supplying and installing cast iron foot valve of size 50 mm dia with strainer having single lather flap and gun metel seating . Valve shall be fixed on suction side of pump with jointing material and hardware .

LT Panel :- Providing , erecting & Commissioning L.T. Control Panel for 5 HP pumpset comprising of all required electrical equipments as per detailed specifications.

MSDF Pipes & Specials :- Providing, lowering, laying, jointing and testing M.S.D.F Piping & Specials as per detailed specifications

Flanged Joints :- Providing making flanged joints to the MSDF pipes & specials as per detailed specifications 50 mm dia

50 mm dia

R.C.C. Foundation :- Providing & casting in C.C. ( M - 150 ) for foundation as per detailed specification. Pressure Gauge glyserene gelly filled 150 mm dia as per specifications

Pressure Gauge :- Providing,erecting Pressure Gauge glyserene gelly filled 100 mm dia as per specifications

Cables :- Providing erecting commissioning of Aluminium conductor XLPE armoured cable

4 X 6 mm2, XLPE Cable for Incoming

3 C X 2.5 mm2, Cu Cable

Earthing Work : - Supplying and erecting Galvanised cast iron earth plate size 60 x 60 x 0.6 cm complete eith all material,Testing and recording the result as per specification

G. I. Earth Strip : - Providing and fixing Galvanised iron earth strip connected to nearest earthing and . . . As per IE rules and as per detailed specifications.

Tools : - Providing Tools of standard make and as per detailed specifications. ( as per R.A. attached )

Electrification : - Providing external and internal electrification.

Electrification

Point wiring in PVC trunking (casing capping) with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch,earthing and required accessories as per specification No: WG-PW/SW (1-9-16)

Point wiring in PVC trunking (casing-capping) with 1.0 sqm. FR grade copper wire with flush type switch and required accessories as per specification No. WG-PW/SW (1-9-16) ( FAN POINT )

Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.m (2+1E) FR grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW(1-9-18)

Wiring for plug on board with Switch socket with copper wiring and earthing as per specification No:WG-PW/SW (1-9-13)

Supplying and erecting modular type switch one way 16 / 20 A, ISI mark, approved make duly erected on provided plate and box with wiring connections complete with neon indicator. (1-8-7)

Supplying and erecting modular type 3 pin 6 /16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box withwiringconnections complete. (1-8-11)

Supplying and erecting modular type 6 / 16A fuse unit ISI mark approved make duly erected on provided plate and box with wiring connections complete. (1-8-13)

Supplying and erecting PVC Surface modularswitch box with double mounting plate for 4module duly erected in an approved manner. ( 1-8-30).

Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box (1-8-25)

Supplying & erecting T8 LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete( including lamp) (2-5-23.)

Supplying adopter for lamp holder 230/240 V .A.C. SUPPLY . (1-7-8.)

Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall.As per specification no.FG-IDF/BHF.(2-3-10)

Supplying and erecting Ding Dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size (2-2-13)

Supplying and erecting regular/ standard model Ceiling fan of 1200mm. sweep complete erected in position as per specifcation no. FGEach (2-13-3)

Supplying & fixing Anchor type fastener Fan hook, with 2 Nos of 10mm dia x 75 mm longwith necessary materials for Ceiling Fan.(2-12-2)

Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. Note: Add Rs 60/- provision of additional two modules for box and double plate.(1-8-23)

Supplying & erecting 5W-8W, 230V integral type LED Lamp suitable for B-22/E-27 base. (2-1-29)

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SWSWR/ MCB (5-3-2)

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/ MCB (5-3-3)

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SWSWR/ MCB (5-3-6)

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB’s on iron/ G.I. frame/wooden board as per specification No. SW-SWR/MCBDB (5-4-19)

Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP (9-1-1)

Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-4).

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (1-3-5).

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-3). For earthing

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid inprovided conduit / trunking/ inside pole / Busbars or any other places. as per specification No:WG-MA/BW (1-3-7). For power point

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid inprovided conduit / trunking/ inside pole / Busbars or any other places. as per specification No:WG-MA/BW (1-3-7). For flat mains

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2 (1-2-11)

Supplying and erecting LED street light fitting suitable above 26W to 36W lamp, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete as per specification No FG-ODF/FLS2 (2-9-3)

Supplying and erecting street light Wall bracket made from 25 mm.dia ‘B’class G.I. pipe 1.2 m in total length complete as per specificationno. FG-BKT/WB (2-6-3)

Supplying and erecting fresh air cum Exhaust fan of light duty250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wiremesh,duly erected in an approved manner and marking Sr. No. Anddate of erection (2-13-14)

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps & with dual function cartritge with output of purified water 2 Ltr/min with activated carbon filter and softener operating on 230 V single phase A.C. supply(2-5-2)

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50 cycles nominal cooling capacity of 40 liters per hour and storage capacity 80 liters with partially stainless steel body As per specification No. AP-WCR/WC(3-3-3)

Supplying and erecting ISI mark G.I. pipe pole ‘B’ grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification No. OH-PL/GIP (8-1-14)

Supplying, erecting & terminating PVC armoured cable 2 core 2.5 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-1)

Making trench in soft soil of suitable width and depth as per IS for laying provided L.T cable up to 25 sq mm complete. As per specification No. CW-EXN-CTR(16-1-1) street light & mseld main

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification No. EA-EP.(9-1-4)

Supplying & erecting FRP box of size 150mmx 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB…(7-8-10)

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing PVC armoured cable on wall/pole as per specification No. CBCEo..CB-CE (7-6-2)

Providing cement concrete foundationincluding excavation for the poles (45 cm x 45 cm x 1.2 m) deep in 1:3:6 cement concrete (20 to 25 mm stone metal) and 45 cm x 45 cm x 45 cm / 45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner. (for 6 m pole). (16-3-1)

Supplying and erecting LED street light fitting suitable above 26W to 36W lamp, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete as per specification No FG-ODF/FLS2 ( 2-9-3)

Supplying and erecting Street light bracket for erection of side entryfitting on pole with 25 mm. dia. ‘B’ grade G.I. pipe of required lengthcomplete as per specification no. FGBKT/ SLB (2-6-10)

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (1-3-5).

Supplying, erecting and marking enclosure Single pole and neutral distribution board (SPNDB) one way for SPMCB 1 No on iron/ G.I. frame/wooden board as per specification No. SW-SWR/MCBDB (5-4-13).

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SWSWR/ MCB (5-3-2)

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SWSWR/ MCB (5-3-6)

Supplying, erecting & terminating PVC armoured cable 4 core 35 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-23) mseld main

Supplying and erecting flood light luminaries suitable for 70WH.P.S.V. lamp complete with accessories on provided bracket as perspecification no. FG-ODF/GSL(2-8-21)