REPAIRS REPLACEMENT OF LT FEEDER PILLAR BOX, SERVICE CONNECTIONS, LT UG CABLES AND OTHER CONNECTED ACCESSORIES UNDER GE I BELGAUM

Amount

Site clearance by clearing of bushes, shrubs, small plants, branches, vegetations and the like all as specified and directed.

Surface excavation n. exc. 30cm deep and averaging 15cm deep in soft/ loose soil all as specified and directed.

Excavating in trenches n. exc. 1.5m wide and n exc 1.5m depth and getting out in soft/ loose soil for laying cables, pipes, etc. all as specified and directed.

Excavating in trenches n. exc. 1.5m wide and n exc 1.5m depth and getting out in hard/ dense soil, road cutting, etc. for laying cables, pipes, etc. all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers n.exc 25cm thick all as specified and directed.

Removing excavated soil to a distance n exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

M&L for 20mm graded stone aggregate, spreaded evenly on ground around electrical equipments all as specified and as directed.

M&L for double wall corrugated HDPE pipes, conforming to IS-14930-2001, ISI marked, 63mm outer dia, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches/ under roads/ crossing etc. all as specified and as directed.

All as described in item No. 08 but 120mm outer dia HDPE pipes

M&L for GI tubes, light grade, 40mm bore, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches / under roads/ crossing etc. all as specified and as directed.

All as described in item No. 10 but 80mm bore GI tubes

All as described in item No. 10 but 100mm bore GI tubes

M&L for XLPE insulated, armoured, heavy duty electric HT UG cable with multi-stranded aluminium conductor, 11000 Volts grade, cross sectional area 185 Sqmm x 3 core, suitable for 11 KV (Earthed system), laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up , testing and commissioning complete including taking down existing unserviceable cable of any description all as specified and as directed. Note: Excavation, earth work, HDPE/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

All as described in item No. 13 but cross sectional area of cable 120 Sqmm x 3 core

All as described in item No. 13 but cross sectional area of cable 95 Sqmm x 3 core

M&L for XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 240 Sqmm x 3.5 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up , testing and commissioning complete including taking down existing unserviceable cable of any description all as specified and as directed. Note: Excavation, earth work, HDPE/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

All as described in item No. 16 but cross sectional area of cable 185 Sqmm x 3.5 core

All as described in item No. 16 but cross sectional area of cable 150 Sqmm x 3.5 core

All as described in item No. 16 but cross sectional area of cable 120 Sqmm x 3.5 core

All as described in item No. 16 but cross sectional area of cable 95 Sqmm x 3.5 core

All as described in item No. 16 but cross sectional area of cable 70 Sqmm x 3.5 core

All as described in item No. 16 but cross sectional area of cable 50 Sqmm x 3.5 core

All as described in item No. 16 but cross sectional area of cable 35 Sqmm x 3.5 core

All as described in item No. 16 but cross sectional area of cable 25 Sqmm x 3.5 core

All as described in item No. 16 but cross sectional area of cable 16 Sqmm x 4 core

All as described in item No. 16 but cross sectional area of cable 10 Sqmm x 4 core

All as described in item No. 16 but cross sectional area of cable 10 Sqmm x 2 core

M&L for outdoor heat shrinkable end termination joint, suitable for 3 core HT 11 KV XLPE insulated cables of size 120 Sqmm to 185 sqmm complete with jointing material and accessories all as specified and as directed

M&L for indoor heat shrinkable end termination joint, suitable for 3 core HT 11 KV XLPE insulated cables of size 120 Sqmm to 185 sqmm complete with jointing material and accessories all as specified and as directed

M&L for heat shrinkable straight through joint, suitable for 3 core HT 11 KV XLPE insulated cables of size 120 Sqmm to 185 sqmm complete with jointing material and accessories all as specified and as directed

M&L for heat shrinkable straight through joint, suitable for 3 core HT 11 KV XLPE insulated cables of size 50 Sqmm to 95 sqmm complete with jointing material and accessories all as specified and as directed

M&L for heat shrinkable straight through joint, suitable for 3.5 core LT 1.1 KV XLPE insulated cables of size 240 Sqmm to 300 sqmm complete with jointing material and accessories all as specified and as directed

M&L for heat shrinkable straight through joint, suitable for 3.5 core LT 1.1 KV XLPE insulated cables of size 120 Sqmm to 185 sqmm complete with jointing material and accessories all as specified and as directed

M&L for heat shrinkable straight through joint, suitable for 3.5 core LT 1.1 KV XLPE insulated cables of size 50 Sqmm to 95 sqmm complete with jointing material and accessories all as specified and as directed

M&L for heat shrinkable straight through joint, suitable for 3.5 core LT 1.1 KV XLPE insulated cables of size 25 Sqmm to 35 sqmm complete with jointing material and accessories all as specified and as directed

M&L for heat shrinkable straight through joint, suitable for 3.5/4 core LT 1.1 KV XLPE insulated cables of size 6 Sqmm to 16 sqmm complete with jointing material and accessories all as specified and as directed

M&L for heat shrinkable straight through joint, suitable for 2 core LT 1.1 KV XLPE insulated cables of size 6 Sqmm to 16 sqmm complete with jointing material and accessories all as specified and as directed

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size and including painting two coats with aluminium paint over one coat of primer including taking down existing unserviceable mild steel sections of any description and size all as specified and as directed

M&L for preparation of old painted steel surfaces exc. 10 cm in width or girth and painting with two coats of synthetic enamel paint all as specified and directed.

M&L for Rubber insulating mat for HT 11 KV, 2m x 1m size, 25 mm thick including taking down old one complete all as specified and directed.

M&L for Rubber insulating mat for LT 1100 Volts, 2m x 1m size, 12 mm thick including taking down old one complete all as specified and directed.

Fabricating, supplying, installing, testing and commissioning of LT Feeder Pillar Box, outdoor type, factory made from CPRI approved manufacturer, 415 volts , 50Hz, 3 phase, 4 wire system, made out of 3 mm thick CRCA sheet, totally enclosed, weather, vermin and dust proof, both sides operated with inner shutter and outer double door with locking arrangement and ventilator slots, cable trays, incoming/ outgoing cable glands, thimbles, lugs, etc. of suitable size, danger board, etc. and painting with epoxy powder coated over a coat of red oxide zinc chromate primer suitable to accommodate and including the following mentioned fittings with internal copper wiring complete including 50x50x5mm size MS angle frame fixed 300mm above GL and 450mm below GL duly grouted in and including PCC foundation 1:3:6 type C1 of suitale size and depth including taking down existing feeder pillar box of any description capacity and type and re-fixing the existing cables to new panel all as specified and as directed.

(a) Aluminium bus bar of 1200 Amps rating for 3 phase & 600 Amps rating for neutral - 1 Set (b) Digital MCCB 4 pole 415 Volts 50 KA 630 Amps with microprocessor release - 01 No. (Incoming) (c) MCCB 4 pole 415 Volts 36 KA 250 Amps with adjustable thermal & magnetic release - 05 Nos. (Outgoing) (d) MCCB 4 pole 415 Volts 25 KA 63 Amps with adjustable thermal & magnetic release - 02 Nos. (Outgoing) (e) LED Indicating lamps indicating R, Y, B -01 Set (f) Digital Multifunction meter for reading volts, ampere, frequency, energy, PF with CTs & PTs- 01 Set (g) Long range integrated meter 3 phase thread through 40-200A DLMS type integrated CT meter with inbuil modem: Make L&T

DHAIRYASIL RAMAKANT DESAI

M/S MAHADEV M PATIL

M/s. VIJAY ELECTRICALS