Providing and Installation of Open Gym Equipment at Durgapur Exploration Camp of CMPDI RI-IV at Durgapur Colony, Chandrapur, Maharashtra.

Amount

SCHEDULED ITEMS -PART A

UNSCHEDULED ITEMS -PART B

Fun Walker Single , Specification: Main frame: 100 NB G.I B-Class pipe-Jindal or equivalent make Leg frame: 32 NB G.I B-Class pipe-Jindal or equivalent make Handle frame: 25 NB G.I B-Class pipe –Jindal or equivalent make Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP Roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe end cap: Galvanised Cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Nut bolts: Galvanised nut bolts Nut bolts cap: Nylon 66 injection moulded. Bearings: Permanent sealed of reputed make (FAG/SKF) Powder coat: Done by first coat of Primer – Jotun or equivalent Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.Product Area : 4.8'Ft x 2.1'Ft Including Carriage and fixing with Heavy base foundation and grouting on ground with 150mm sand & residual part of plain cement concrete (1:2:4 ) pedestal in required size (Minimum size of 450*450*600 mm ) , disposal of material within 50m lead complete as per direction of Engineer in charge.

Shoulder Twirl Double , Specification: Main frame: 100 NB G.I B-Class pipe -Jindal or equivalent make Wheel frame: 25 NB & 20 NB G.I B-Class pipe -Jindal or equivalent make Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Nut bolts: Galvanised nut bolts Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Bearings: Permanent sealed of reputed make (FAG/SKF) Powder coat: Done by first coat of Primer – Jotun or equivalent Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.Product Area : 3'Ft x 2.1'Ft Including Carriage and fixing with Heavy base foundation and grouting on ground with 150mm sand & residual part of plain cement concrete (1:2:4 ) pedestal in required size (Minimum size of 450*450*600 mm ) , disposal of material within 50m lead complete as per direction of Engineer in charge.

Chest Press , Specification: Centre Frame: 100 NB G.I B-Class pipe-Jindal or equivalent make Main frame: 40 NB & 32 NB G.I B-Class pipe -Jindal or equivalent make Handle frame: 32 NB & 25 NB G.I B-Class pipe -Jindal or equivalent make Connecting pipe: 32 NB & 25 NB & 40 NB G.I B-Class pipe -Jindal or equivalent make Seat & Back Rest: LLDP Roto moulded seat with inbuilt bolts 3/8" x 1.5" Stopper: PU Rod. 50 mm dia Pipe Cap: Galvanised cap Bearing Cap: Cap for 100 NB -Nylon 66 injection moulded Bearing housing and pin: Seamless pipe & Round bar Bearings: Reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Powder coat: Done by first coat of Primer – Jotun or equivalent Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.Product Area : 3.6'Ft x 2.8'Ft Including Carriage and fixing with Heavy base foundation and grouting on ground with 150mm sand & residual part of plain cement concrete (1:2:4 ) pedestal in required size (Minimum size of 450*450*600 mm ) , disposal of material within 50m lead complete as per direction of Engineer in charge.

Shoulder Press , Specification: Centre pipe: 100 NB G.I B-Class pipe Seat frame: 32 NB G.I B-Class pipe Main frame: 40 NB G.I B-Class pipe Handle frame & Leg rest: 32NB & 25NB G.I B-Class pipe with two handles Handle cover: Nylon 66 injection moulded. Seat & Back Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5". Stopper: PU Rod. 50 mm dia Pipe Cap: Galvanised cap. Bearing Cap: Cap for 100 NB -Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & round bar Bearings: Reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Powder coat: Done by first coat of Primer – Jotun or equivalent Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron. Product Area : 3.6'Ft x 2.3'Ft Including Carriage and fixing with Heavy base foundation and grouting on ground with 150mm sand & residual part of plain cement concrete (1:2:4 ) pedestal in required size (Minimum size of 450*450*600 mm ) , disposal of material within 50m lead complete as per direction of Engineer in charge.

Fun Rower , Specification: Main frame: 80 NB G.I B-Class pipe Jindal or equivalent make Seat frame: 50 NB G.I B-Class pipe -Jindal or equivalent make Handle frame: 32 NB G.I B-Class pipe -Jindal or equivalent make Seat Rest, Back Rest & Foot Rest: LLDP rotomoulded seat with inbuilt bolts 3/8" x 1.5" Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Nut bolts: Galvanised nut bolts Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Bearings: Permanent sealed of reputed make (FAG/SKF) Powder coat: Done by first coat of Primer – Jotun or equivalent Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron. Product Area : 4.7'Ft x 2.5'Ft Including Carriage and fixing with Heavy base foundation and grouting on ground with 150mm sand & residual part of plain cement concrete (1:2:4 ) pedestal in required size (Minimum size of 450*450*600 mm ) , disposal of material within 50m lead complete as per direction of Engineer in charge.

Leg Press Double , Specification: Centre pipe: 100 NB G.I B-Class pipe -Jindal or equivalent make Seat frame: 32 NB G.I B-Class pipe Jindal or equivalent make Seat & Back Rest: LLDP Roto moulded seat with inbuilt bolts 3/8" x 1.5" Foot Rest: LLDP Roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe Cap: Galvanised caps Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Bearings: Reputed make (FAG/SKF) Stopper: PU Rod. 50 mm dia Nut bolts cap: Nylon 66 injection moulded. Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer – Jotun or equivalent Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron. Product Area : 6.6'Ft x 1.8'Ft Including Carriage and fixing with Heavy base foundation and grouting on ground with 150mm sand & residual part of plain cement concrete (1:2:4 ) pedestal in required size (Minimum size of 450*450*600 mm ) , disposal of material within 50m lead complete as per direction of Engineer in charge.

Ski Trainer , Specification: Main frame: 100 NB G.I B-Class pipe. -Jindal or equivalent make Foot Rest pipe: 40 NB G.I B-Class pipe -Jindal or equivalent make Handle: 40NB & 25 NB G.I B-Class pipe -Jindal or equivalent make Connecting pipe: 25 NB & 40 NB G.I B-Class pipe -Jindal or equivalent make Foot Rest: LLDP Roto moulded with inbuilt bolts 3/8" x 1.5" Pipe Cap: Galvanised cap. Bearing Cap: Cap for 100 NB -Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Bearings: Reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Powder coat: Done by first coat of Primer – Jotun or equivalent Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron. Product Area : 3.4'Ft x 2'Ft Including Carriage and fixing with Heavy base foundation and grouting on ground with 150mm sand & residual part of plain cement concrete (1:2:4 ) pedestal in required size (Minimum size of 450*450*600 mm ) , disposal of material within 50m lead complete as per direction of Engineer in charge.

Leg Extension , Specification: Centre pipe: 100 NB G.I B-Class pipe -Jindal or equivalent make Seat frame: 32 NB G.I B-Class pipe -Jindal or equivalent make Leg lever - 32 NB G.I B-Class pipe -Jindal or equivalent make Seat & back rest: LLDPE Roto moulded seat with inbuilt bolts 3/8" x 1.5" Handle cover: nylon 66 injection moulded. Powder coat: First coat done of primer – Jotun or equivalent brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron. Product Area : 2.7'Ft x 2.4'Ft Including Carriage and fixing with Heavy base foundation and grouting on ground with 150mm sand & residual part of plain cement concrete (1:2:4 ) pedestal in required size (Minimum size of 450*450*600 mm ) , disposal of material within 50m lead complete as per direction of Engineer in charge.

Total impact of GST for the purpose of CTC

SUKHKARTA ENTERPRISES

DYNAMIC INDIA CONSTRUCTIO

SHEDAME CONSTRUCTIONS

ARJUNA SPORTS INTERNATIONAL