PROVISION OF SENTRY POST, GUARD ROOM, TOILET AND BATHROOM AT TARAPORE GATE AND UMRAO GATE AND STORM WATER DRAINAGE IN NAPIER LINE AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.

Amount

Excavating over areas n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

All as per item No.1.00 above but exc 1.5 m depth.

Surface Dressing in soft/loose soil not exceeding 15 cm deep and getting out complete as all spfd and directed.

Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and as directed.

Removing excavated soil exceeding 250 m but n exc 500m distance and depositing where directed at a level n exc 1.5 metre above the starting point . complete all as specified and directed.

M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and as directed.

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for Treating the top surface of filled earth as in floor at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for RCC M-25 Design mix using 20 mm graded stone aggregate in Beams, Cantilevers, bressurmmers, Lintels over 1.5 m span complete as all spfd and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like, complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in chajjas, shelves etc and the like, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface complete all as specified and as directed

Form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and as directed

Form work to soffits of suspended slabs such as roof slab etc. n.exc. 200mm thick for fair finished surfaces of concrete complete all as specified and directed.

Form work to chullah hood, chajjas, troughs and similar items including edges complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed

S&F TMT bars of 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and directed.

S&F Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips as in strriups,spaces,nibs and binders complete all as specified and as directed.

M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed

M&L for half brick thick wall fly ash bricks (old size), straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed

M&L for 5 mm thick rendering in CM 1:3 on ceiling surface plaster complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work finished even and fair without using extra cement complete all as specified and as directed

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface,finished even and fair complete all as specified and directed.

Preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified.

Preparation of newly plaster surface of wall and applying two coats of oil bound distemper on 2 mm thick wall putty complete all as specified and directed.

Preparation of newly plaster surface of wall and applying two coats of weather coat paint including one coat of primer complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including necessary formwork and cutting of joints complete all as specified.

M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in surface channel or surface drain or coping including forming and finishing with extra cement including taking down existing concrete complete all as specified and directed.

S&F for kota stone slab 18-20 mm thick in riser of steps, skirting, dado and on pillars,fixed over and including 10 mm thick rendering in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including polishing complete all as specified and directed.

M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18sqm but n exc 0.36 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles in vertical surface 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18sqm but n exc 0.36 sqm,in skirting set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick plastering in CM (1:6) complete all as specified and directed.

M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. (Note : WPC to be mesured and paid separately under appropriate item)

Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, SmartCare PU Magnum membrane with an elongation of 550% and tensile strength of 2.5 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min. 45 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare PU Magnum or approved equivalent in two coats with a consumption of 1.5 Kg per Sqm on a primed surface with SmartCare Primer and a 40 GSM geo textile cloth sandwiched in between, etc complete as per Manufacturer's specifications

Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face supplying and fixing in frame at site complete all as specified and directed.

S&F Aluminium section powder coated of colour as approved fixed type ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and as directed.

M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F Aluminium section powder coated of colour as approved openable sliding type three track window/ventilators with sliding shutter and frame with aluminium section of size including 5 mm thick tinted glass and mosquito proofing net as indicated below complete all as specified & directed (i) Frame section 92 X 29.5 X1.2mm (ii) Shutter top bottom and side rails 40 X 20 X 1.2mm (iii) Glass 5 mm thick one side reflective glass and other side visible of with rubber gasket with clips and hold fast 04 nos for each window including necessary handles, tower bolt etc. complete (iv) Aluminium grill 7.5 mm dia design no. DG - 102 make DEDO grill or design no AL - 103 make fixed to aluminium section 50X20X1.5 mm in existing opening. (v) stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with tinted tacks or galvanized wire staples complete .

S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F vitreous china white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water colset white seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated of aluminium hinging device complete all as specified and directed.

S&F WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

S&F in repair vitreous china counter top wash basin, white, oval shape of size 600x400x185mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. Make: Hindware cat part No. 10038.

M&L for Granite 20mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F CP bottle trap (with internal partition 32 mm Size with 300 mm & 190 mm long wall connection pipe and wll flange complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, with CP spreader etc complete all as specified and directed.

M&L for 500 ltr rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F for 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 20mm-210 gms)

S&F 15mm bore GI tubes 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore GI tubes 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and directed.

S&F 25mm bore GI tubes 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and directed.

S&F for 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F CP angle stop valve or cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed..

S&F fancy type Pillar tap 15mm bore, cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F PVC connection 15mm bore 60cm long with brass nut at each side complete all as specified and directed.

S&F 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all specified and as directed.

S&F 15 mm bore CP fancy stop valve (Concealed type) with long shanks and cup fixed with pipes complete all as specified and directed.

S&F 125 mm size fancy type chromium plated shower rose with swivel joints and connecting rod including fixing to steel pipe or union complete all as specified and directed please.

S&F for PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F for 15mm dia health faucet abs body with 08 mm dia, 01 mtr long flexible tube & wall hook complete all as specified and directed.

S&F Stainless steel toilet paper holder fancy type complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints laid in trench or in floor complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 100 mm outlet dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

M&L for Earthwork in excavation in foundation in trenches exc. 1.5 m. wide and exc. 1.5 m depth in soft/loose soil and getting out complete as complete all as specified and directed.

Removing excavated material (soil) exc. 500 mt and n.exc 1.5 Km and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 20 mm graded aggregates as in plinth protection and path and finishing even & smooth without using extra cement laid in bays complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 using 40 mm graded stone aggregate as in foudation filling and mass concrete complete all as specified and directed.

M&L for 40 mm thick PCC(1:2:4) type B-1 using 20 mm graded stone aggregate for floor finishing cement concrete surface even and smooth with using extra cement laid in panels complete all as specified and directed.

M&L for 38 mm width & 3 mm thick glass dividing strips for laying in floor in panels complete all as specified and directed.

M&L for Rendering 15 mm thick in CM(1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement including water proofing compound @ 3% by weight complete all as specified and directed by Engineer-in-Charge. (Note:- WPC shall be measured & Paid seperately).

M&L for preparation of new plastered surfaces and applying three coats of white wash on Wall complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilling complete all as specified and directed.

M&L for plaster 20 mm thick in one layer CM(1:4) on concrete surface over roof slab finished even and smooth without using extra cement including water proofing compound @ 3% by weight of cement over and including application of cement slurry @3kg/sqm after cleaning,sweeping the RCC slab to remove dust before application of plaster complete all as specified and directed. (Note:- WPC shall be measured and paid seperately)

Supply only Integral waterproofing compound complete all as specified and directed.

Dismantling fencing wire, mesh, any type complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft soil , complete all as specified and directed.

M&L for PCC (1:3:6) type C2 using 20 mm graded stone aggregate Cement concrete in foundations, filling and mass concrete , for fixing posts complete all as specified and directed.

S&F for Fe- 290 Gde E- 165 Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, dia of shank 5 to 10mm length of bolt each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm length long complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only chain link fencing complete all as specified and directed.

M&L for galvanized 2 strand 2.24 mm dia steel barbed wire, barbed with 2mm dia barbs at 75mm (approx) spacing and straining and fixing to any type of post, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and as shown on the drawing including straining bolts complete all as specified, directed and shown on drawings. Note:-Each line of wire to be measured separately

M&L for 10 mm dia mild steel round bar provided for tightening of chain link fencing complete all as specified and directed.

Preparing new or previously untreated steel & iron surfaces of any description over n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and directed.

Surface excavation n exc 30 cm deep and above 15 cm avg deep and getting out in soft/loose soil complete all as specified and directed

M&L for 75mm thick PCC, type B- 2, 1:2:4 (40mm graded aggregate) as in sub base in path, hard standing complete all as specified and directed.

M&L for chequered cement concrete tiles (ultra coloured, vibratory compacted factory made tiles) of 300mm X 300mm X 22 to 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for providing old size sub class 'B' bricks laid perpendicular to the cable abutting each other all as specified and directed by the Engineer-in-charge.

Supply, lay, jointing and testing XPLE insulated LT under ground cable, size 16 Sqmm 2 core, 1100 volts grade heavy duty, armoured with multi stranded aluminium conductor laid in trenches/ ducts, in pipes or on poles etc complete all as specified and as directed.

Cutting of existing main distribution GI pipe 40mm dia and inserting tee 40x40x25 mm, etc. including necessary all connected accessories for tapping 25 mm connection complete all as specified and directed.

S&F for gate valve 25 mm dia with iron wheel head, screwed both ends for GI pipe complete all as specified and directed.

S&F for gate valve 50 mm dia with iron wheel head, screwed both ends for GI pipe complete all as specified and directed.

Supply and lay GI pipe medium grade complete including fittings for 50 mm dia laid in trenches or wall complete all as specified and directed.

M&L for 80 mm thick M-40 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over on sand cushion and joints filling with sand complete all as specified and directed.(Sand cushion shall be measured and paid seperately)

M&L for sand filling under floors or in foundations including watering & consolidation complete all as specified and a directed.

M&L for precast RC pipes, 150 mm bore, class- NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in foundation of manholes complete all as specified and directed.

M&L for Brick work with fly ash, old size straight or curved on plain not exc. 6 mtr mean radius built in cement mortar (1:4) for wall complete all as specified and directed.

Extra over for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends complete all as specified and directed. (Note: Inner girth shall be measured)

M&L for Fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. (Exceeding 30cm)

M&L for Precast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole/ drain cover slab set in cement mortar 1:4 complete all as specified and directed.

On site LLDPE septic tank designed to carry sewage & sullage water,excavation in any type of soil,PCC 1:4:8 below foundation .vent shaft,connection etc complete for users .

S&F Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches 75mm dia complete all as specified and directed.

Dismantling Stone slabs and tiles (Paver block) of any description or thickness in floors,aprons etc. including sand cushioning complete all as specified and directed.

Demolition of cement concrete including tiles if any of any size n exc 15 cm thickness (below or above ground level) unreinforced complete all as specified and directed.

Fixing only interlocking paver block of any thickness retrived from demolition against item No. 127 herein above and laid over on sand cushion and joints filling with sand complete all as specified and directed.(Sand cushion shall be measured and paid seperately)

M&L for concealed point wiring on wall /ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor following colour code in and including PVC conduit of medium grade with all fittings such as bend, tees, junction boxes etc. including Modular metal flush box, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, and 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor (green) connected to common earth dolly and including cutting chases in walls / floors for concealed conduit complete all as specified and directed for the following:-

One light, fan, bell point controlled by one switch.

One 3 pin switch socket outlet point 5 Amps on same board with other switch.

One 3 pin switch socket outlet point 5 Amps on independent board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and directed.

Supply and fixing switch flush type single pole one way 5 Amps 240 volts, white finish complete all as specified and directed.

Supply and fixing socket outlet 2 in 1, 5 pin, 5 Amps flush type white finish complete all as specified and as directed.

Supply and fixing socket outlet 2 in 1, 6 pin, 6/16 Amps flush type white finish complete all as specified and as directed.

Supply and fixing switch flush type single pole one way 16 Amps 240 volts, white finish complete all as specified and directed.

Supply and fixing for ceiling rose surface PVC body three terminal. 65x50 mm complete all as specified and directed.

Supply and fixing lamp holder PVC body with back plate complete all as specified and directed.

Supply and Fixing step type electronic fan regulator single phase 230 volt, 120 watt, 2 module suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed.

Supply and fixing wall mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make : ORIENT ELECTRIC (Cat No : LBLN-20-C-AL) HALONIX (Cat No : HLB-03-20-CW-AL ) Bajaj (Cat No : BCLSBAL 20W CW) or equivalent model in list of Makes mentioned in tender.

Supply and fixing LED light fitting mirror type with high out put diffuser (2 feet long), 10 watt 220 V AC, poly carbonate body and integrate electronic driver complete with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable complete all as specified and as directed. Make :- BAJAJ (Cat No : BCLSB 10 WH) Havells (Cat No : LHEXBTP7IN1W009) ORIENT ELECRTIC (Cat No : LBLN-10-C-SQ) or equivalent model in list of Makes mentioned in tender.

S&F Wall / surface mounted type Bulk Head LED light fitting complete with LED lamp 10 watt , made of polycarbonate housing & enclosed with cover and integrate electronic driver complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make :- Halonix (Cat No :HLBH-03-10-CW) Havells (Cat No : HEXAFT10WLED857SSYMBOPC) Bajaj (Cat No :BIBWP 10W LED) or equivalent model in list of Makes mentioned in tender.

Supply & Fixing ceiling fan 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 % ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No complete all as specified and directed.

Supply and fix exhaust fan made of steel body complete with louvers shutters, 300 mm sweep, Air Delivery: 1250 CMH @ 1400 RPM, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing and including writing MES No complete all as specified and directed.

Supply and fix water heater storage vertical type, puff insulation type of 25 ltrs capactiy and 1500 watts, BEE Star rated-5, with glass line inner shell with Hot & Cold pipe, water connection pipe, electric connection and necessary fixing arrangement complete all as specified and directed.

Supply and fixing factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.

Supply and fixing MCB SP 240 volt 'C' curve 10 KA 5 to 32 Amps capacity complete all as specified and directed including taking down old one.

Supply and fixing MCB SPN 240 volt 'C' curve 10 KA 16 to 32 Amps complete all as specified and directed .

M/S CHANDRIKA PRASAD AND SONS

Channa Brothers and Co.