Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹31.6 LAccepted-AOC NO 7 3RD MAIN ROAD MUNI REDDY LAYOUT HORAMAVU MAIN ROAD BANASAWADI BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹32.7 LRejected-Finance NO 4 AC 114 EAST OF NGEF OPP THE KARNATAKA STATE APEX CO OPERATIVE BANK KASTURI NAGAR BANGALORE 560043 | BANGALORE | BANGALORE | KARNATAKA | 560043 | SECOND | Rejected-Finance BEING NOT LOWEST | |
| 3 | THIRD₹37.8 LRejected-Finance | THIRD | Rejected-Finance BEING NOT LOWEST | |
| 4 | FORTH₹38.6 LRejected-Finance 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | FORTH | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
21 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
ADDN/ALTN TO JOINERY AND KITCHEN BLDG AT VISHWA VIHAR CAMP OF ASTE UNDER GE AF MARATHAHALLI
2023_MES_585370_1
8612/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) MARATHAHALLI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (AF) MARATHAHALLI
₹86,000
Yes
13 May 2023
11 Mar 2023
26 Apr 2023
11 Mar 2023
21 Apr 2023
8 Apr 2023
Amount
Taking down old Kitchen cabinets of size n.exc 3.0mX0.6mX1m per cabinet including shutters, fittings, complete all as specified and as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) n.exc. 1.5 Sqm each all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5 sq.m but n exc 4 sq.m each all as specified and directed.
Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M & L for rendering 10 mm thick in cement mortar 1:6 finished even and smooth in walls without using extra cement etc complete all as specified and as directed.
M & L for two coats of oil bound distember over and including one coat of alkali resistant primer including preparation of newly plastered surfaces of wall complete all as specified and as directed
M&L High Density WPC Board (Wood-plastic composites board) of 18mm thick, fabricated & fixed with screws for cabinet boxes and shutters purpose including cutting, joining, etc & making good, as specified and as directed by Engineer-in-Charge. Note: Glass for cabinets will be measured and paid seperately as supply only item.
S&F Stainless steel cutlery rack of of length of 20" to 22", width of 14" to 16" & height of 4" to 5" incl supporting Telescopic Ball Bearing Drawer Channels of 10" on both sides of rack, complete all as specified and as directed.
S&F Stainless steel plate rack of of length of 20" to 22", width of 14" to 16" & height of 8" incl supporting Telescopic Ball Bearing Drawer Channels of 10" leghth (Payload capacity of 45kgs) on both sides of rack, complete all as specified and as directed.
S&F Stainless steel container rack of of length of 20" to 22", width of 4" to 6" & height of 15" to 18" incl supporting Telescopic Ball Bearing Drawer Channels of 10" leghth (Payload capacity of 30kgs) on both sides of rack, complete all as specified and as directed.
M&L modular hinges of any degree opening, as specified and as directed by Engineer-in-Charge.
S&F of modular Stainless steel handles of 4 inch size for cabinet purpose, complete all as specified and as directed by Engineer-in-Charge.
S&F Stainless Steel Door Catcher for cabinet purpose, complete all as specified and as directed by Engineer-in-Charge.
S&F factory made UPVC white colour Sliding window Three track Area not exceeding 2.00 sqm of each window, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories . (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose) complete all as specified and as directed.
S&F factory made UPVC door frame made of UPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge
Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer-in-charge.
Sai Ram Builders
SREE BALAJI CONSTRUCTIONS
G K CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .