Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAdmitted-Finance | ₹8.6 L | L1 | Admitted-Finance |
| 2 | L2₹9.3 L+₹73,259.72 (8.50%)Admitted-Finance | ₹9.3 L+₹73,259.72 (8.50%) | L2 | Admitted-Finance |
| 3 | L3₹10.3 L+₹1.6 L (19.1%)Admitted-Finance | ₹10.3 L+₹1.6 L (19.1%) | L3 | Admitted-Finance |
| 4 | L4₹10.8 L+₹2.2 L (25.6%)Admitted-Finance | ₹10.8 L+₹2.2 L (25.6%) | L4 | Admitted-Finance |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | M/s SHiv Yadav Constructions L1 | ASM CONTRACTOR L2 | NINE STONES L3 | HORIZON ENGINEERING SERVICES L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | standards of IS 1566/ IS 4849 with the following
key specifications apart from the other points in the governing specification:
iii. Panel size: 2500 mm X 915 mm (W x H). Tolerance of plus / - 2 %
Mesh Size: 50 mm X 150 mm (W X H). Tolerance of plus / - 2 mm
iv. Weld Shear strength: Minimum 50 % of the breaking strength of the smallest wire (In
this case the vertical wire)
v. Mesh Wire: Galvanized MS wire
Horizontal wire, Dia. 5.0 mm ( plus /- 0.05mm): Vertical wire, Dia. 5.0 mm( plus /-0.05mm)
Tensile Strength of wire: Min 500 N/sq.mm: Specification for wire: IS 280
vi. Galvanizing of wire: 100 – 120 GSM as per IS 4826 (Measurement as per IS 6745)
Uniformity of Coating: As per IS 2633: Adhesion test for coating: As per IS 2629 (1985)
vii. Powder Coating: The galvanized panels are subsequently single powder coated after
welding with a thickness of 60 to 80 microns.
viii. Colour: RAL 6005 (Military Green): Coating Standard: EN 10245-1/ IS 13871
ix. Make : Akzonobal / Jotun.
x. Other coating requirement: Powder coating should withstand 720 Hours of salt spray test
as per ISO 12944, 1000 hrs of QUV-B Weatherometer Test, Adhesion test,
Electrochemical Impedance Spectroscopy Test (Type Test Certificate for the coating
standards from renowned Laboratories clearly indicating that the coating passes C3 or
higher corrosion protections standard is to be submitted by the bidder along with technical
bid).
xi. Refer drawing of Panel, attached herewith. 25 mm pointed wires should be left on both
sides (top and bottom only), V-band range: 100 mm to 110 mm
xii. Qty: 400 Panels / KM
(b) Square Clamp
i. Type: Square Clamp with Side lock.
ii. Specification: 65X35MM
iii. Outer Diameter: 65 mm plus /- 1 %
iv. Thickness: 3.00 mm plus /- 10% (Medium G | 225 | Metre | 1,279 ₹2,87,775 Lowest | 1,700 ₹3,82,500 | 1,800 ₹4,05,000 | 1,950 ₹4,38,750 |
Tender Value
₹11.3 L
EMD Value
₹23,000
Closing Date
10 Jul 2026, 12:00 pmClosed
Sandeep Kumar
Municipal Corporation Gurugram
Estimate for providing and fixing weld mesh wire panels around the pond near Mata Mandir in village- bhondsi under Ward No. 19, M.C. Gurugram.Recall
2026_HRY_533301_1
2026752AE59E 41F7 4107 9C6F 5025B70160DA285ULB
Open Tender
Civil Works
Works
120 days
Gurugram
2 documents required · 2 mandatory
₹1,000
₹23,000
Yes
9 Sept 2026
3 Jul 2026
10 Jul 2026
3 Jul 2026
10 Jul 2026
3 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | standards of IS 1566/ IS 4849 with the following
key specifications apart from the other points in the governing specification:
iii. Panel size: 2500 mm X 915 mm (W x H). Tolerance of plus / - 2 %
Mesh Size: 50 mm X 150 mm (W X H). Tolerance of plus / - 2 mm
iv. Weld Shear strength: Minimum 50 % of the breaking strength of the smallest wire (In
this case the vertical wire)
v. Mesh Wire: Galvanized MS wire
Horizontal wire, Dia. 5.0 mm ( plus /- 0.05mm): Vertical wire, Dia. 5.0 mm( plus /-0.05mm)
Tensile Strength of wire: Min 500 N/sq.mm: Specification for wire: IS 280
vi. Galvanizing of wire: 100 – 120 GSM as per IS 4826 (Measurement as per IS 6745)
Uniformity of Coating: As per IS 2633: Adhesion test for coating: As per IS 2629 (1985)
vii. Powder Coating: The galvanized panels are subsequently single powder coated after
welding with a thickness of 60 to 80 microns.
viii. Colour: RAL 6005 (Military Green): Coating Standard: EN 10245-1/ IS 13871
ix. Make : Akzonobal / Jotun.
x. Other coating requirement: Powder coating should withstand 720 Hours of salt spray test
as per ISO 12944, 1000 hrs of QUV-B Weatherometer Test, Adhesion test,
Electrochemical Impedance Spectroscopy Test (Type Test Certificate for the coating
standards from renowned Laboratories clearly indicating that the coating passes C3 or
higher corrosion protections standard is to be submitted by the bidder along with technical
bid).
xi. Refer drawing of Panel, attached herewith. 25 mm pointed wires should be left on both
sides (top and bottom only), V-band range: 100 mm to 110 mm
xii. Qty: 400 Panels / KM
(b) Square Clamp
i. Type: Square Clamp with Side lock.
ii. Specification: 65X35MM
iii. Outer Diameter: 65 mm plus /- 1 %
iv. Thickness: 3.00 mm plus /- 10% (Medium G | 225 | Metre | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.79 MB
BOQ_612373.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .