REWIRING AND REPAIR / MAINT OF INTERNAL ELECT IN INF BDE AREA AT NAMS

Amount

Taking down aluminium point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M&L for point wiring with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FRLS unsheathed and multi stranded copper conductor cable in and including new PVC Concealed conduit 20mm dia 1.5mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick hylem sheet top cover, sheet screws and sunken boxes after removing old unserviceable plastic laminated sheeet and sunken boxes included 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc for one light /fan/ buzzer point controlled by one 5 Amp switch one way complete all as specified and directed Note :(i) The cost of sunken boxes and bakellite sheet is included in the quoted rate (ii) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc all as directed.

All as per item No 3 here-in-before but one light /fan/ buzzer point controlled by one 5 Amp switch two way

All as per item No 3 here-in-before but one three pin socket outlet 5 Amps independent board complete

All as per item No 3 here-in-before but one three pin 5 Amps socket outlet on the same board with other switches

All as per item No 3 here-in-before but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete.

M&L for Point wiring for MT Garages/Tank garages/hangers with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FRLS unsheathed and multi stranded copper conductor cable in and including new PVC Concealed conduit 20mm dia 1.5mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick hylam sheet top cover, sheet screws and sunken boxes after removing old unserviceable laminated sheeet and sunken boxes included 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc for one light /fan/ buzzer point controlled by one 5 Amp switch one way complete all as specified and directed Note : The cost of sunken boxes and bakellite sheet is included in the quoted rate)

All a per item No 8 here-in-before but one three pin socket outlet 5 Amps independent board complete

All a per item No 8 here-in-before but one three pin 5 Amps socket outlet on the same board with other switches

All a per item No 8 here-in-before but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.

M&L for point wiring concealed type with PVC insulated (unsheathed ) cable 1.5 Sq mm (Nominal area) multi stranded FRLS copper conductor 1100 V grade & continuous earth wire PVC insulated 1.5 Sq mm copper stranded conductor connecting to common earth in and existing PVC conduit and existing sunken box but fixing new 3mm thick hylem sheet top cover,sheet screws and after removing old unserviceable hylem sheet (including cutting chases & making good the disturbed surface) for one light /fan/ buzzer point controlled by one 5 Amp switch one way complete all as specified and directed. Note : The cost of bakellite sheet , sunken boxes is included in the quoted rate)

All as per Srl item No 12 here in before but for one 5 amps socket out let independent complete all as specified.

All as per Srl item No 12 here in before but on the same board completeall as specified

All a per item No 12 here in before but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and Fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and Fixing switch piano 6 Amps type two way 230 volts AC complete all as specified and as directed

Supply and fixing in replacement ceiling rose 65X50 mm two to three terminals complete all as specified.

Material and labour for replacement of lamp holder insulated body with 9 Watt LED Bulb, back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm 230V AC cool day light 6500K having maximum height 1020mm heavy duty complete all as specified.

Supply and fixing in replacement fan regulator, electronic step type heavy duty socket type 230 volts complete all as specified and as directed.

Supplyand fixing in replacement of MCB single pole 6 to 32 Amps all as specified and directed.

S & F in replacement of MCB 40-63 amps single pole with neutral, AC 230 volts complete all as specified and directed.

Supply and Fixing in replacement Bell push flush type 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and fixing in replacement of bell ding dong type AC 230 volts complete all as specified and as directed

Supply & fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed.

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

Supply and fixing in replacement of MCCB 100 Amps , AC 415 Volts 36KA 4 pole including making connections with suitable size of aluminium lugs all as specified and directed.

Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. (Note:- Out going MCB shall be measured and paid for separately)

M&L in replacement of sub main wiring 6 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 6 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed

M&L in replacement of sub main wiring 4 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 4 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed

M&L in replacement of sub main wiring 2.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 2.5 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Note:- Contractor will give gurantee certificate for 01 years and replace complete item in case of any fault. No extra cost will be paid to the contractor for the same.

Supply and fixing in replacement of LED T-8 tube light fitting with single side connection polycarbonate LED tube rod 18/20W 4 feet with CRCA box Suitable box complete including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed. Note:- Contractor will give gurantee certificate for 01 years and replace complete item in case of any fault. No extra cost will be paid to the contractor for the same.

Supply and fixing round shape 12 watt 220 volts AC recessed/ Surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note:- Contractor will give gurantee certificate for 01 years and replace complete item in case of any fault. No extra cost will be paid to the contractor for the same.

Supply & fixing in replacement of AMAZE Square/Round recess mounted down lighter 15 Watt including separate replaceable electronic driver celling cut out 106mm x 106mm height 33mm square shaped polycarbonate fixture complete all as specified and directed. Note:- Contractor will give gurantee certificate for 01 years and replace complete item in case of any fault. No extra cost will be paid to the contractor for the same.

Supply & fixing in replacement of AMAZE Square/Round recess mounted down lighter , 18 Watt including separate replaceable electronic driver celling cut out 158mm x 158mm height 33mm square shaped polycarbonate fixture complete all as specified and directed. Note:- Contractor will give gurantee certificate for 01 years and replace complete item in case of any fault. No extra cost will be paid to the contractor for the same.

Supply & fixing in replacement of AMAZE Square/Round recess mounted down lighter , 15 Watt including separate replaceable electronic driver celling cut out dia 138 mm height 13mm round shaped polycarbonate fixture complete all as specified and directed. Note:- Contractor will give gurantee certificate for 01 years and replace complete item in case of any fault. No extra cost will be paid to the contractor for the same.

Supply & fixing in replacement of integral LED Bollards 10 WATT complete with black finish cylindrical shaped, unique design, integral decorative bollard with clear/opal acrylic for single/twin compact fluorescent lamp complete all as specified and directed .

Supply & fix in replacement of LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens. Note:- Contractor will give gurantee certificate for 01 years and replace complete item in case of any fault. No extra cost will be paid to the contractor for the same.

Supplying and fixing in replacement LED bulk head light fittings 10watt white including LED strip as per IP65 in enginnering plastic housing withclear prismatic diffuser and making necessary connections complete all as specified.

Supply and fixing looking mirror light decorative type wall mounting SS finish fixture with opal glass diffuser suitable for 10W incandescent lamp with lamp complete all as specified and directed.

Supply only in replacemnt LED tube Rod 18/20W, 1.2 mtr length output 6000 to 6500 lumens 220V AC white effect complete all as specified and directed by Engineer-in -charge.

Supply and fixing Exhaust fan AC 230Volts 250mm ventilair DX high quality engineering plastic complete with louvers and shutters complete all as specified and directed .

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing in replacement bracket made out of GI pipe 50/ 40 mm medium grade 1.2 mtr long made to shape with fixing clamps of MS flat 40x6mm nut bolts etc for street light all as specified and directed

Supply & fixing in replacement of post top lantern 35 WATT LED RUBY CLEAR OF HAVELLS complete with black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories and suitable for LED lamp complete all as specified and directed

S& F in replacement tube light fitting LED 25W inverter batten with inbuilt LI LON BATTERY type fitting 4 feet long aluminium housing, charging time 10-12 hours with 3 hours backup IP20, rated volatge 230 V, 50Hz system of wattage 20W (+/- 10%), current less than 1.2 mA, power factor more than 0.95 and system lumen efficeincy of 100 lm/watt, CCT of 6500 K, CRI > 80, THD < 30%, driver efficeincy more than 85% complete all accessories prewired and connections electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor wire of size 0.75 sqmm 3 core all as required at site.Engr-in-Charge. Notes:-1) Required LM 79 AND LM 80 Reports from led manufacturer Note: 2- Contractor will give gurantee certificate for 01 years and replace complete item in case of any fault. No extra cost will be paid to the contractor for the same.

S&F in replacement LED T-5 Batten tube light fitting. ,1x22w, input voltage 90volt -300 volt, Energy efficient, , aluminum housing etc complete , all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note:- Contractor will give gurantee certificate for 01 years and replace complete item in case of any fault. No extra cost will be paid to the contractor for the same.

Supply & Fix in repair flood Light Luminaire 150 watt with .high power SMD LED cool white, CRI 75,+/- 5% supply voltage 220/ 240/ 50 Hz, light engine driver base.pole adapter, pressure die cast LM6 diffusor:injection model polycarbonate, powdre coated in IP 66 Incliding protection over temperature should be from the same manufacturer Product.

Supply & Fix in repair flood Light Luminaire 2000 watt with .high power SMD LED cool white,CRI 75,+/- 5% supply voltage 220/240/ 50 Hz, light engine driver base.pole adapter, pressure die cast LM6 diffusor:injection model polycarbonate, powdre coated in IP 66 Incliding protection over temperature should be from the same manufacturer Product.

Supply and Install in replacement of Off Load Change over switch 415 Volts in sheet metal enclouser 4 Pole of capacity minimum 100 Amps complete all as specified and directed.

Supply and fixing in replacement of 40mm dia tube light grade galvanised with all fittings complete to wall or for garden lights or laid in floors for cable protection including cutting chases and necessary brick work and plaster work to making good the distributed surface complete all as specified and directed.

Material and labour for PCC (1:3:6) TYPE C-2 using 40mm graded stone aggregate as in foundation / coping of light complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

M&L for taking down the existing faulty single phase tamper proof Electronic Energy meter with LCD display 230 volts 4 wire system, 10-60 amps, 50 Hz, replacing the unserviceable chip board, unsv body and all burnt parts complete, making it to serviceable state, including testing, caliberation & refixing the same complete all as specified and directed by Engr-in-Charge.

S&F in replacement of one time plastic seal having company marked serial number suitable for electrical meter and ceiling fan complete in all respect .

Supply only in replacemnt of FTL Rod 36W, 1.2 mtr length output 3250/3500 lumens 220V AC white incandescent effect complete all as specified and directed by Engineer-in -charge.

Supply only in replacemnt LED Bulb 230V AC 9/10 watt cool day light 6500K complere all as specified and directed by Engineer-in -charge.

M&L in replacement of single core wiring 10 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed

M&L in replacement of single core wiring 6 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed

M& labour for service wire10 sqmm 2core pvc insulated and pvc sheathested1100 volts grade all as specified and directed

M& labour for service wire16 sqmm 2core pvc insulated and pvc sheathested1100 volts grade all as specified and directed

Supply and fixing in replacement modular fan regulator,120 W, two module, electronic step type heavy duty socket type 230 volts complete all as specified and as directed.

Supply and Fixing Modular switch 6 /10 Amps one module 230 volts AC complete all as specified and as directed

Supply and fixing in replacement UNSV PVC ventilation fan motor, UNSV fan body, UNSV louvers for AC 230 Volts 300 mm complete make it to serviceable condition all as specified and directed

Supply and Fixing Modular socket, 6A -2/3 pin combined 2 module, 230 volts AC complete all as specified and as directed

Supply and Fixing Modular switch 16 Amps one module 230 volts AC complete all as specified and as directed

Supply and Fixing Modular socket 6A/16A, 2/3 pin combined, two module 230 volts AC complete all as specified and as directed

BHARAT ENGINEERS

Santokh Singh and Associates

P S BUILDERS

Bharat Builder

M/s AKG Engineers & Contractors

M/S JAI ENGINEERS & CONTRACTORS

M/S B H Contractor