Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹19.8 L+₹1.6 L (9.00%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹21.2 L+₹3.1 L (16.8%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
25 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MCEME SECUNDERABAD
GE MCEME Secunderabad MCEME Campus, Trimulgherry (Post) Secunderabad - 500 015
COMPREHENSIVE REPAIR WORKS TO OFFICERS MD ACCN AND SINGLE OFFICERS ACCN IN ZONE-I AREA UNDER GE MCEME SECUNDERABAD
2022_MES_541548_1
GE/MCEME/TOK/34 OF 22-23
Open Tender
Civil Works
Item Rate
180 days
GE MCEME SECUNDERABAD
Class E Category a(I)
7 documents required · 7 mandatory
₹500
GE MCEME SECUNDERABAD
₹50,000
Yes
30 Sept 2022
28 Jul 2022
27 Aug 2022
28 Jul 2022
25 Aug 2022
12 Aug 2022
Amount
S&F in repairs low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches, Bore of pipes in 40mm, complete all as specified and directed by Engineer-in-Charge.
M&L for Granite (jet black colour) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed by Engineer-in-Charge.
S&F in repairs vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes, etc complete all as specificed and as per directed by Engineer-in-Charge.
S&F in repairs plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, etc complete all as specifed and directed.
S&F in repairs CP bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15mm, fancy type, etc complete all as specificed and as per directed by Engineer-in-Charge.
S&F in repairs CP tubular towel rail 600mm long 20mm dia 'D' type in repairs complete all as specified and directed by Engineer-in-Charge.
S & F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms), etc complete all as specified and as per directed by Engineer-in-Charge.
S&F in repairs, 10 litre capacity, low level PVC flushing cistern, syphonic action type white colour, with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, etc complete all as specificed and as per directed by Engineer-in-Charge.
S&F in repair 15 mm CP brass concealed stop valve complete all as specified and directed by Engineer-in-Charge.
M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specificed and as per directed by Engineer-in-Charge.
M&L for rendering 5mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specificed and as per directed by Engineer-in-Charge.
M&L rendering 5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6 on external surfaces of of brick work or concrete surfaces even and smooth without using extra cement, including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specificed and as per directed by Engineer-in-Charge.
M&L for preparation newely plasterd surfaces of ceiling and applying of three coats of white wash complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of newly plasted surfaces of walls and applying two coats of oil bound distemper over a coat of putty over a coat of alkali resistant paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of newely plasted surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant paint complete all as specified and directed by Engineer-in-Charge.
S&F in repair MS 100mm long butt hinges medium weight, cold rolled Including Welding to steel frame complete all as specifeid and directed.
S&F in repairs 18mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination & other side balancing white laminationixed with beeding as in pelmet box, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs for stainless steel handles, cast type, polished bright, Size of handle in 75mm, etc complete all as spd and directed.
S&F in repairs for Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in 100mm, etc complete all as spd and directed.
S&F in repair for, Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, etc complete all as specifed and directed.
Dismantling plain or corrugated steel sheeting, AC Sheets any guage, thickness including Nainital or similar pattern roof covering/wall cladding complete all as specified and directed. (Note : height of the bldg truss is upto 8 mtr)
Dismantling Single layer Mangalore pattern or similar tiles in roofing etc complete all as spd and directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheets 0.50mm TCT any colour having tensile strength of 550 Mpa as in roof covering/wall cladding to walls, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. Note : Ht of the bldg is upto 7 mtrs
S&F 0.50mm TCT pre painted galvalume sheet aluminium zinc coating GI based plain sheet sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating by manufactureres instruction or directed by Engr-in-Charge
M&L for cement concrete type B-0, 1:2:4 (12.5 graded stone agg) as in fixing of groove cutting/hold fast/coping .
Dismantling of steel work of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.
S&F Rolled mild steel in joist, channel angle or tee section, flat iron fixed independently quality conforming to Fe 410W (Gde-E 250, quality 'A')complete all as specified and directed by Engineer-in-Charge.
M&L for applying two coat of synthetic enamel paint on new steel surfaces over a coat of red oxide primer of any desciption, over 10cm in width or girth, not other wise described including preparation of surface etc complete all as specified and directed by Engineer-in-Charge.
Demolition of old brick work of any description andy in any position not othterwise specifically provided for complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with fly ash, modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement including taking down cement plaster of any description complete all as specificed and as per directed by Engineer-in-Charge.
M&L rendering 5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6 on external surfaces of of brick work or concrete surfaces even and smooth without using extra cement, complete all as specificed and as per directed by Engineer-in-Charge.
Supplied only liquid water proofing compound etc complete all as spd and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.
S&F anodised aluminium snap grid of 605x605mm frame work for ceiling including Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer-in-Charge.
M & L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge.
Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:2:4 25mm thick, type B0 (12.5mm graded agg) as as floor finishes complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm thick screed bed or bedding layer of cement mortar 1:6 laying floor finishes complete all as specified and directed by Engineer-in-Charge.
M&L for vertrified ceramic tiles single charged approved shade of any type of colour and pattern 8 to 10mm thick square/rectangular polished area of each tiles not exc.0.36 sqm in floors, etc set and jointed in neat cement slurry and pointed in white or coloured to match complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 450x300x7mm thick, vertical surfaces such as dados, incl 10mm thick rendering in CM 1:4 to receive tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames not exc 1.5 sqm each(without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames exc 1.50 not exc 4.00 sqm each(without taking off shutters from the frames)
Taking down, Shutters of any description exc 1sq. M but n.exc 2 Sqm each, etc complete all as spd and directed.
S&F pressed steel door frame 125 x 60mm with one or more rebats including fixing lugs, hinges, lock strike plate etc complete all as specified and directed
S&F pressed steel door frame 105 x 60mm with one or more rebats including fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engineer-in-Charge.
S & F 2nd class hardwood,Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints,etc complete all as spd and directed.
M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing complete all as specified and directed by Engineer-in-Charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer-in-Charge.
M&Lfor prepration of new wooden surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of pink primer complete all a specified and directed.
M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercials type on both sides complete all a specified and directed.
S&F 2nd class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, gauze etc and fitted to chowkats complete all as specified and as directed by Engineer -in-Charge.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperature 1.40mm & fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
S&F for Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinges in 100mm, etc complete all as spd and directed.
S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.
S&F aluminium handles 150mm long fabricated type anodised complete all as specified and directed by Engineer-in-Charge.
Taking down eaves, gutters and rain water pipes including all fittings any size and pattern complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) 100/110mm bore single socketed pipes in any length with rubber ring joints fixed to wall with pvc clamps complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) bend/shoe for 100/110mm dia complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) 75mm dia single socketed pipe including jointing with solvent cement complete all as specified and as directed.
S&F in repairs PVC (SWR) gully grap 125/110mm setting and jointing with solvent cement and preparation of trap hole complete all as directed by Engr-in-Charge
S&F in repairs aluminium extruded section body door closer Hydraulically regulated designed No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-Charge. j
S&F 1000 Ltr capacity of rotational moulded polythylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.
S&F 500 Ltr capacity of rotational moulded polythylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part- I complete all as specified and directed by Engineer-in-Charge.
Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes. With bleaching powder exc 500 ltr and n.exc 1000 ltr complete all as specified and directed by Engineer-in-Charge.
Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes. With bleaching powder exc 250 ltr and n.exc 500 ltr complete all as specified and directed by Engineer-in-Charge.
S&F in repairs chromium plated fancy type stop cock copper alloy 15mm bore screwed down high presure with crutch or butterfly handle screwed both ends for iron pipes
S&F in repairs 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete, screwed for iron pipe or for brass ferrule of 20mm dia complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 25mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete, screwed for iron pipe or for brass ferrule of 20mm dia complete all as specified and directed by Engineer-in-Charge.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average widthof aperture 1.40mm and fixed with stainless steel wire staples complete all as directed by Engr-in-Charge.
M&L 2nd class hardwood exc 6 & n.exc 13 sqcm plain fillets square, rectangular or triangular insection, clean sawn, secured with nails orbrads complete all as specified and directed
Taking up or down steel tubing & connections, 15 mm dia complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing & connections, 20 mm dia complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing & connections, 25 mm dia complete all as specified and directed by Engineer-in-Charge.
Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings 20mm bore on walls/ceiling or laying in floors including specials (nipple, socket, reducer, union, elbow etc) complete all as specified and directed
Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings 25mm bore on walls/ceiling or laying in floors including specials (nipple, socket, reducer, union, elbow etc) complete all as specified and directed.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 15 mm complete all as specified and directed by Engineer-in-Charge.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 20mm complete all as specified and directed by Engineer-in-Charge.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 25mm complete all as specified and directed by Engineer-in-Charge.
Demolition of old unserviceable cement concrete of any description and in any position not otherwise provided for complete all as specified and directed by Engineer-in-Charge.
M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base etc., complete all as specified and directed by Engineer-in-Charge.
M&L for 50mm thick Sand filling under floors or in foundations including watering and consolidation, etc complete all as specified and directed.
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with gery cement and no pigment, etc complete all as specified and directed by Engineer-in-Charge.
S&F in rep central hole basin mixer with regular spout with popup waste system with 450 mm long braided hoses complete as directed by Engr-in-Charge
S&F in repairs CP brass wall mixture 15mm dia for hot and cold water screwed down for iron pipe and fixed complete all as specified and directed
S&F in rep 8mm thick glass corner, radius not exceeding 300mm dia with SS brackets/rail as approved directed by Engineer-in-Charge complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC Box type mirror cabinet 450x350 mm size (As per Sample) modular type complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Stainless Steel soap dish, any type, fixed to plugs with chromium plated brass screws, etc complete all as specified and as per directed by Engineer-in-Charge.
S&F in rep CP curtain rail / drapery rod 20 mm dia of approved pattern along with decorative SS brackets of approved quality and pattern fixed with screws, etc complete all as specified and as per directed by Engineer-in-Charge.
S&F in rep stainless steel peg set of five hooks as approved complete all as specified and directed by Engineer-in-Charge.
M&L for 6 to 7 mm thick Gypsum board panels 600x600mm with PVC laminated on one side and aluminium foil on another side suitably placed in false ceiling grid made of aluminium GI/MS all as specified and as directed. Note: Aluminium grid will be measured and paid separately
S&F in repair 15 mm CP brass two way angle cock stop valve all as specified and directed by Engineer-in-Charge
S&F in repair MS Box Type Hinges suitable for MS window including Welding, easing to window shutter at height of 4th floor of the bldg. complte all as specifeid and directed.
S&F in repair Vitreous China wash down water closet pan cascade type white/ ivory colour & trap including connection to drain (or out going pipe and to flushing pipe anti shyfonic pipe etc complete all as directed. Make : CERA /Jaguar /Hindware
S&F in repair Vitreous China sensor Type Urinal with suitable connection accessories white/ ivory colour & etc complete all as specified and directed by Engineer-in-Charge. Make : Jaguar, Hindware, Cera
S&F Windows/ventilators (NCL ECO–4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS-513 “D” quality galvanized as per IS-277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. Sections for Frame should be of 72x55mm, Section for Mullion should be of 72x50mm, Section for Shutter Frame should be of 47x20mm, Section for Fixed Glass Bead should be of 12x12mm, and Section for Fly Mesh should be of 40x20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges–1 set, Seccolor Handle & Seccolor Stay and 4mm Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6x12mm MS flat and fixed to window frame with screws complete all as specified and directed by Engineer-in-Charge.
harshraj and co
M/S DIVIJA BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .