Repair and maintenance of decorative poles 23 Junctions installed at various wards of JMC.

60 W LED Decorative Fixture Landscape outdoor Post top luminaire mounted in suspension type having an approximate size of 460mm outer diameter and 635mm height, housing - aluminium with designer steel aesthetic crown, optical grade opal injection moulded/clear polycarbonate diffuser and graphite grey UV resistant colour ,constant current electronic, driver provided with high voltage ,open & short circuit protection and ambient temperature -10C to +40C. Supply 150V- 240V power factor 0.95 ,THD ≤ 20% internal surge protection of 4KV with following specification of light Engine for 60W: 4800 Lumens, CCT 3000K ±500 CCT, CRI 70 and lumen maintenance of L70 at 50000 hours IP 65 connectors,Accessories etc Complete with all repects.(As per existing lights and fixtures)

Supplying installation, testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars /Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status, I/c programming at site complete as required.01 output per phase and suitable for single phase supply. (as per the direction of Engineer Incharge)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Α, 16 ΚΑА, ТРМССВ

Supply of ML 2 AC Contactor ISI Mark Reputed make. (As per direction by Engineer Incharge)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing following rating, double pole, 240 V, Isolator /SPN in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

Repairing of Pole mounted Substation (10 KVA AND 16 KVA) including 3 phase digital meter complete in all respect.

Supply, Installation, Testing & Commissioning of 1.1 grade, 2Cx4 Sqmm Al. Armoured XLPE Sheathed cable including termination (along with lugs)

Supply, Installation, Testing & Commissioning of 1.1 grade, 4Cx4 Sqmm Al. Armoured XLPE Sheathed cable including termination (along with lugs)

Supply, Installation, Testing & Commissioning of 1.1 grade, 4Cx6 Sqmm Al. Armoured XLPE Sheathed cable including termination (along with lugs)

Supply, Installation, Testing & Commissioning of 1.1 grade, 4Cx10 Sqmm Al. Armoured XLPE Sheathed cable including termination (along with lugs)

Supply, Installation, Testing & Commissioning of1.1 grade, 4Cx16 Sqmm Al. Armoured XLPE Sheathed cable including termination (along with lugs)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table

Operation and Maintanance for Two Year