SPECIAL REPAIR TO GOVT MD ACCN BLDG NO PN-88 AT WHITE KNIGHT ENCLAVE AT NAGROTA UNDER GE NAGROTA

Amount

Demolition of cement concrete in ground floor & paving etc not exceeding 15 cm thick below or above ground level (Un-reinforced). Note : All demolished/rubbish material to be thrown away from MoD land.

Dismantling floor, hearth or wall tiling/Terrazzo including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

Taking down plastering on brick or stone wall including racking out joints, hacking for key, scrubbing down with water.

Taking down chowkat with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm each and removing from site (wood or steel) complete all as specified and as directed at site.

All as per srl item No 4 above, but exceeding 1.5 sqm and not exceeding 4 sqm each complete all as specified and as directed at site.

Taking up or down steel tubing and connections 15mm bore including cleaning for refixing or removal to store.

Taking up or down steel tubing and connections 20mm bore including cleaning for refixing or removal to store.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.)

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.)

Dismantling water tank of any capacity (exc 250 ltrs & n exc 500 ltrs capacity)

S&F 500 ltr capacity rotational moulded PVC water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified SSR Part-I Make: Sintex/Rotex double layer or equivalent in approved makes.

Demolition of RCC of any description and in any position.

Demolition of brick work or stone boulder masonary complete all as specified.

Dismantling cast iron work of any description.

M & L for 62 cm wide Udaypur green stone 15 to 18 mm thick (table rubbed and polished) as in cooking platform of size not less than 2 m in length, including cutting for sink over 20 mm thick screed bed in CM 1:4 including roughening of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match with the shade of the stone, complete all as specified and directed by Engineer in charge.

Ditto all as per item No 17 above but 75-100 mm wide stone as on edges of cooking platform.

M&L of Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces and applying a coat of cement slurry @ 03 Kg/Sqm of surface.

M&L of Machine cut kota stone 18-20mm thick in skirting, dado ,riser and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in CM ( 1:4) including taking out of existing dado.

Rounding and grinding of edges of kota stone as on cooking platform, steps etc all as specified and dircted by Engr-in-Charge.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over & including 15 mm thick screed or bedding layer in CM 1:6, complete all as specified.

M&L Glazed ceramic coloured tiles 350 x 250mm x 7 mm/300mmx450mmx 7mm thick as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over & including 10 mm thick screed or bedding layer in CM 1:4 complete all as specified.

M&L for 25mm thick PCC type B-1 using 20mm graded aggregate as in floor and finishing the surface even and fair to receive top layer complete all as specified.

Cutting chases for concealed water tubing (cutting not exc 10 cm girth) and making good in CM 1:3 in brick wall.

S&F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle 15mm bore screwed both ends for iron pipe of for unions and fixed but fancy type chromium plated.

S&F CP concealed stop cock screwed down high pressure with crutch or butterfly handle 15mm bore screwed both ends for iron pipe or for union complete all as specified

S&F CP sink cock screwed down high pressure with crutch or butterfly handle 15mm bore complete all as specified

S&F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle 20mm bore screwed both ends for iron pipe of for unions and fixed.

S&F bib taps CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore complete all as specified.

S&F in repair 15mm pillar tap, chromium plated, screwed down high pressure with and without levelled hot or cold with long screwed shanks and fly nuts screwed for pipe complete all as specified and directed.

S&F Shower rose of chromium plated 125mm dia round shape with or without swivel joints, including fixing to 15mm bore steel pipe or union, complete all as specified and as directed by Engineer-in-Charge.

S&F PVC flush pipe 32 mm of low or high density for low or high level cistern fixed in repairs complete all as specified.

S&F PVC waste pipe of 32mm bore for wash hand basin fixed in repairs.

S&F in repair PVC valves less syphonic action type low level flushing cistern 10 ltr capacity with inlet ball valve, brackets all as specified.

S&F wash hand basin, vitreous china, flat back, white of size 550x400mm with CP pillar tap and waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, fixed as in repair complete all as specified and directed.

Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to trap and flush pipe 32mm dia for low level flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge. Note :- (i) The WC shall be ISI marked 1st quality (ii) Unit rate quoted against the above item also includes for provision of lead joint between CI trap and outlet pipe. (iii) The disturbed surface of floor shall also be made good as per existing specifications without any extra cost to Govt.

S&F peg set of six made of mild steel powder coated design as approved by Engr-in-Charge.

S & F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube 19 x 19 mm in opening as specified in drgand as diredted by Engr in Charge.

Mild steel framed works as in doors frame single or double rebated of angle or other section with guesset plates rails braces rail etc exclusive of steel sheeting or other covering hanging also fastening and fixing complete.

S&F pressed steel frame of size 105x60mm for door with one rebate including necessary fixing lugs,hings,lock strike plate complete all as specified

S&F pressed steel frame of size 125x60mm for door with two rebate including necessary fixing lugs,hings,lock strike plate complete all as specified

S&F factory made 2nd class hard wood plain framed factory made panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kin seasoned and chemically pressure treated 35mm thick.

S&F PVC flush door solid panel fancy type both side with teak wood finish 30mm thick consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontly inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelaminated PVC sheet using solvent cement on both the sides of the panel etc. complete as per direction of Engineer-in-Charge, maufacturer's specification and drawing.

S & F Box type Steel windows/vent with double shutters (inside for wiremesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing. Note:- Steel window/vent shall be conforming to relevant IS.

S&F 2nd class hardwood 35mm thick glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with out and mittered beads for member of shutters as specified in SSR Part-I section 8 clause 802 (a) factory made shutters.

S&F 25mm thick solid core construction, with block board core and both faces covered with decorative face veneer with liping frame with 2nd class softwood as in shelves of cupboard & cupboard shutter complete all as specified and directed by Engr-in-Charge.

S&F 2nd class hardwood 35mm thick glazed and skelton shutters(half panelled and half skelton) open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with out and mittered beads for member of shutters as specified in SSR Part-I section 8 clause 802 (a) factory made shutters.

M&L PCC 1:3:6 as in back filling of chowkhats complete al as specified.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples to all door/window/vent shutters all as directed.

S&F aluminium anodized barrel tower bolt of extruded section 150mm long.

S&F aluminium alloy, anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast as or extruded sections and fixing bolt and sliding bolt of extruded section 250mm long.

S&F butt hinges, medium weight cold rolled mild steel 100mm long.

S&F aluminium handles 125mm cast type anodized.

S&F mild steel 300mm long helical door springs including roller and roller plate complete and necessary welding required all as specified.

S & F Hasp and staple aluminum anodized 100 mm long with mild steel hinge pin including bolt to hinge plate.

S&F drapery rods of 25mm dia plastic coated fixed on wall including funnels and brackets.

S&F mild steel chromium plated curtain rails 15mm dia with fixing brackets as in cup board.

M&L 15mm thick cement plaster on other than fair faces of brick work CM 1:6 finished even and smooth without using extra cement.

M&L 15mm thick cement plaster on fair faces of brick work CM 1:4 finished even and smooth without using extra cement all as pecified using water proofing compound. Note:- The rate of WPC shall be deemed to be included in the quoted rate.

M&L for 10mm thick cement plaster on cement concrete surfaces as in ceiling in CM 1:4 finished even and smooth without using extra cement all as specified .

M&L for preparation of new plastered wall surface and applying two coats of Oil bound distemper over a coat of primer and applying putty on plastered surface.

M&L for preparation of old plastered wall surface and applying two coats of Oil bound distemper.

M&L for preparation of new plastered ceiling surface and applying two coats of white wash.

M&L for preparation of old plastered ceiling surface and applying two coats of white wash

M&L for Preparation of new plastered wall surface and applying two coats of cement base paint complete all as directed.

Ditto all as per item no 67 above but over old decorated surface. .

M&L for two coats of synthetic enamel paint over a coat of primer after the preparation of wooden surfaces exc 10cm width or grith after the preparation of new wooden surfaces.

M&L for two coats of synthetic enamel paint over a coat of primer after the preparation of new steel surfaces over 10cm width or grith.

S&F PVC grating round 140mm size of PTMT (min wt 50gms).

S&F 75mm bore cast iron sand cast pipes soil waste and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors.

Ditto all as per srl item No 72 herein before but fixed to wall.

Ditto all as per srl item No 72 herein before but 100mm bore laid in trenches.

Ditto all as per srl item No 72 herein before but 100mm fixed to wall.

S&F 100mm bore Cl bend, diminishing pieces or tapers (larger bore measured)

Ditto all as per srl item No 76 here in before but 75mm bore.

S&F cast iron floor trap with PVC (PTMT) grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 75mm of out let.

S&F cast iron branch piece single equal or unequal ordinary or inverted with parallel branches of 100mm bore.

S&F cast iron branch piece single equal or unequal ordinary or inverted with parallel branches of 75mm bore.

S&F cast iron branch piece double equal or unequal ordinary or inverted with parallel branches of 100mm bore.

S&F cast iron branch piece double equal or unequal ordinary or inverted with parallel branches of 75mm bore.

S&F cast iron bend (any radius) with ducks foot or heel rest of 100mm bore.

S&F cast iron bend (any radius)with ducks foot or heel rest of 75mm bore.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolt and nuts securing ends of stays to wall or roof of 75mm bore.

S&F kitchen sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified.

S&F Stainless steel plate rack made out of 0.63mm thick sheet wall mounted type with 5/6 partition of size 60 cms x 90 cms x 25 cm fixed on wooden gutties complete all as directed by Engr-in-Charge. Make - Blue Star (KPR-312) or equivalent in Nirali/neelkanth.

S&F for mild steel framed work such as grill, water cooler stand, railing and grating with ends of bars shouldered and/or riveted guard bar conforming to Fe 410-O or Fe 310-O all as specified.

M&L for PCC 1:2:4 type B-0 as in benching coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rail etc.

M&L 10mm plaster on concrete surfaces in CM 1:3 on facia/ chajja/parapet etc.

M&L Mild steel TMT bars 8mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L RCC type B-1, 1:2:4 (using 20mm aggregate) Slabs supported on walls, beams & columns in floors, roofs, landings, balconies, canopies, deck slabs & in shelves complete all as specified.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in CM 1:4 complete all as specified.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in CM 1:4 in half brick thick wall complete all as specified.

Dismantling brick tiles or terracing tile, single layer on roof including cleaning the roof surface and filling the cracks with silicon compound if observed on roof complete all as specified.

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 50mm thick as in padding finished even and smooth witout using extra cement

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm complete all as specified.

M&L for Laying APP (atatic polypropylene) modified membrane 3mm thick and weighing not less than 3 kg/sqm with 160 GSM/sqm, non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap, the membrane has to be laid with LPG torch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane fixing of broken glazed tiles and grouting with mixture of white cement and marble powderover roof complete all as specified and directed

Taking down rain water pipes (any types) including all fittings of any size and pattern.

S&F PVC rain water pipe 110mm bore, single socketed in any length wiht rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts, bolts etc complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 110mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door.

Supply and fixing towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed.

Supply and fixing towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repair complete all as specified and directed.

M&L Nahani traps 100mm dia with grating including jointing to waste pipe with run lead jointed and setting/fixed in cement concrete type B-1 1:2:4 fixed in repair complete all as specified and directed.

Material and labour for 50mm thick plain cement concrete type C-1 1:3:6(Using 40mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Demolition of un-reinforced cement concrete exc 15cm thick on any description and in any position (in sunken portion) not other wise specially provided for and removing all demolished material/debris exc 250m but n.exc 500m from the sie and depositing where directed complete all as specified and directed.

M&L for PCC 1:5:10 type E2 using 40mm graded crushed stone aggregates as in sunken floor filling and mass concrete complete all as specified and directed.

M&L for water proofing treatment to sunken portion by applying a layer of blown bitumen 85/25 @ 1.7Kg/Sqm including cleaning surfaces complete all as specified and directed.

M & L for chequered cement concrete tiles 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 20 mm thick screed bed in CM 1:4, over 75 mm thick PCC 1:2;4 type B2 all as directed by EIC .

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation, man holes etc n.exc 10 Sqm on plan n.exc 1.5m in depth & getting out soft/loose soil.

M&L for Concrete bed PCC 1:4:8 to drain pipes including packing under, and haunching against the side of pipes after they are laid and tested all as specified.

M&L for salt glazed stone were drainpipes grade ‘A’ ISI marked laid to slope in trenches, jointed in CM (1:1) and tested complete of size 150mm dia.

Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point.

Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose, lamp holder, regulators, sockets, light fittings etc. and keeping in safe custody for taking credit complete all as specified and as directed by Engr-in-Charge

Taking down ceiling fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, Oiling & Greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and directed by Engr-In-Charge.

Taking down unserviceable MCB DB SPN with MCB's of any make / capacity as directed by Engr-in-Charge.

Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

Taking down unserviceable meter fixing board of any size and material, complete all as specified and directed by Engr-In-Charge.

Taking down unserviceable sub main wiring including wooden batten/PVC conduit of any size, complete, all as specified and directed by Engr-In-Charge.

Taking down existing energy meters, keeping aside safely & refixing the same in its original position after making functional & after completion of point wiring/sub main wiring, complete all as specified and directed by Engr-In-Charge. Note:- Small items required for fixing the electric energy meter at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.

Taking down existing electric water heater, keeping aside safely & refixing the same to its original position after servicing of the whole geyser/making functional and after completion of wiring work, complete, all as specified and directed by Engr-In-Charge. Note: If any part found unserviceable during the refixing of water heater at site, the same shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following :-

(a) One light point controlled by one switch 5 Amp

(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp

(c) One socket out let 5Amp controlled by one switch on same board

(d) One socket out let 5 Amp controlled by one switch on independent board

(e) One bell point 5 Amp controlled by one bell push on independent board

(f) One light point controlled by two, 2way switches 5 Amp

All as per item No 126 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independent board.

S&F switch piano flush type 5 Amps single pole one way complete,

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete.

S&F switch socket combination 2 in 1, 5 pin, 5 /15 Amps flush type complete.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated body complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.

S&F bell push piano type 5 Amps complete.

S&F switch piano flush type 5 Amps 2 way complete.

S&F electric bell ding dong 230 volt AC complete,

M&L Integrel sleek extruded batten aluminium /CRCA channel fitting with LED 18 watt complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V 50 Hz. Cat part no.112181 BLRB-DB 118 ( for batten fitting) of Bajaj & Cat part no. BLRB18W CW (for LED 18 watt ) of Bajaj or equivalent in Havells / CG.

S&F baton integrated LED channel of 5W, 230V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less then 0.9 as per Cat Part No. BCLSB 05 WH of Bajaj or techno commercial equivalent in Phillips/Wipro/Havells

M&L LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 9 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz .

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F for LED bulb 7 watt complete all as specified and directed. Make Bajaj /Havells or equivalent in approved makes.

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete all as specified and as directed by Engineer in charge.

S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link TPN 4 way suitable for MCCB as incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar complete, fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site. Makes : Legrand or equivalent in Schneider / Siemens / IndoAsian

S&F MCB DP 63 Amps 10 KA 230 volts "C" series complete

S&F MCB single pole 6 to 30 Amps 10 KA 230 volts "C" series complete

S&F MCB single pole 40 Amps 10 KA 230 volts "C" series complete

S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6.0 sq mm as earth continuity conductor connected to commen earth and earth dolly complete .

M&L for sheet steel box fabricated out of 2 mm thick CRCA sheet powder coated of size 60x60x25 cm duly compartmentalized suitable to accommodate 4 Nos Energy Meter independently. each compartment shall be provided with suitable door and 2 Nos fancy lock, complete, all as specified and directed by Engr-In-Charge.

M&L for earthing complete for building with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete.

Note:- Schedule of credit Rs. 25,028.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

Hare krishna engineering const.

BHARTI CONSTRUCTIONS

M/S MANISHA BUILDERS