| 1 | Comm Audit Section Repair Work | Pdg and installation of customised running cantilever wooden false ceiling.They are very easy to install wood ceilings�usually consist of wood panels which are then joined together with standard commercial false ceiling systems (T-15 and T-24 profiles). Marking out the desired height of your ceiling design from the floor along the walls and add wooden struts to support the structure. Then installing the wooden panels and using choice of paints and finishes to complete the look.as it provides protection the room from cold and overheating, it is environmentally safe and durable. | 375 | Sq FT | SupdtRandM | 15 |
| 2 | Comm Audit Section Repair Work | Providing and fabricating of wooden customised decorative cornice.made out of wooden structure. The face of the cornice can be made from plywood (1/2 in thickness). size 1 x 4 or 1 x 6 lumber for the top piece (dust board), and side pieces . Cornice boards mounted 4 inches above the top . The height of the cornice is1/5 the total height measurement . fixing running strip lights to the cornice with all complete electrical wiring work. | 32 | Sq FT | SupdtRandM | 15 |
| 3 | Comm Audit Section Repair Work | Existing worn out wiring and damaged cable and wiring discarding carefully. Pdg and testing, commissioning, installation of electrical power / light point 5/15 AMP circuit of 2x2.5sqmm including modular switches, socket, internal box with face plate 1.5 SQMM wire green earthing wire in the PVC conduit .all complete with electrical wiring work as per requirement | 1 | Piece | SupdtRandM | 15 |
| 4 | Comm Audit Section Repair Work | Pdg and fixing customized strip running light with concealed LED light. Lights fixing with concealed wiring work with all eletrical cables, including modular switches and socket etc. | 1 | Piece | SupdtRandM | 15 |
| 5 | Comm Audit Section Repair Work | Existing door repairing work. Hinges of the door loosen same tighten with screw driver. Door both sides scraping the frame with samd paper smoothly. Fiiling the cracks wherever required. Applying two to three coats of enamel paint to the both sides of the door. Applying nealty without any patches to the door. Removing damaged hardware fittings and fixing new hardware wherever required. | 1 | Piece | SupdtRandM | 15 |
| 6 | Comm Audit Section Repair Work | Pdg and fixing beam covering in decorative form. Made out of plywood structure . Fixing electrical strip lights with concealed wiring work. all complete with melamine polish work. finishing the beam as per design. | 1 | Piece | SupdtRandM | 15 |
| 7 | Comm Audit Section Repair Work | Luster Painting work for wall- Sand papering, cleaning the surface to smooth texture, filling the holes and cracks with putty and sanding them until they are smooth. applying primer and other sealers with lambi patti using necessary tools to full surface in layers, thereafter applying coats of paint finished in approved shade and colour. Roller to be applied on all surface etc. | 954 | Sq Ft | SupdtRandM | 15 |
| 8 | Comm Audit Section Repair Work | Enamel Painting work for ceiling Sand papering, cleaning the surface to smooth texture, filling the holes and cracks with putty and sanding them until they are smooth. applying primer and other sealers with lambi patti using necessary tools to full surface in layers, thereafter applying coats of paint finished in approved shade and colour. Roller to be applied on all surface etc. | 1,682 | Sq FT | SupdtRandM | 15 |
| 9 | Comm Audit Section Repair Work | Providing and supplying customised Wooden Visitor Chairs. Made out of seasoned teak wood. Open frame size � 75mm x 38mm thick and corner brackets with spring Upholstered frame size- 50mm x 25mm thick. Seat size- 430mm W (Back side) X 470mm W (Front side) x 495mm D Having 50mm thick rubber foam on the seat.Back - Upholstered frame thickness 50mm x 25mm in bending (curve) shape. Frame size � 250mmH x 430mmW Having 75mm thick rubber foam on the back. Using of superior quality tapestry . All wooden exposed surfaces smoothing with sand paper and finishing with three coats melamine polish as approved colour shade. All complete. | 4 | Piece | SupdtRandM | 15 |
| 10 | Comm Audit Section Repair Work | Providing and supplying of customised Executive High back chair The seat back cover is to be injection moulded in black copolymer polypropylene. One injection piece mopulded with PU foam. Lumbar adjustable support.The Polyurethane foam is to be moulded with 3 thick foam rubber and 12mm thick U foam. Finally finished with Tapestry .The armrests are to be made of black skin Polyurethane with hardness and reinforced with S.S.Steel insert. It is Scratch & weather resistant. 5 Prongs S.S.Steel stand. | 1 | Piece | SupdtRandM | 15 |