Certain sanctioned works of upgradation of electrical panel and wiring at Tibri Mil Stn under GE Gurdaspur.

Amount

Taking down carefully aluminium/ copper point wiring for light, fan, bell, socket of point complete fittings such as switches, ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L in replacement of point wiring PVC insulated and PVC unsheathed multistranded FR copper conductor cable of size 1.5 Sqmm including in concealed PVC conduit fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 Sqmm dia to common earth incl provn of 3mm thick plastic laminated sheet of appropriate size and fixing to existing CI/MS boxes for mounting of accessories like surfaces sockets and regulators complete all as specified and directed. One light/ fan/ bell point controlled by one way switch.

All as per Srl item No 03 above but one 5 pin socket outlet 6 Amps on independent board.

All as per Srl item No 03 above but one 5 pin socket outlet 6 Amps on same board.

All as per Srl item No 03 above but wiring with 2.5 Sqmm copper wire including earth wire 2.5 Sqmm of copper for 16 Amps 3 pin socket outlet complete all as specified and directed by Engineer-in- Charge.

S&F switch piano flush type single pole one way 6 Amps complete all as specified and directed.

S&F socket outlet 3 pin 6 Amps flush type complete all as specified and directed.

S&F switch flush type 16 Amps single pole type one way complete all as specified and directed.

S&F socket lutlet 3 pin 16 Amps flush type complete all as specified and directed.

S&F in replacement surface mounting universal batten housing made of powder coated CRCA sheet fixed on and including 2 Nos PVC square block suitable for upto 1 x 18/20 W LED tube rod single sided in and including taking down old unservicedable fitting complete all as specified and directed.

S&F LED tube light 20W ultra bright LED polycarbonatetube light with very high efficacy suitable for fitting into existing/ new tube light batten fitting all as specified and directed. The contractor will submit the LM-80 and LP-79 report from manufacturer to Engineer-in-Charge before incorporating the items in work.

S&F in replacement fan regulator 5 step 100 watt, 240 volt complete all as specified and directed.

Taking down ceiling fan, sealing cable end, dismentling blades and removing fan and blades and kept in safe custody/store.

Hanging only ceiling fan and connecting up including provision of cable form ceiling rose to connector of fan complete all as specified and directed.

S&F electric bell 230 volts ding dong.

S&F bell push switch single pole one way 5 Amp complete all as specified and directed.

S&F lamp holder PVC body angle type including 9 watt LED bulb glass type complete all as specified and directed.

M&L ceiling rose, surface bakelite 65 x 50mm three terminal complete all as specified and directed.

S&F in repair sheet metal enclosure for DB's when MCB's to be used of 240 volt 8 way with 200 amps rated bus bar SPN double door complete all as specified and directed.

S&F in repair sheet metal enclosure for DB's when MCB's to be used of 240 volt 4 way with 200 amps rated bus bar SPN double door complete all as specified and directed.

S&F in repair MCB single pole 6 amps to 32 amps, C series complete all as specified and directed.

All as per Srl item No 22 above but single pole and neutral 6 amps to 32 amps, C series complete all as specified and directed.

S&F in replacement of distribution board made out of CRCA sheet DB vertical type double door TPN 4 way made of MS sheet fixed on wall including grouting firmly to wall having independent opening for each compartment at front and panel painted with two coats of powder paint over a coat of red oxide primer prewired with copper cable multistranded of suitable ampacity, made by CPRI approved firm, making connections and comprising of followings :- (a) MCCB 100 Amp 4 Pole 16 KA, 50 Hz- 01 No (Incoming) (b) MCB , SPN 40 Amp, 10 KA - 04 Nos (Outgoing). (c) Bus bar chamber with aluminium bus bar of 200 amps rating 04 Nos all along the length of the panel -01 Set. (d) Cable glands/ lugs and rubber bushes etc for incoming and outgoing curcuits.

S&F in replacement of GI pipe bracket made out of GI pipe light grade 32/40mm dia and bend to shape 1.5 mtr long MS flat iron of size 40x4mm thick with nuts and bolt , washers complete including dismentling the existing GI pipe bracket and drilling of holes for nuts and bolts etc complete all as specified and directed.

S&F new generation energy saving 45 watt LED street light IP-66, luminiaries withlong life versatile pressure die-cast aluminium, housing with high power LED as lighting source and lens embeded PC cover road way luminaire complete all accessories, connecting up with three coare flexible copper conductor cable complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common saft filling in alternate layers and electrode connection by using earth lead GI wire 4mm dia ( 8 SWG) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron light grade pipe 15mm bore in wall/floor/and GI Pipe 20mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 5 of SSR 2009 ( Part-I).

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and directed.

Excavation in trenches in soft /loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for pole, stay, cable, pipe etc getting out complete all as specified and directed.

Returning filling including spreading , leveling, watering and well ramming in layers each n.exc 25 cm thick in soft loose soil complete all as specified and directed.

Removing excavation material n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and lay brick common burnt sub class "B" old size and for protection of cable laid in trenches for under ground cable all as specified.

M & L sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified and directed.

M&L for cable protection GI tubing light grade fixed long the pole/under road/along the wall of size 50mm bore with necessary clamps complete all as specified and directed.

M&L for sub main wiring two runs of 4 Sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for netrual) of grade 1100 volts FR cable in and including electrical grade PVC conduit of desired colour not less than 1.2mm thick and 25mm wide and 4 Sqmm copper condutor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and directed and including taking down old unserviceble one.

M&L for sub main wiring two runs of 6 Sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for netrual) of grade 1100 volts FR cable in and including electrical grade PVC conduit of desired colour not less than 1.2mm thick and 25mm wide and 6 Sqmm copper condutor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and directed and including taking down old unserviceble one.

M&L for sub main wiring two runs of 10 Sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for netrual) of grade 1100 volts FR cable in and including electrical grade PVC conduit of desired colour not less than 1.2mm thick and 25mm wide and 10 Sqmm copper condutor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and directed and including taking down old unserviceble one.

Harbhajan electric co

P S BUILDERS

Sharma Electrical and Engineering Works

M/S Vijay Punj Constructions