Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.0 LAdmitted-Finance INDEX NO E 29 CWE JRC 352 3 GURU NANAK PURA EAST JALANDHAR CITY PIN 144001 | JALANDHAR CITY | JALANDHAR | PUNJAB | 144001 | ₹34.0 L | L1 | Admitted-Finance |
| 2 | L2₹39.6 L+₹5.6 L (16.6%)Admitted-Finance | ₹39.6 L+₹5.6 L (16.6%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Sandhu Engineering co L2 | Northern cable fault locatoers L1 |
|---|---|---|---|---|---|
| 1.00M&L for painting of GI/MS pipe of undermentioned size dia incl connected fittings and valves in the pipe line for water Treatment Plant / Sewage treatment plant or any other loc by using mechnical means/ spray gun complete incl scrapping of old paint with emery paper, preparing old surface for painting, applying two coats of synthetic enamel paint of colour code as per IS 2379 incl making arrow at spacing of 5 RM of size and colour as approved by Engr-in-charge complete all as specified & directed by Engineer-in-charge. | |||||
| 1.01 | (a) 50 mm bore dia | 70 | RM | 10 ₹700 Lowest | 50 ₹3,500 |
| 1.02 | (b) 80 mm bore dia | 70 | RM | 20 ₹1,400 Lowest | 50 ₹3,500 |
| 1.03 | (c) 100 mm bore dia | 45 | RM | 30 ₹1,350 Lowest | 70 ₹3,150 |
| 1.04 | (d) 150 mm bore dia | 20 | RM | 40 ₹800 Lowest | 70 ₹1,400 |
| 1.05 | (e) 200mm bore dia | 25 | RM | 50 ₹1,250 Lowest | 70 ₹1,750 |
| 2.00 | M&L for painting of Sewage Treatment Plant motor/pumps/ blowers as under mentioned of any sizes incl scraping of old paint with emery paper, preparing old surface for painting, applying two coats of synthetic enamel paint by using syray gun approved by Engineer in Charge complete all as specified & directed by Engineer-in-charge.
(a) Air blower with motor-02 Nos
(b) sludge pump - 02 Nos
(c) Filter press pump with motor -02 Nos
(d) filter pump-02 Nos
(e) press filter-01 Nos
(f) Irrigation pump- 02 Nos | 1 | Each Job | 7,000 ₹7,000 | 6,500 ₹6,500 Lowest |
| 3.00 | S&F joint,channel,angle,or tee sections fixed independently with welding,without connecting plates,etc,(cut to ordinary length i.e within 20mm of the length indicated) of Fe-410W (GdE-250) quality B against worn out channel ,angle iron etc complete all as specified and directed by Engr-in -charge | 50 | Kg | 150 ₹7,500 | 110 ₹5,500 Lowest |
| 4.00 | Supply only impeller as per existing of horizontal split casing type centrifugal pump of capacity upto 50 HP. | 3 | Each | 14,000 ₹42,000 | 650 ₹1,950 Lowest |
| 5.00 | Ditto all as per ser item No. 4 above, but pump shaft as per existing. | 3 | Each | 2,500 ₹7,500 | 650 ₹1,950 Lowest |
Tender Value
₹42.6 L
EMD Value
₹85,120
Closing Date
30 Jul 2026, 6:00 pmClosed
Garrison Engineer (East) JRC
Garrison Engineer (East) JRC
REPAIR MAINT OF CERTAIN EXTERNAL SERVICES, WATER SUPPLY SERVICES AND OTHER EXTERNAL E/M AND MISC E/M SERVICES FOR J 1 and J 2 LOC UNDER GE (EAST) JALANDHAR CANTT
2026_MES_764287_2
GE/JULL/ET-80/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
273 days
Garrison Engineer (East) JRC
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) JRC
₹85,120
Yes
13 Aug 2026
9 Jul 2026
1 Aug 2026
9 Jul 2026
30 Jul 2026
16 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1M&L for painting of GI/MS pipe of undermentioned size dia incl connected fittings and valves in the pipe line for water Treatment Plant / Sewage treatment plant or any other loc by using mechnical means/ spray gun complete incl scrapping of old paint with emery paper, preparing old surface for painting, applying two coats of synthetic enamel paint of colour code as per IS 2379 incl making arrow at spacing of 5 RM of size and colour as approved by Engr-in-charge complete all as specified & directed by Engineer-in-charge. | |||||
| 1.01 | (a) 50 mm bore dia | 70 | RM | - | - |
| 1.02 | (b) 80 mm bore dia | 70 | RM | - | - |
| 1.03 | (c) 100 mm bore dia | 45 | RM | - | - |
| 1.04 | (d) 150 mm bore dia | 20 | RM | - | - |
| 1.05 | (e) 200mm bore dia | 25 | RM | - | - |
| 2 | M&L for painting of Sewage Treatment Plant motor/pumps/ blowers as under mentioned of any sizes incl scraping of old paint with emery paper, preparing old surface for painting, applying two coats of synthetic enamel paint by using syray gun approved by Engineer in Charge complete all as specified & directed by Engineer-in-charge.
(a) Air blower with motor-02 Nos
(b) sludge pump - 02 Nos
(c) Filter press pump with motor -02 Nos
(d) filter pump-02 Nos
(e) press filter-01 Nos
(f) Irrigation pump- 02 Nos | 1 | Each Job | - | - |
| 3 | S&F joint,channel,angle,or tee sections fixed independently with welding,without connecting plates,etc,(cut to ordinary length i.e within 20mm of the length indicated) of Fe-410W (GdE-250) quality B against worn out channel ,angle iron etc complete all as specified and directed by Engr-in -charge | 50 | Kg | - | - |
| 4 | Supply only impeller as per existing of horizontal split casing type centrifugal pump of capacity upto 50 HP. | 3 | Each | - | - |
| 5 | Ditto all as per ser item No. 4 above, but pump shaft as per existing. | 3 | Each | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
Tender80.pdf
Tender Documents • 1.15 MB
BOQ_870729.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .