Repair of WTA Repair of Spout Chamber along with Material Procurement and Internal wiring at Metal MAJOR RLI Scheme at Mouza- Dahapal under Binpur-I Block in the district of Jhargram under Jhargram-I (A-M) SUB-DIV under NON-PLAN 2025 - 2026.

Estimate for Reapairing of WTA & Painting of PH along with material Procurement at Metal Major RLI Scheme under Binpur-I Block nder Jhargram - I (A-M) Sub - Division within Midnapore (A-M) Division under Non-Plan Programme 2025 - 2026. ( Please see the details in WTA)

Estimate for Internal Electrical Wiring of Pump House at at Metal Major RLI Scheme under Binpur-I Block nder Jhargram - I (A-M) Sub - Division within Midnapore (A-M) Division under Non-Plan Programme 2025 - 2026. ( Please see the details in IW)

Please Enable Macros to View BoQ information

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Estimate for Reapairing of WTA & Painting of PH along with material Procurement at Metal Major RLI Scheme under Binpur-I Block nder Jhargram - I (A-M) Sub - Division within Midnapore (A-M) Division under Non-Plan Programme 2025 - 2026.

White washing including cleaning and smoothening surface thoroughly (5 parts of stone lime and 1 part of shell lime should be used in finishing coat) all floor.

Colour washing with any sheds with stainer as required including clearing and smoothening surface throughly. i) External surface (ground floor) b) One coat of colour wash other than yellow/pink

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. Two coats (super gloss hi- gloss except white)

Priming one coat on steel or other metal surface with synthetic enamel / oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Earth work in exavation of field trenches as per designed section &alignment for laying of pipe lines (PVC,RCC,ACP etc)upto a depth of 1500 mm in all sorts of soils including removing ,spreading or stracking extra earth as directrd. The item includesnecessary trimming of side trenches levelling, dressing and ramming the bottom as required complete

Repair of puncture/holes of any size in existing PVC. Pipeline of HDTW/MDTW/RLI by placing half round PVC. Pipe section of required size to cover the holesl puncture having adequate bearing on all sides and joining the half round section with solvent cement after roughening the surface with wire brush, emery paper to make the joint leak proof as per direction of Engineer-in Charge (cost inclusive of supplying solvent cement at site and transportation of required length of PVC.Pipe to be issued departmentlly, for cutting half round section, from Sub-Divisional Stores to site) 140 mm dia

200 mm dia

300 mm dia

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (Mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement , if any, in ground floor as per relevant IS codes.(a) Pakur vareity .

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Brick work with Ist class brick in cement mortar (1 : 6) . (a) In foundation and plinth.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar c) 15 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.

Labour charges for fitting, fixing 150 mm. Dia. Alfa-Alfa valve with 140 mm. dia.P.V.C. pipe with the help of flanged P.V.C. tail-piece by joining the P.V.C.End of Tail-piece and riser pipe with coupler and flanged end of Tail-piece and Alfa-Alfa valve with rubber insertion, nuts and bolts etc. complete.

Supplying, fitting and fixing including transportation of sign board for identifing the exact location of Major RLI scheme (one at road side and other at site) the board will be made 3 mm thick MS plate of size 300 mm × 600 mm and fitted and fixed on 50 mm GI Pipe of IS 1239/90 (part-1) including cutting, welding and writting of both sides of Sign board. Base - Yellow, and ward Red. Both bottom end of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soiling. This will include one materials and labour complete as per drawing and direction of EIC.

b) Testing of pipe line system against leakages by filling the distribution chamber with water and supplying water through the entirepipe line net work for at least 4 (four) hour by running the departmental Diesel Engine pumping set, including supplying necessary fuels & lubricants and hiring and transporting tools and plants all complete as per direction of Engineer-inCharge. i) For Major R.L.I.

Total Rs.

Extra Transportation 4% except Earth Work

Sub-Total Rs.

Add GST @ 18%

Sub-Total Rs.

Labour welfare Cess @1%

Total Rs. (A)

140X140X140 mm dia P.V.C. Equal Tee with free solvent cement. ISI marked IS-10124.

160 mm. dia ( IS. No 10124/88 Part- 6 with latest amendment) F.T.P. ISI marked IS-10124.

160 X 140 mm dia.P.V.C. Reducer (Class-II) with free solvent cement. ISI marked IS-10124.

140 mm. dia 90 degree(IS. No. 10124/ 88 Part- 8 with latest amendment) bend

C.I Alfa Alfa valve 150 mm dia C-type with GI TOP COVER PLATE asper drawing and specification.

Foot Valve 150 mm.dia commercial (Flanged type) confirming IS:4038/1986 with latest ammendment

Foot valve Lather washer 150mm.dia (asper sample)

150 mm.dia Rubber Insertion (Table -17) (as per sample)

150 mm dia ISI marked P.V.C.Flexible Hose pipe ISI marked IS 15265(CIPET TESTED)

16X80 NUT & BOLT (GI)

16X65 NUT & BOLT (GI)

C.I Non return valve flanged end and swing type side bypass arrangement conforming to IS15312(Part-I/2004)with latest arrangement.

Sub Total Rs.

Labour welfare Cess @1%

Total Rs. (B)

Grand Total Rs. (A+B)

Say Rs

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Estimate for Internal Electrical Wiring of Pump House at at Metal Major RLI Scheme under Binpur-I Block nder Jhargram - I (A-M) Sub - Division within Midnapore (A-M) Division under Non-Plan Programme 2025 - 2026.

Supplying , fitting and fixing of wooden panel board of size 6' X 4' X 1" fitted with 1" X 1.5" wooden frame with 6 nos. of necessary nut & bots for mounting on the wall of pump house.

Supplying and fixing Sheet steel Main Switches on flat iron frame on wall, 15/16 A, 240V DP with fuse on L&N.

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) including necessary PVC clips, fittings etc. c) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] b) Average run 6 mtr

Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] a) On Board

Supply & Fixing angular batten holder(Anchor) on 75mm dia PVC round block/round bakelite on wall/ceilling.

Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8 watt CFL lamp complete set.

Fixing only 200A, 415V, TPN sheet steel Main Switch (Rewirable type) on flat iron frame/Angle iron frame on wall.

Fixing only MS sheet metal 200 Amps, 4 bars busbar Chamber on angle iron frame on wall.

Fixing only 63 A, 415V TPN Sheet Steel Main Switch (Rewirwable type)/ Change over on Angle Iron Frame on wall

Fixing only 20 HP Star-Delta starters for 20 HP motor on angle iron frame on wall

Laying of cables upto 3/4 core 25 sqmm on wall/surface incl. S&F MS saddles with earthing attachment in 10 SWG GI(Hot Dip) wire, making etc. as necessary mending good damages and painting. i) 16 sqmm Copper Cable (from meter to 200A main Switch and 200 A main Switch to Busbar Chamber)

ii)10 sqmm Copper Cable (from Starter to motor)

Earthing with 50 mm (2") dia Galvanized iron pipe 3.64 mm thick X 3.04 mtr.(10ft) long and 1X4 SWG G.I.(Hot Dip) Wire (4 mtr. Long ) 13 mm (1/2") dia X80 mm (3") long G.I. Bolts, double nuts and double washer including S&F 15 mm dia G.I. Pipe protection (1 mtr) long to be fitted with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.56 mtr. (12") below the ground level and restoring the surface duly rammed for Soft/Morrum soil by ISI-Medium G.I. Pipe

Supplying and fixing earth bar of galvanized M.S. Flat 25 mm × 6 mm on wall having clearance of 6 mm. from wall including providing drilled holes (on busbar) about 3 cm. apart complete with G.I. bolts, nuts, washers etc. as required for tapping.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. i) No 10 SWG (Earth Busbar to Every Equipment)

Supply & Fixing EI danger board on wall 20 cm x 30 cm (8"x12") in two distinguishing position in the door of pump house (outside) and at the palce of panel board

Suppling fitting & fixing of shock treatment chart (Bengali) in a wooden frame with brass.

Installation of Diesel Engine Pumping set of any make / brandand for RLI scheme on pump foundation over SAL sleeper (to be supplied departmentally) by fixing nuts and bolts and making connection of suction hose and foot valve with necessary fittings at the inlet end of the water pump and fitting fixing of 90° M S priming bend, sluice valve and delivery hose with all necessary fittings at the delivery end of the water pump, duly connected with the pipe line, maintaining proper alignment and level including cutting holes on the wall of the pump house where necessary, mending good damages after completion of the works as per direction of Engineer-incharge. (Pump set and all accessories will be supplied departmentally).

Total Rs.

Add GST @ 18%

Sub-Total Rs.

Labour welfare Cess @1%

Grand Total Rs.

Say Rs