Construction of two additional classrooms, along with a boundary wall, at the Upgraded Secondary School in Sanahpur Panchayat, Singhwara Block (Recommended under the Discretionary Fund of the Honorable Member of the Bihar Legislative Assembly, Shri Jivesh Kumar Jale Assembly Constituency).

Group No. BILL OF QUANTITY Name of Work: दरभंगा जिला के सिंघवारा प्रखंड अंतर्गत पंचायत सनह्पुर में उत्क्रमित माध्यमिक विद्यालय सनह्पुर में दो अतिरिक्त वर्ग कक्ष का निर्माण कार्य चहारदिवारी के साथ

B.O.Q. Amount : Rs. 5569245.00

Cost of B.O.Q. : Rs. 10000.00

Earnest Money : Rs. 111400.00

Date of Receipt of Tender: :

Time of Completion : : Months

Sl. No. SOR Code Item of Work Qty Unit Rate Amount

1 20.3A.1 Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth ) 310.98 Cum 245.40 76313.00

2 2.8.1 Earth Work in Excavation in foudnation trenches or drains not exceeding 1.5m in width or 10sq.m on plan including dressing of sides and ramming of bottoms lift uptu 1,5m, including getting cut the excavated soil and disposal of surplus excavatedsoiis as directed, within a lead of 50 m 97.08 M³ 549.80 53375.00

3 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 31.86 M³ 177.00 5639.00

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 70.80 M³ 342.50 24249.00

5 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. 185.25 M² 342.80 63504.00

6 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 9.69 M³ 5314.60 51498.00

7 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttring and reinforcement- All work uptu plinth lavel 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) 53.21 M³ 6116.50 325431.00

8 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand ) 88.56 M³ 5785.70 512382.00

9 6.1.14A+6.3A Brick work with bricks of class designation 100A in :Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V cum 49.51 M³ 6275.90 310720.00

10 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars piers, abutments, posts and struts, etc upto floors five leval excluding cost of centring, finishing and reinforcement:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) 23.91 M³ 7493.10 179127.00

11 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars piers, abutments, posts and struts, etc upto floors five leval excluding cost of centring, finishing and reinforcement:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) 37.01 M³ 7493.10 277308.00

12 5.22 Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

II 5.22.7B Thermo-Mechanically Treated bars TMTC-500 10mm dia 7383.07 Kg 92.50 682934.00

13 5.9.1 Cenetring and shuttering including strutting, proping etc. and removal of form for ( Foundations, footings, bases of columns etc. for mass concrete.) 176.71 M² 272.30 48118.00

14 5.9.5 Centring and shuttering including strutting,propping etc. and removal of form for.Lintels, beams, plinth bams, griders, bressumers and contilevers. 136.29 M² 513.90 70040.00

15 5.9.6 Centring and shuttering including strutting,propping etc. and removal of form for.Columns,Pillars, Piers, Abutments, Posts and Struts 245.28 M² 678.80 166499.00

16 5.9.3 Centring and shuttering including strutting,propping etc. and removal of form for.Suspended floors, roofs, landings, balconies and access platform with water proofply 12 mm thick 150.10 M² 618.20 92792.00

17 5.9.16.1 Centring and shuttering including strutting,propping etc. and removal of form for.Under 20 cms wide 75.00 M² 162.72 12204.00

18 5.9.19 Centring and shuttering including strutting,propping etc. and removal of form for Weather shade,Chajjas, corbels etc. including edges 20.98 M² 708.20 14858.00

19 13.11.4 Cement plaster in coarse sand, 12mm cement plaster 1:6 OUT SIDE 710.78 M² 183.50 130429.00

20 13.12.4 15mm cement plaster on rough side of single or half brick wall of mix. 1:6 ( 1 cement : 6 coarse sand) 942.03 M² 210.90 198674.00

21 13.24.2 6 mm cement plaster to ceiling of mix :1:4(1 cement: 4 coarse sand) 199.48 M² 164.00 32715.00

22 13.13.1+13.36.5 20 mm cement plaster of mix ;1:3 (1 cement: 3 coarse sand)Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 185.16 M² 301.20 55770.00

23 13.11.2+13.26 12 mm cement plaster of mix: Neat cement punning1:4(1 cement :4 coarse sand) 126.28 M² 246.10 31078.00

24 13.78.1+13.80A.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the 868.22 M² 188.45 163616.00

25 13.79.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade 868.22 M² 112.50 97675.00

26 11.41A.2 Providing and laying Vitrified tiles in floor in different sizes {thicknessto be specified by the manufacturer) with water absorption lessthan 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed vitrified floor tiles polished finish of size Size of Tile 600 x 600 mm 121.46 M² 2101.20 255212.00

27 10.7.1 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer. Using flats 30x6 mm for diagonal braces and central cross piece. 23.98 M² 4268.50 102359.00

28 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding 1053.27 kg 176.40 185797.00

29 13.81.3+13.82.1 With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 47.96 M² 154.50 7410.00

30 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 45.91 sqm 109.83 5042.00

31 10.32.2 With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 351.00 M² 136.60 47947.00

31 13.78.1+13.79. Applying one coat of cement primer of approved brand and manufacture on wall surface:Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade 984.07 M² 157.90 155385.00

31 Providing and fixing Signboard 1.00 each 4000.00 4000.00

31 Providing and fixing Inaugration Board 1.00 each 5500.00 5500.00

33 Carriage of Materials

II Stone Chips 105.63 cum 3054.84 322682.00

III Coarse Sand 125.95 cum 3762.48 473884.00

IV Local Sand (3 km) 73.58 cum 342.30 25186.00

IV Cement 0.00 cum 0.00 0.00

34 Extra cost of Material

I Cement 1353.00 bag 6.40 8659.00

35 S.Fee 10% on

I Stone chips 105.63 cum 80.79 8534.00

II Coarse sand 125.95 cum 25.08 3159.00

36 1.3.3 Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 Sq.mm FR PVC insulated copper conductor cable in recessed PVC conduit with modular type switch , modular plate, suitable size GI box etc as required. Group C 10 Point 1146.00 11460.00

37 1.31 Supplying and fixing suitable size GI box with modular plate and cover in recess including providing and fixing modular type 3 pin 5/6 amps socket outlet & 6A switch connection etc. as required. 5 each 414.00 2070.00

38 1.32 Supplying and fixing of suitable size GI box with modular plate and cover in recess including providing and fixing modular 6 pin 15/16 amp socket outlet &15/16 amp modular switch including connection,painting etc as required 6 each 531.00 3186.00

39 1.33 Supplying and fixing 2 pin, 6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 8 each 64.00 512.00

40 1.34 Supplying and fixing Batten/angale holder on the exisiting jucction box/pvc box including connection etc. as required. 20 each 80.00 1600.00

41 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

I 1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 78 Meter 201.00 15678.00

II 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 40 Meter 246.00 9840.00

II 1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire 20 Meter 660.00 13200.00

42 1.15 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required1 X 1.5 sq. mm 90 meter 38.00 3420.00

43 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required.. 1 each 351.00 351.00

44 AR Supplying and fixing Suitable G.I box with modular plate & cover in front of surface or in recess including providing and fixing 4 nos. 3 pin 5/6 amps modular socket outlet & 4 nos 5/6 amps modular switch, connnection etc as required.( Use for computer point) 3 each 1235.00 3705.00

45 2.9 Supplying and fixing following way, horizontal type,three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator 2 each 4184.00 8368.00

46 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6 Amp. To 32 Amp. SP MCB Group-B 240 Volt 8 each 237.00 1896.00

47 2.12.7 50/63 Amps, Tripole pole and neutral 2 each 1859.00 3718.00

48 6.1.6 Supplying and fixing 4'X18 wat[ LED batten with minimum efficacy 100 lm/w in polycarbonate housing and completewith integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. 20 Each 250.00 5000.00

49 5.8.3 Supplying and fixing following types lamp in existing electrical fitting/ fixture etc as required.

50 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. 8 Each 2482.00 19856.00

51 1.25 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc.as required 8 Each 358.00 2864.00 108418.00

Total 5569245.00

JE LAEO WORK DIV-1 DARBHANGA AE LAEO WORK DIV-1 DARBHANGA

EE LAEO WORK DIV-1 DARBHANGA