COMPREHENSIVE B/R NATURE OF REPAIRS INCLUDING TILING, PLASTERING, JOINERY, ROOF TREATMENT, SANITARY FITTING, PERIODICAL SERVICES AND ALLIED B/R WORKS IN AJMER MIL STN UNDER GE NASIRABAD.

Amount

Taking down cement or cement lime plaster on stone or bricks wall etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.

M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 10mm thick in cement mortar 1:4 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing complound, finished even & smooth without using extra cement complete all as specified. Note: WPC shall be measured & paid supply only separately .

Supply only water proofing compound, ISI marked.

M & L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash, complete as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper all as over a coat of chalk white complete all as specified and directed

M & L for preparation new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer, complete all as specified and directed.

M&L for preparation old decorated plastered or unplastered surfaces and providing one coat of white wash on wall including cornices complete all as specified and directed

M & L for preparation old decorated surfaces of walls and providing one coat of cement base paint complete all as specified and directed.

M & L for preperation of old plstered surfaces of walls and applying one coat of oil bound distemper white or tinted all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for coloured ceramic tiles 300 x 450 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick complete all as specified & directed.

All as per item No 14 above but on vertiical surfaces such as skirting dado over and including 10mm thick renderin in cement mortar 1:4, Complete, all as directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate, as in sub base of floors, complete all as specified & directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over & including 15mm thick screed bed in CM 1:6 and machine cut, bedded and jointed with grey cement slurry mixed with pigment to match the shade of the slabe including rubbing and mirror polishing complete, all as specified & directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including cement mortar 1:4, 10mm thick backing complete all as specified & directed.

M & L for 20mm thick black granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

Taking down pelmet/ curtain rod any size with rod and bracket fixed to wall complete all as apecified & directed.

S&F fancy type MS curtain rods 22 mm dia powder coated completed all as specified & directed.

S&F decorative type knobs with bracket of MS powder coated fixing at end of pelmet rod complete all as approved by the Engr-In-Charge.

Taking down 100 mm bore CI soil waste and vent pipe complete including all fittings.

S&F 100 mm bore CI (sand cast) soil, waste and vent pipe, in any length, without ears, with cement joint, fixed to walls or laid in floors etc complete al as specified & directed.

S&F in repairs cast iron 100mm bore branch pieces (Tee) single (equal or enequal) ordinary or inverted (spigot or socket type) or with paralled branches fixed with cement joint complete all as specified & directed.

S&F in repairs 100mm bore CI bend (any radius) complete all as specified & directed.

S&F in repairs CI Nahani/Floor trap 75 mm outlet,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4), complete, all as directed.

Taking down eaves gutters and rain water pipe complete including all as specified & directed.

S&F PVC (SWR) 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed. .

S&F 110mm PVC (SWR) bends complete all as specified & directed. .

S&F PVC (SWR) 110 mm dia single Tee complete all as specified & directed. .

Taking down 75mm bore CI soil waste and vent pipe complete including all fititings complete all as specified & directed. .

S&F Cast iron vent pipes 75mm dia in any length with or without ears cement joints fixed to walls complete all as specified & directed.

S & F in repairs 75mm bore Cast iron bends (any radious) complete all as specified & directed.

S & F in repairs 75mm bore CI Tee with acces door complete all as specified & directed.

Taking down steel tubing and connection including cleaning for refixing or removing to store.

Bore 15 mm

Bore 20 mm

Bore 25 mm

S&F water tubing, medium grade, ISI marked galvanized with all fittings & fixed to walls, ceiling or laid in floors complete all as specified & directed.

Bore 15 mm

Bore 20 mm

Bore 25 mm

Re-fixing old steel tubing and connections in new or old position in walls, floors,ceiling etc complete al as specified & directed.

Bore 15 mm

Bore 20 mm

Bore 25 mm

Dismantling of exisiting unserviceable RCC/PVC water tank of Capacity not exceeding 500 litre each & removing from site complete.

All as per above item No. 39.00 above but exc 500 Ltrs but not exc 1000 Ltrs capacity

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

M&L for 50 mm thick sand stone slab , set & jointed on joists in cement mortar (1:4) over and including 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate (for providing bottom cover to PVC tank) complete all as specified and directed

S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover & miled steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed

S&F in repairs Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete al as specified & directed.

S&F in repairs PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity, White, with inlet ball valve, float and handle fixed on walls by driling holes and using PVC rawl plug of suitable size complete al as specified & directed.

S&F in repair flush pipe 32mm dia for low level flushing cistern complete all as specified & directed.

S&F in repairs wash hand basin vitreous china white / ivory colour flat size 550 x 400mm fixed including waste coupling, waste pipe & connection pipe complete all as specified and directed

S&F in repairs stop valve 15 mm bore cast copper alloy fancy type ISI marked chromium plated with long shank & cup (concealed type) screwed down high pressure screewed both ends for iron pipe complete all as specified & directed.

S&F in repairs sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm without drainage board, with plugs, washers and waste including fixing cantilever brackets complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1.00 mm thick, kitchen, with plugs, washers and waste including fixing cantilever brackets and connecting union overall size not less than 1145mm x 510mm, bowl size 560 x 410 x 200mm complete all as specified and directed.

S&F in repairs 15mm bore PVC connection 45cm long with 2 Nos PTMT nut at both ends complete all as specified & directed.

S&F in repairs 32mm bore PVC waste pipe any length with one end socketed complete all as specified & directed.

S & F in repairs 15 mm bib taps standard of PTMT any colour high pressure screwed for iron pipe ( minimum weight 90 grams) complete all as specified and directed

S&F in repairs bib taps 15mm bore fancy type, cast copper alloy, chromium plated with crtuch or butter fly handle, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs pillar taps fancy type cast copper allloy capston headed, chromium plated, screwed down, high pressure with long screwedshank and fly nut, screwed for 15mm bore iron pipe complete al as specified & directed.

S&F PVC floor trap with grating 75mm dia fixed with cement joint complete all as specified and directed.

S&F in repairs grating square 125mm size of PTMT with centre hole movable or side hole for fix to waste pipe complete al as specified & directed. (Min Wt- 100 gms)

S&F in repair tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as sped & directed.

S&F in repair brass chromium plated shower rose of 75mm size with swivel joints, incl . Fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F in repairs angle valve 15mm bore cast copper alloy fancy type ISI marked chromium plated with long shank & cup screwed down high pressure screewed both ends for iron pipe complete all as specified & directed.

Taking down shutters of any description exc 1.00 Sqm but n. exc 2.00 sqm each leaf and removing from siteComplete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed.

Taking down shutters of any description n exc 1.00 Sqm each leaf and removing from siteComplete all as specified and directed

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per specification and drawing completeall as specified and directed

Supply and fixing of 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.

S&F mild steel framed work such as grills, guard bars, barred iron doors, cooler stand, framework of water tanks and similar works, conforming to Grade E-165 (Fe 290), including welding etc. complete all as specified & as directed.

S&F mild steel framed work as in doors / gates / steel frames / chowkats etc. of angle or other section with gusset plates, rails, braces, etc., complete conforming to Grade E-165 (Fe 290), drilled for fixing of steel sheeting or other covering including necessary welding etc and fixing in position complete.

S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.

S & F second class HW Hollock/Sal/Bansum (Terminalia Myriocapra), 35 mm thick, gauged and skeleton shutters, factory made open rebated (Three panels)and prepare to receive glass, gauge etc with out sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 1991 Part-I, section 8 clause Member shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed.

S & F Steel window factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

S&F Steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame complete incl necessary AC/Cooler arrangement in window & guard bars complete all as as specified and directed. Note :Wire mesh and sheet glass shall be measured & paid separately under respective items.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple all as specified and directed

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and directed

M&L for IInd class H/W Plain , Solid , Straight chowkats and frames sec area n exe 40 sqcm complete and all as specified..

M&L for 18/19mm thick Block board grade 2 quality, interior grade, decorative type with decorative face, veneer on both faces complete, fixed with nails, including teak wood lipping 18/19 x 6mm thick fixed with nails in shelves, partition , almirah book cases, toilet boxes, racks, cup board shutter and similar works including taking down old shutter, complete, all as spepcified and directed.

S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm, complete all as specified and directed.

S&F aluminium handle 100mm, cast type, anodised complete all as specified & directed.

S&F hasp & staple 100mm size safety type, aluminium anodised with mild steel hinges pin including bolt of hinge plate & fixed with screw complete all as specified & directed.

S&F continuous (Piano) hinges mild steel bright finish or electro galvanised , width of flap when open 40mm, complete all as specified & directed.

Taking out old unserviceable peg stay from, steel windows and S&F new mild steel peg stay of required size and shape with and including one no nut, bolt and washer of required size complete all a specified and directed.

S&F in repairs butt hinges medium weight ISI marked 100mm size cold rolled mild steel completete all as specified and directed.

S&F in 300mm aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy alll as specified & directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed .

S&F in repair steel handle of 125mm incl one nut & , bolt and washer of required size completete all as specified and directed.

S&F for in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified & directed.

Hacking out old broken sheet glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips &supply & fixing new ones and S&F 3 mm thick sheet glass, ordinary / figured quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as specified & directed.

S & F sheet glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane for steel or wooden windows/doors fixed with wooden beadand pin tacked complete all as specified and directed.

M&L for preparing the new wooden surface & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer over 10cm width or girth complete all as specified & directed.

M&L for preparation of new steel surfaces over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified & directed.

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

Dismantling of (GI sheet/Galvalume) corrugated steel sheets in roofing

S & F Pre-painted galvalume aluminium zinc coating GI Based corrugated/Semi corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed

Dismantling Asbestos Cement (corrugated, semi corrugated, etc) sheets in roof covering complete all as specified & directed.

S&F 6mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with L-type or J-type or cranked hook bolts complete all as specified & directed.

Taking down aluminium door shutter of size exc 1.5 Sqm and n exc 4 Sqm each leaf, opening floor spring assembly over hauling, refixing floor spring (with new screws) and door shutter in position all as directed.

M&L for powder coated Anodised Aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

M&L for Anodised Aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

M&L for anodised aluminium door shutters, aluminium powder coated section weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified.

M&L for anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified.

M&L for anodised aluminium window shutters, any type (sliding, side hung, fix etc) aluminium powder coated section weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified.

M&L for anodised aluminium window shutters, any type (sliding, side hung, fix etc) aluminium section weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified.

Dismantling of brick/tiles in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M & L for providing 75 mm thick, plain cement concrete type D-2, (1:4:8) using 40 mm graded aggregate as in sub base of floors all as specified and directed.

M&L for factory made 60mm thick machine pressed precast cement concrete coloured interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 50 mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set and jointed in neat cement slurry and pointed in white the coloured cement to match with tile laid over and including screed bed or bedding layer 15mm thick in CM (1:6) laid over and complete all as speciied and directed.

Demolition of stone/brick masonry built in cement or cement lime mortar all as specified and directed.

M&L for brick work with flyash bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

All as per description of serial item No. 111.00 above except brick complete all as specified and directed.

M&L for 10mm thick vitrified ceramic tiles light shade(Square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.

All as per item No. 113.00 above but on vertical surfaces of wall such as dados, skirting etc set and jointed in neat slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in CM 1:4 completeallas specifed and directed

Taking down existing unservicable treatment of any description including cement plaster/cement concrete of any thickness from roof surface cleaning of roof surfaces and and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed.

M&L for screeding 10mm thick in CM 1:4 on fair faces of RCC /stone patti roof surface finished fair & even without using extra cement even complete all as spescified and directed.

M&L for five layered APP modified polymeric water proofing membrane , 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3.00 Kg/Sqm applied with bonding material using blown type bitumen conforming to IS-702 grade 85/25 @1.20 Kg/Sqm over bitumen primer conforming to IS-3384 @0.40 Kg/Sqm with final coat of bonding bitumen grade 85/25 @1.20 Kg/Sqm over APP membrane with all overlaps complete all as specified and directed.

M&L for PCC 40mm thick (minimum consolideted thickness) type B-0, using 12.5 mmgraded stone aggregate as in padding finished even and smooth wothout using extra cement with existing slope with V shaped grooves 6mm wide and10mm deep @0.40Sqm of each panel on top of padding and filled with mastic bitumen of 1:1 preparation complete all as specified and directed.

M&L for coved fillet in PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and providing one coats of synthetic enamel paint complete all as specified and directed

Complete removal of existing surface of walls and applying two coats of oil bound distemper white or tinted over a coat of primer over 1 mm thick finished coat of white care putty complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple all as specified and directed

M/s Jai Jinendra Constructions

M/s AKASH CONSTRUCTION CO.

M/S Nexus Projects

R.S BUILDERS

GOMA CONTRUCTION COMPANY