REPAIR REPLACEMENT OF COMMON AREA STAIR CASE WIRING CABLE TRAY AND LIGHT FITTING INTO LED INCLUDING BLDG SECURITY LIGHT AT NEW NAVY NAGAR UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Taking down carefully copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc.

Material and Labour for Point wiring complete with proper colour coding using, 1100 volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor conforming to IS-694, part-II, ISI marked and including drawn in concealed conduit PVC, ISI mark with all accessories on wall/ceiling/floor/roof etc, provision for fixing of modular or non modular fittings including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for the following :- NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm.

One light point controlled by one way switch.

S & F in replacement with new modular switch piano, 1 module, single pole one way 6Amp.

S & F in replacement with new ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x20mm

Taking out old wooden/PVC board and disconnecting all electric connection from switches, board and S & F modular PVC Gang box of 6 module for mounting of modular switches and sockets including blank plate for blank module.

All as per Item No 5.00 above but of modular PVC Gang box, 4 module.

All as per Item No 5.00 above but of modular PVC Gang box, 1/2 module.

S&F modular white cover plate with frame, 6 module.

S&F modular white cover plate with frame, 4 module.

S&F modular white cover plate with frame, 1 or 2 module.

Taking down unserviceable FTL and supply and fix Slim LED integrated batten of 10 Watt 2ft coolday light with powder coated CRCA decorative patti prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings including new ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x20mm complete. Make of Light Fitting : C&S Cat Part No LTTB2F10WLED/W or BN021 LED10S 6500 PSU GRS1 of Philips or BCLSB10WH LED of Bajaj.

Taking down unserviceable FTL/Bulk Head fitting and supply and fix Bulk head fitting IP-43 with die cast aluminium housing, heat resistant glass and galvanised wire guard and pin type holder with 9 Watt LED lamp including replacement of old unserviceable ceiling rose with earth terminal connection, 3 terminal/PVC/Polycarbonate, isolated body. . Make of Bulk head- Halonix, Cat No- HBH0110CFMO or BJDB100BC of Bajaj or equivalent in CG/ Wipro/C&S.

M&L for submain wiring in PVC conduit using two core of 6 sqmm armoured cable, PVC insulated stranded copper conductor, single core, FRLS drawn in PVC conduit as required at site all as specified and as directed by Engr-in-Charge.

M&L for hot dip galvanised metal perforated cable tray of size 50mm width and 25mm height, with angle, bends and all accessories required at site and fixing on wall including refixing of old existing cable wire/ netwire/ LT cable etc by tie with plastic cable tie after taking out old one complete all as specified and directed.

All as per Item No 14.00 above but of size 100mm width and 25mm height.

All as per Item No 14.00 above but of size 150mm width and 50mm height.

S & F MCB DB SPN double door conforming to IP 43 - IK 09 with acrylic door, 8 way complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

S & F MCB SPN, 32 Amp, 10 KA, 230 Volt.

S & F MCB, single pole, upto 20 Amp, 10 KA, 230 Volt.

S&F in replacement with new cable PVC insulated four core over all PVC sheathed 2.5 Sqmm stranded copper conductor cable for connecion from Panel to Timer box for power supply drawn in PVC conduit not less than 20mm as required at site on wall/floor including taking out old one all as directed. Make of wire - Polycab/Plaza/ Finolex/ Havells/L&T.

S&F in replacement with new cable PVC insulated three core over all PVC sheathed 2.5 Sqmm stranded copper conductor cable for connecion from DB to connector junction box for power supply to security light fittings drawn in PVC cashing capping or PVC conduit not less than 20mm as required at site and as directed by Engineer-in-Charge including taking out old one.. Make of wire - Polycab/ Plaza/Finolex/ Havells/L&T.

S & F junction box of size not less than 4x4 inch with connector encloser, 3 terminal/ PVC/ polycarbonate, isolated body including taking out old one.

S&F street light bracket bend to shape made as required of 25/32mm dia, GI pipe light grade fixed to pole/ Wall including M&L for fixing with the help of flat iron clamp with the help of nuts and bolts for fixing of street light fitting on the wall complete after taking out old U/S one all as specified and as directed.

Taking out Old, U/s one and S&F LED 45 Watts building street light in Aluminium PDC housing, toughened glass cover in IP66 protection with 3000 (k) including connecting light with three core copper wire from connector or ceiling rose. Make- C&S, Cat No LTESS145WLED or BRTFG45WLED WW of Bajaj or equivalent in C&S/Philips/Crompton/Wipro.

S& F Analog Time switch 3P Module, 24 hours program, backup of 100 hrs, 16 A currrent capacity with one changeover and Contactor 25A 2 NO inclosed in Metal box encloser with prewired electric connection complete after taking out old, U/S one. (Cost of metel enclosed, contactor included in the quoted rate) Cat No- TL016ABO of Indoasian or equivalent in L&T/Legrand.

Supply and Installation of Single Phase Smart Meter with the following specifications including taking out old one :-

AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10-60A anti-tamper features.

Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy, cumulative apparent energy and frequency.

Meter should have connect / disconnect functionality operable from prepaid billing software

Meter should have internal or external GPRS Modem or RF Modem to provide connectivity with the billing software. Make: L&T/ Schneider/HPL

Supply and Installation of Data Concentrator Unit (DCU) compatible for remote Automatic Meter Reading (AMR) solution and capable of communicating with the static energy Meter in the corresponding LPRF frequency band of 865-867 MHz and with the data server through GPRS and shall have minimum data transfer rate of 9600 bps, internal memory to store data of 50 modules and shall be based on Mesh network within 40 metre range. Make - L&T, Secure, Cyan Connode

Hosting and Configuration of the Web based Software with following modules:-

Meter Data Management Module The meter data management module would be responsible for collecting the data from the concentrator and make the data available to the billing system. The meter data management system would capture and provide the following data: (a) 30 min instantaneous data from all the meters for seven parameters – Cumulative Energy, cumulative Apparent Energy, Power, Current, Voltage, Power Factor and Frequency (b) Monthly and quarterly billing survey data for cumulative energy and max demand

Prepaid Billing Module-The billing module would collect the data from the meter data management module, calculate the energy consumption, calculate billing determinant and make energy data / billing data available to admin and end users. Make: Innologix, Schneider, L&T

Panther Facilities

DHARMESH ENTERPRISES

BOB ENTERPRISES

shree arihant constrution

ORIENT ELECTRIC CO