Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹63.1 LAccepted-AOC 3 165 1A KAMARAJ NAGAR KANGAYAMPALAYAM SULUR COIMBATORE TAMIL NADU 641 401 | COIMBATORE | COIMBATORE | TAMIL NADU | 641401 | ₹63.1 L Quoted ₹63.4 L | L1 | Accepted-AOC Being eligible and lowest bidder |
| 2 | L2₹64.9 LRejected-Finance NO 2 16 KANGAYAMPALAYAM SULFUR PO COIMBATORE 641 401 | COIMBATORE | COIMBATORE | TAMIL NADU | 641401 | ₹64.9 L | L2 | Rejected-Finance Being L2 |
| 3 | L3₹67.7 LRejected-Finance CHAMAVILA CHEELI CHITTADI POST PALAKKAD DIST KERALA 678706 | PALAKKAD | KERALA | 678706 | ₹67.7 L | L3 | Rejected-Finance Being L4 |
| 4 | L4₹72.7 LRejected-Finance E 11 CWE WELLINGTON A I A II A V B I | KOLKATA | WEST BENGAL | 700001 | ₹72.7 L | L4 | Rejected-Finance Being L4 |
| Sl No | Description | Qty | Unit | KSR AND COMPANY L2 | Vishnu Infrastructures L1 | jk construction L3 | VENKATESH L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Preparing existing black top surfaces by brushing with wire brush for removing caked/mud etc. sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat with bituminous primer @ 5 Kg per 10 Sqm using bitumenous cold emulsion rapid setting grade-1 (RS-1) complete all as specified and directed. | 671 | 10 Square Metre | 400 ₹2.7 L | 450 ₹3.0 L | 500 ₹3.4 L | 425 ₹2.9 L |
| 2.00 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces n.exc 50 mm deep and area n.exc 400 sqm and removing the debries to a distance n.exc 50m complete all as specified and directed. | 6.67 | 10 Square Metre | 600 ₹4,002 | 300 ₹2,001 | 400 ₹2,668 | 900 ₹6,003 |
| 3.00 | M & L for Premix bituminous macadam, with paving bitumen, laid/rolled with mechanical paver and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen of Grade VG-30 as binder, camber and gradient with 8 to 12 tonne power roller complete all as specified and directed. (Note: The rates are worked out on the basis of binder content of 4% by weight of total mix. No extra payment shall be made for any additional requirement of binder content) | 4 | Cubic Metre | 12,000 ₹48,000 | 11,000 ₹44,000 | 11,500 ₹46,000 | 10,000 ₹40,000 |
| 4.00 | M & L for bituminous premixed semi dense asphaltic concrete, 40 mm consolidated thickness using paving bitumen of Grade VG-30 with 5.5% binder content by weight of total mix using hot mix plant and mechanical paver, rolled and compacted, finished including rolling to required gradient and camber with 8 to 12 tonne power roller to required compaction complete all as specified and directed. (Note: The minimum binder content shall be of 5.5% by weight of total mix. However, additional requirement of binder content after mix desing (if any), the same shall be provided by the contractor without any extra cost to the Govt.) | 664.33 | 10 Square Metre | 5,400 ₹35.9 L | 5,000 ₹33.2 L | 4,300 ₹28.6 L | 6,000 ₹39.9 L |
| 5.00 | M & L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm using bitumenous cold emulsion rapaid setting Grade-1 (RS-1) and putting in pre mixed bituminous mecadam using paving bitumen of grade VG-30, well rammed and sealed with binder 9.8 Kg per 10 Sqm binded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of pre mixed mecadam binder and chippings) depth of potholes exc 30 mm complete all as specified and directed. | 2 | 10 Square Metre | 2,200 ₹4,400 | 5,000 ₹10,000 | 5,600 ₹11,200 | 2,500 ₹5,000 |
| 6.00 | Material and labour for Applying 2 mm thick road marking paint with reflective thermoplastic white road marking paint confirming to BS-3262 (1989), either continuous or broken lines over existing or new painting surfaces of cement or bituminous surfaces (continuous lines, centre lines, dashes, stop lines, arrows etc), n.exc 10 cm width laid down through road marking machine using thermo plastic material by incorporating the white glass powder for reflectivity in white or golden yellow colour by using applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, including cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete as direction of Engr-in-Charge and in accordance with applicable specification complete all as specified and as directed. | 3,100 | Running Metre | 75 ₹2.3 L | 50 ₹1.6 L | 130 ₹4.0 L | 83 ₹2.6 L |
| 7.00 | S & F in repairs cat eye, solar reflective type of metal body alloy of size 100mmx100mmx20mm with PMMA striplens reflector fixed with and including MS stud of suitable size complete all as per manufacturer's instruction and as directed by the Engineer-in-Charge. (Make: Dark Eye Model No. DA 972 or equivalent model of make as per list of m,anufacturer's) | 400 | Each | 400 ₹1.6 L | 1,400 ₹5.6 L | 1,800 ₹7.2 L | 400 ₹1.6 L |
| 8.00 | S & F in repair mild steel round pipe delineator 12 with Red, Orange and White colour reflectors including pre-powder coated MS pipe of 75mm dia, 1200mm (900mm above GL + 300mm below GL) height fixed in ground post hole of size 300x300x300mm with PCC 1:2:4, type B-1 (using 20mm graded aggregate) including necessary excavation and earth work etc complete all as specified and as directed by the Engineer-in-Charge. (Make: Road Star Cat No. GPD-1233 or equivelant of make as per list of manufacturer's) | 190 | Each | 1,000 ₹1.9 L | 2,400 ₹4.6 L | 3,000 ₹5.7 L | 1,400 ₹2.7 L |
| 9.00 | S & F Retro-reflective Cuationary/Warning/Speed limit sign board, equilateral triangular shape having each side of 900mm with support length of 3650mm and made up of 2mm thick aluminium sheet, each face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, massage (bi-lingual), symbols and borders etc as per IRC: 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable size of aluminium alloy rivets @ 20cm c/c to back support frame of MS angle iron of size 25x25x3mm alongwith theft resistant measures, mounted and fixed with 2 Nos MS angle iron of size 35x35x5mm to a vertical post made upto MS tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the botom end and including making holes in pipes, angles flats, providing and fixing MS massage plate of required size, steel work to be painted with two coats of synthetic enamel paint (1st grade) of requiared shade and of approved brand over a priming coat of red oxide zinc chrome primer (Vertical MS-Tee supports to be painted in black and white colours), backside of aluminium sheet to be painted with two coats of epoxy paint over a coat of primer including all leads and list including necessary earth work and excavation in any typoe of soil, PCC 1:2:4, type B-2 (using 40mm graded aggregate) as in foundation of suitable size including taking down existing sign board complete all as specified and directed. | 15 | Each Job | 6,000 ₹90,000 | 10,000 ₹1.5 L | 11,000 ₹1.6 L | 800 ₹12,000 |
| 10.00 | S & F Stickers with high intensity encapsulated type heat activated retro reflective sheeting conforming to Type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, massage ( bi-lingual), symbols and borders etc as per IRC: 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 directional mark on existing signage boards of equilateral triangular shape having each side of 900mm with support complete all as specified and directed. | 10 | Each Job | 1,000 ₹10,000 | 7,500 ₹75,000 | 7,500 ₹75,000 | 6,000 ₹60,000 |
Updated dates
Tender Value
₹57.8 L
EMD Value
₹1.1 L
Closing Date
28 Mar 2026, 6:00 pmClosed
CWE Wellington
Headquarters Commander Works Engineers Wellington, Barracks Post The Nilgiris PIN 643 231
SPECIAL REPAIRS TO GH MAIN ROAD AND MAP APPROACH ROAD FROM BLOCK NO. 01 TO 18 UNDER AGE BR-I UNDER GE DSSC WELLINGTON
2026_MES_753625_1
85033/E8
Open Tender
Civil Works
180 days
WELLINGTON
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE DSSC WELLINGTON
₹1.1 L
Yes
24 Apr 2026
21 Feb 2026
30 Mar 2026
21 Feb 2026
28 Mar 2026
14 Mar 2026
21 Feb 2026 - 27 Feb 2026
Select, Excess (+), Less (-) Less (-)
Tender Inviting Authority: CWE WELLINGTON
NAME OF WORK: SPECIAL REPAIRS TO GH MAIN ROAD AND MAP APPROACH ROAD FROM BLOCK NO. 01 TO 18 UNDER AGE BR-I UNDER GE DSSC WELLINGTON
Contract No: CWE/ WEL/ OF 2025-26
Sl. No. Item of Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency Rate in Figures to be entered by the Bidder including all Taxes etc. Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category
Preparing existing black top surfaces by brushing with wire brush for removing caked/mud etc. sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat with bituminous primer @ 5 Kg per 10 Sqm using bitumenous cold emulsion rapid setting grade-1 (RS-1) complete all as specified and directed. 10 Square Metre Excess(+) Full Conversion INR
Scarifying or picking gravelled, macadam or bituminous macadam surfaces n.exc 50 mm deep and area n.exc 400 sqm and removing the debries to a distance n.exc 50m complete all as specified and directed. 10 Square Metre Excess(+) Full Conversion INR
M & L for Premix bituminous macadam, with paving bitumen, laid/rolled with mechanical paver and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen of Grade VG-30 as binder, camber and gradient with 8 to 12 tonne power roller complete all as specified and directed. (Note: The rates are worked out on the basis of binder content of 4% by weight of total mix. No extra payment shall be made for any additional requirement of binder content) Cubic Metre Excess(+) Full Conversion INR
M & L for bituminous premixed semi dense asphaltic concrete, 40 mm consolidated thickness using paving bitumen of Grade VG-30 with 5.5% binder content by weight of total mix using hot mix plant and mechanical paver, rolled and compacted, finished including rolling to required gradient and camber with 8 to 12 tonne power roller to required compaction complete all as specified and directed. (Note: The minimum binder content shall be of 5.5% by weight of total mix. However, additional requirement of binder content after mix desing (if any), the same shall be provided by the contractor without any extra cost to the Govt.) 10 Square Metre Excess(+) Full Conversion INR
M & L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm using bitumenous cold emulsion rapaid setting Grade-1 (RS-1) and putting in pre mixed bituminous mecadam using paving bitumen of grade VG-30, well rammed and sealed with binder 9.8 Kg per 10 Sqm binded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of pre mixed mecadam binder and chippings) depth of potholes exc 30 mm complete all as specified and directed. 10 Square Metre Excess(+) Full Conversion INR
Material and labour for Applying 2 mm thick road marking paint with reflective thermoplastic white road marking paint confirming to BS-3262 (1989), either continuous or broken lines over existing or new painting surfaces of cement or bituminous surfaces (continuous lines, centre lines, dashes, stop lines, arrows etc), n.exc 10 cm width laid down through road marking machine using thermo plastic material by incorporating the white glass powder for reflectivity in white or golden yellow colour by using applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, including cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete as direction of Engr-in-Charge and in accordance with applicable specification complete all as specified and as directed. Running Metre Excess(+) Full Conversion INR
S & F in repairs cat eye, solar reflective type of metal body alloy of size 100mmx100mmx20mm with PMMA striplens reflector fixed with and including MS stud of suitable size complete all as per manufacturer's instruction and as directed by the Engineer-in-Charge. (Make: Dark Eye Model No. DA 972 or equivalent model of make as per list of m,anufacturer's) Each Excess(+) Full Conversion INR
S & F in repair mild steel round pipe delineator 12 with Red, Orange and White colour reflectors including pre-powder coated MS pipe of 75mm dia, 1200mm (900mm above GL + 300mm below GL) height fixed in ground post hole of size 300x300x300mm with PCC 1:2:4, type B-1 (using 20mm graded aggregate) including necessary excavation and earth work etc complete all as specified and as directed by the Engineer-in-Charge. (Make: Road Star Cat No. GPD-1233 or equivelant of make as per list of manufacturer's) Each Excess(+) Full Conversion INR
S & F Retro-reflective Cuationary/Warning/Speed limit sign board, equilateral triangular shape having each side of 900mm with support length of 3650mm and made up of 2mm thick aluminium sheet, each face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, massage (bi-lingual), symbols and borders etc as per IRC: 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable size of aluminium alloy rivets @ 20cm c/c to back support frame of MS angle iron of size 25x25x3mm alongwith theft resistant measures, mounted and fixed with 2 Nos MS angle iron of size 35x35x5mm to a vertical post made upto MS tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the botom end and including making holes in pipes, angles flats, providing and fixing MS massage plate of required size, steel work to be painted with two coats of synthetic enamel paint (1st grade) of requiared shade and of approved brand over a priming coat of red oxide zinc chrome primer (Vertical MS-Tee supports to be painted in black and white colours), backside of aluminium sheet to be painted with two coats of epoxy paint over a coat of primer including all leads and list including necessary earth work and excavation in any typoe of soil, PCC 1:2:4, type B-2 (using 40mm graded aggregate) as in foundation of suitable size including taking down existing sign board complete all as specified and directed. Each Job Excess(+) Full Conversion INR
S & F Stickers with high intensity encapsulated type heat activated retro reflective sheeting conforming to Type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, massage ( bi-lingual), symbols and borders etc as per IRC: 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 directional mark on existing signage boards of equilateral triangular shape having each side of 900mm with support complete all as specified and directed. Each Job Excess(+) Full Conversion INR
S & F Speed bumps of size 750mmx250mmx75mm made of sturdy plastic high resistance to sever impact and harsh weather conditions with devotail interlocking type sub units made to bind perfectly into one firm bump having pre-coloured materials (black/yellow) and UV stabilzers to keep them prepetually colourful studded with reflectors on eigther side fixed on road surface with and including nails/screws/bolts/polymer/epoxy adhesive etc all as per manufacturer's instructions including filling up hollow portion of bumps with and including PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) including taking out/dismantling of old unserviceable broken road bumps of any type complete all as specified and directed. (Make: Star Cat No. GP 1006 or equivalent of make 3M/TATA/DARK EYE) Running Metre Excess(+) Full Conversion INR
M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. Sqm Excess(+) Full Conversion INR
S & F Poly Carbonate Convex Mirror outdoor type 1200mm dia mounted and fixed to 80mm bore, medium grade MS pipe of 1500mm from NGL with PCC 1:2:4, type B-1 (Using 20mm graded aggregate) block of size 300x300x450mm including necesssary excavation and earth work and including taking out/dismantling of old unserviceable broken covex mirror of any type complete all as specified and directed. Each Excess(+) Full Conversion INR
Demoltion of Brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as directed by the Engr-in-Charge. Cubic Metre Excess(+) Full Conversion INR
M & L for Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
M & L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed. Cubic Metre Excess(+) Full Conversion INR
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as directed by the Engr-in-Charge. 10 Square Metre Excess(+) Full Conversion INR
Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) complete all as directed by the Engr-in-Charge Cubic Metre Excess(+) Full Conversion INR
M & L for 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base of flooring, etc complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
All as per Serial item No. 22 above but except tiles complete ditto. (Note: Old serviceable tiles obtained from demolition above shall be re-used at site after proper cleaning etc) Square Metre Excess(+) Full Conversion INR
M & L for rubber moulded Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, as in floors etc, including 20 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
Demolition of reinforced cement concrete in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab (For manhole etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:6 including necessary form, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately) Cubic Metre Excess(+) Full Conversion INR
S & F high strength TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. Kilogram Excess(+) Full Conversion INR
Total in Figures
Quoted Rate in Figures Select
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
BOQ_844105.xls
BOQ • 0.29 MB
tenrmrgd_85033.pdf
Tender Documents • 1.72 MB
Download all tender documents and submit your bid