GE/U(N) 59 2022 23 PROVISION OF CEILING EXHAUST FANS GEYSERS AND PROVSION OF COLOUR COATED STEEL SHEETS AND OTHER WORKS IN BLDG NO NP 17 AND T10 UNDER GE (N) UDHAMPUR

Amount

M&L for demolition of lime concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness below or above GL, complete all as specified and directed by Engr in Charge

M&L for dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed by Engr in Charge

M&L for taking down chowkhats or frame exc 1.5 sq.m but n.exc 4 sq.m with shutter (without taking off shutters from the frame) and remove from sitecomplete all as specified and directed by Engr in Charge

M&L for taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 20 mm bore laid on floor or wallcomplete all as specified and directed by Engr in Charge

M&L for dismantling of plain or corrugated steel sheeting ,any gauge, thickness including roof covering etccomplete all as specified and directed by Engr in Charge

M&L for dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr in Charge

M&L for dismantling ceiling boards,fibre pulb insulation etc or insulation boards/slabs/blankets,any thickness, including cover and MS Tee grid,complete all as specified and directed by Engr in Charge

M&L for dismantling of steel windows any description and fixed in any position including grill etc, complete all as specified and directed by Engr in Charge

M&L for dismantling of structural steel work in any descriptioncomplete all as specified and directed by Engr in Charge

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete, all as specified and directed by the Engr-in-charge.

M&L for taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories).complete all as specified and directed by Engr in Charge

M&L for demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and directed by Engr in Charge

M&L for 25mm thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tilescomplete all as specified and directed by Engr in Charge

M&L for coloured vitrifired ceramic tiles minimum 10mm thick (square) polished , light shade, area of each tiles exc 0.42 sqm but n.exc 1.00Sq.m (min. size 800mm x 800mm or 600 x 1200mm as approved by GE, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick screed bed in CM (1:4) complete all as specified and directed by Engr in Charge

All as per Srl item no 14 above but as in skirting/ dado, etc of minimum heigth 100mm, etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick rendering in CM (1:4) complete all as specified and directed by Engr in Charge

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (sqare/ rectanglear) area of each tile exc 0.11sqm but n exc 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in Cement mortar (1:4)complete all as specified and directed by Engr in Charge

M&L for glazed ceramic coloured tiles in vertical surfaces of wall of size 450mm x 300mm x 7 mm thick as approved pattern approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 as in skirting, dado, etc,complete all as specified and directed by Engr in Charge

M&L for wall cladding tiles area not exc 0.18 sqm, 7 to 8mm thick on vertical surfaces of wall such as skirting/dados etc set and jointed in neat cement slurry and pointed in white cement to match the shade the tiles over and including 10mm thick screed plaster on stone/brick masonary walls in CM 1:4complete all as specified and directed by Engr in Charge

M&L for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS Square tubecomplete all as specified and directed by Engr in Charge

M&L for factory Made Solid PVC Moulded Door Shutterof wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawingcomplete all as specified and directed by Engr in Charge Make: Rajshree Doors or equivalent as approved by GE

M & L for 16mm thick perforated particle board/ tiles for insula-tion in ceiling and accoustic purposes, 60x60 cm in size, fixed with screws to timber framework or with staples on snap grid, as fixed in patches repair, complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm long stainless steel butt hinges, medium weight, and fixed,complete all as specified and directed by Engr in Charge

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr in Charge

S&F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and directed by Engr in Charge

S&F for 15 mm dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floorscomplete all as specified and directed by Engr in Charge

M&L for cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20 cm girthcomplete all as specified and directed by Engr in Charge

S&F vitreous china wash down water closet (pedestal pattern)ivory colour, one piece, of size 625 x 360 x 700mm complete, including seat cover, connection to drain pipe and to flushing pipe antisyphonage pipe etc, complete all as specified and directed by Engr in Charge

S&F vitreous china squalting pan, orissa pattern size 580 x 440 mm white with integral foot rests and fixed with cement concrete bedding complete all as specified and directed by Engr in Charge. (Fixed in Repair)

S&F PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe suitable for EWC or Orrisa WC etc., fixed in repairscomplete all as specified and directed by Engr in Charge

S&F vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe, fixed in repair complete all as specified and directed by Engr in Charge

S&F 20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repaircomplete all as specified and directed by Engr in Charge

S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repaircomplete all as specified and directed by Engr in Charge

S&F single lever wall mixer 3 in 1, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, with provision for both hand shower and over head shower, fixed in repair,complete all as specified and directed by Engr in Charge Make : Jaquarcat part No. FUS-29281, Cera- CA- 110.

S&F centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repaircomplete all as specified and directed by Engr in Charge Make : Jaquar, Cat part No. SOL-6169B, Cera- CQ715.

S&F hand shower 105mm round shape (telephonic shower), chromium plated, with 900mm long 15mm bore chrome finish flexible pipe with hook, fixed in repaircomplete all as specified and directed by Engr in Charge Make: Jaquar-code HSH-1727,SHA-571, Cera-CP 114.

S&F shower rose, brass, chromium plated, 105mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repaircomplete all as specified and directed by Engr in Charge

S&F angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairscomplete all as specified and directed by Engr in Charge Make : Jaquar cat part No- CON-053KN, Cera- CP 108

S&F bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairscomplete all as specified and directed by Engr in Charge Make : Jaquar cat part No.- CON-037KN, Cera-CP 103.

S&F health faucet, brass, chromium plated, with 1250mm long 15mm dia chrome finish flexible pipe with wall hook, fixed in repaircomplete all as specified and directed by Engr in Charge Make - Jaquar cat part No- ALD-573, Cera- CP 105A or equivalent as approved by GE

S&F jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixedcomplete all as specified and directed by Engr in Charge Make : Jaquar, Cera or equivalent as approved by GE

S&F PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.Make-Jaquar, cat part No. ALD-805B, Cera-CG 107.

S&F PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.Make-Jaquar, cat part No. ALD-801B.

S&F stop valves, brass, fancy type with flange, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed. Make : Jaquar cat part No.CQT-23083, Cera- CP 127 or as approved by GE.

S&F soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, fixed in repaircomplete all as specified and directed by Engr in Charge Make : Jaquar, Cera or equivalent as approved by GE

S&F CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and directed by Engr in Charge

S&F CP brass grating 100mm dia, fixed in repair complete all as specified and directed by Engr in Charge

S&F toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screwcomplete all as specified and directed by Engr in ChargeMake- Jaquar cat part No. ACN-1153N, Cera-CA 410.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with PVC clamps, all as specified and directed by the Engr-in-charge.

All as per Srl item 49 above but as in refixing only with stack clamp to wallcomplete all as specified and directed by Engr in Charge

S&F110 mm bore PVC (SWR) bends with access door any radius, all as specified and directed by the Engr-in-charge.

M&L for preparation of old distempered surfaces and applying one coat of oil bound distemper on walls and projections, complete all as specified and directed by Engr in Charge

M&L for pre-painted (PPGL) galvanised steel sheets trapizodial profile having TCT 0.50mm thick,pitch not exc 200mm, crest height not less than 28mm of any approved colour, having tenslie strenth 550MPa and aluminium Zinc coating AZ-150 fixed with suitable self tapping screwscomplete all as specified and directed by Engr in Charge

M&L for(PPGL) crimp ridge of TCT (0.50 mm thick) suitable for same profiles per roof sheet having tensile strenght 550 Mpa and aluminium zinc coating AZ-150 fixed with self taping screws complete as per manufacturer's instructions complete all as specified and directed by Engr in Charge

M&L for(PPGL) galvalume steel 0.50 mm thick as in gutter of profile as directed of approved colour having tensile strength 550 Mpa and coating AZ-150 including necessary arrangement for holes for fixing rain water pipes and to be fixed with MS frame work & self taping screws complete all as specified and directed by Engr in Charge (Note: MS frame work for resting gutter shall be measured & paid separatel under respective item of BOQ)

M&L for(PPGL) galvalume steel plain sheets as in ridge of approved shape of TCT 0.50 thick of approved colour having having tensile strength 550 Mpa and coating AZ-150 fixed with suitable self taping screwscomplete all as specified and directed by Engr in Charge

S&F in repairs of false ceiling boards of Everest fibre cement designer tile white painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 1220mmx1220mm/1195mmx595mm/1220mmx610mm or any other suitable size as per existing grid frame work and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended or existing metal inter locking metal grid including required cutting / making opening of service like fixed over existing grid including necessary scaffolding etc and refixed all existing electric wiring and fixtures all complete all heights as per direction of Engr-in-charge.

S & F powder coated (of approved colour ) aluminium sections as in frame & shutter of doors, windows (sliding), ventilators (louvers/fixed type) and fixed frame including aluminium grills, etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-In-Charge. (Note :- Rates includes for necessry roller for sliding and locking of sliding windows/ ventilator, etc)

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks bracket of angles tees or flat iron stays for rain water pipes, wind ties and similar woks including welding con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engr in Charge

S&F aluminium Handles 100mm long Fancy type fixed with screws to window shutters/ kitchen cabinets complete all as specified and directed by Engr in Charge

S&F powder coated Hinges 125mm long match with window shutters fixed to door shutters with screw complete all as specified and directed by Engr in Charge

S&F powder coated Aluminium Towerbolt Hinges 150mm long match with windows shutters fixed with screw complete all as specified and directed by Engr in Charge

S&F 5mm frosted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/windows in square/rectangular exc 0.5 sq. m in each pane including powder coated aluminium beading,complete all as specified and directed by Engr in Charge

S&F 5mm frosted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/windows in square/rectangular not exc 0.5 sq. m in each pane including powder coated aluminium beading,complete all as specified and directed by Engr in Charge

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed by Engr in Charge

M&L for preparation of new or previously untreated steel surface of any description exc 10cm with or girth an applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed by Engr in Charge

M&L for rendering 15mm thick in two layers (first layer 10mm thick and second layer 5mm thick) on fair faces of brick work, Cement plaster as in CM 1:4 finishing even & smooth w/o using extra cement complete all as specified and directed by Engr in Charge NOTE Rates for execution of work included up to height of 15m

M&L for rendering 10mm thick on fair faces of brick work in cm 1:6 finished even and smooth w/o using extra cement complete all as specified and directed by Engr in Charge

M&L for preparation of new plastered surfaces and applying two coats of first quality exterior grade wheather proofing acrylic emulsion paint as per manufacturers instructions of any shade and colour over a coat of alkali resistant cement based priming paintcomplete all as specified and directed by Engr in Charge

M&L for preparation of new plastered surfaces of wall by applying 1 to 1.2mm thick Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paintcomplete all as specified and directed by Engr in Charge

M&L for prepration of new plaster surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfacescomplete all as specified and directed by Engr in Charge

M&L for complete removing existing treatment on walls surfaces by scraping down smoke soot, moulds moss & efflorences salts and trading oil & greasy spots,removing all mud,cake with steel wire brush and gunny bags from old plastered surfaces and applying two coats of distemper oil emulsion white or tinted over one coat of 1 to 1.20mm thick wall care putty over a coat of alkali resistance priming paint,complete all as specified and directed by Engr in Charge

M&L for preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coats of cement base paint on walls, complete all as specified and directed by Engr in Charge

M&L providing cement concrete 1:3:6 type C-1 ( Using 20 mm graded crushed stone aggregate ) as in coping, roof kerbs or mud stops, rounded or chamfered on edges, Gola etc including necessary formwork as required complete all as specified and as directed by the Engr-in-charge.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, using old size bricks, built in cement mortar 1:6 ,complete all as specified and directed by Engr in Charge

All as per item No 77above herein before, but except bricks. Note-Old bricks obtained against dismantling shall be used.

S&F ceiling fans complete with blades, down rods, without fan regulator and accessories, 230V, 1400mm sweep, ISI marked, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and directed by Engr in Charge

S&F exhaust fans steel body, AC ingle phase 230 volts of size 300mm sweep with blades and frame and louvercomplete all as specified and directed by Engr in Charge

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5star rated complete with all accessories such as safety valve, thermostate, NRV,and all which are requried to make functional the electric water heater complete all as specified and directed by Engr in Charge

M&L for point wiring with PVC insulated unsheathered, FRLS 1100 volts grade stranded copper conductor cable single core 1.5sqmm for one light/ fan point/ bell point controlled by one way switch, and wire to be drawn in and including concealed conduit of dia not less than 25mm complete with all accessories including MS sheet metal 1.2mm thick switch board of suitable size be fixed flush wall, with 3mm thick ebonite sheet cover and necessary screws, cap washers etc to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulated, unsheathered single core stranded copper conductor FRLS cable of size 1.5sqm.

S&F switch piano flush type single pole 5Amps one way,complete all as specified and directed by Engr in Charge

S&F switch socket combination 2 in 1, 3pin, 5 and 15 Amp flush type universal complete all as specified and directed by Engr in Charge

M&L for taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody for reuse or takeing in schedule of credit and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engr in Charge

M&L for dismantling and taking down fluorescent tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for reuse or takeing in schedule of credit (Accessories or components to be provided free for replacement by department) complete all as specified and directed by Engr in Charge

M&L for taking down unserviceable / serviciable MCB DB's/AC's box to deposit in store for keeping in safe custody for reuse or takeing in schedule of credit of any size/rating complete all as specified and directed by Engr-in-charge.

M&L for point wring for one light/ceiling fan/bell controlled by one switch with 1.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including sutiable new annealed sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point/ fan point/ Bell point controlled by one switch including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth dooly complete including cutting,chasing the surface and then making good the same in CM 1:3complete all as specified and directed by Engr in Charge (a) One light Point controlled by one,one way switch.

(b) One fan/exhaust fan/Air ciculator controlled by one way switch.

(c) All as per item No. 04 above but for bell / buzzer on independent board controlled by one push button bell switch.

(d) All as per item No 4 above but 3 Pin 5 Amp modular Socket on the same board, complete all as specified and directed by Engr in Charge

(e) All as per item No 4 above but 3 Pin 5 Amp modular Socket on independent board ,complete all as specified and directed by Engr in Charge

(f) All as per item No. 4 above but controle by 2 Nos.of two way switch.

All as per item No 89 above but M & L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm drawn through in and including PVC conduit size of not less than 25mm concecled in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and for one 6 pin modular socket outlet two in one 16/6 amps on an indeendent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green and making good, disturb surface as it is complete all as specified and directed by Engr in Charge

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 4 sqmm drawn through in and including PVC conduit size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 4 sqmm for AC box including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green and making good, disturb surface as it is complete all as specified and directed by for the following. Note : Rates are deemed to be included for chases of conduit and sunking for single pole and neutral enclosure boxes cutting and making holes in wall/floor for passing in or through conduit from DB to existing location

M&L for modular socket 6 amps 5 pin flush type, 240 volts. with polycarbonate body.complete all as specified and directed by Engr in Charge.

M&L for modular socket out let, 6 pin 6 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed by Engr in Charge

S&F sheet metal enclosure single pole and neutral two pin and earth plug and socket complete with one single pole MCB SP 20 Amps for geysercomplete all as specified and directed by Engr in Charge.Cat Pat NO- 811955+ 811127 of Indoasian (Optipro) or equvalant in havelss/ HPL

S&F Calling bell, suitable for 230 Volt, 50 Hz, single pole, AC supply complete all as directed by Engineer- in - Charge.

S&Fmodular Push bell switch piano, flush type, white colour, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F modular Switch Piano, flush type, two way, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

M&L for modular switch single pole one way 6 amps 240 volts with polycarbonate bodycomplete all as specified and directed by Engr in Charge.

M&L for modular switch single pole one way 16 amps 240 volts with polycarbonate bodycomplete all as specified and directed by Engr in Charge.

Supply and fixing modular electronic fan regulator, step type, two module 120 watt 230 volt and making all necessary connections complete all as specified and directed by Engr in Charge

S&F in replaceent of MCB DB sheet enclosure single pole and neutral 240V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed : Cat Pat No 811818 of indoasian or equvalant in Hager/ Legrand

S&F MCB, single pole & neutral, 240 Volts 40 Amps,10KA B series complete all as specified and directed by Engr in Charge .Make:-811152 of indoasian or equvalant in Hager/ Legrand

S&F MCB, single pole, 240 Volts (05 to 32) Amps,10KA, B seriescomplete all as specified and directed by Engr in Charge Make:- Catpat NO 811122 To 811129 of indoasian or equvalant in Hager/ Legrand

S&F LED light fitting 1x18 watt 220 V AC dacorative box type with driver holder, includin LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from cilling rose complete all as specified and as directed by Engr-in-Charge

S&F in replacement E-Lite LED Curve lighting fixture 10 watt LED batten,T5 with full base of extruded Aluminium body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old unserviceable tube light fitting 1x 18 watt from the site For disposal by credit all as per the direction of Engr-in-Charge.

S&F LED bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete all as specified and directed by Engr in Charge

S&F CITY 3 Decorative wall light fixture made up of polycarbonate, suitable for 15 Watt retrofit CFL/LED (B-22 Base) complete all as specified and directed by Engr in Charge

M&L in replacement for wiring with two single core 2 x 6 sqmm stranded copper conductor PVC insulated and unsheathed cable ISI marked in 25 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 1 x 6 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed by Engr-in-charge.

M&L for taking down and fixing only ceiling fan/wall mounted fan after painting and Necessary repairs / servicing including replacement of hanging assambly , bush bearing , U/S capacitor, flexible copper cord three core PVC sheathed of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan for giving connection complete all as specified and as directed by Engineer-in-Charge.

S&F ceiling rose, surface bakelite, size as per relevant IS, three terminals complete all as specified and directed by Engr in Charge

M&L for earthing complete to pole with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI wire 4 mm Dia as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision 20 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point complete all as specified & directed . NOTE: (i) The concrete pit shall be PCC 1:3:6 type C-140 mm thick pre cast cover slab of RCC(1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cost iron cover shown in the electrical plate No.3 of MES SSR Part -1 (ii) item includes the cost of 7.5 m GI pipe for protection of earth strip. (iii) PCC pits extra cost of addtional length of watering pipe,bends elbows etc.shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length Galvised earth strip 25x4 mm.

S&F ceiling fan regulator stepped electronic type 300 watt rating, 230 volts with polycarbonate body. Required screw, nut, bolt or cable are included in quoted rate, complete all as specified and directed by Engr in Charge

S & F sheet metal VTPN DBs - 250 Amp bouble door 04 way (optimum F2+12) with metal door 415 volts grade IP 43 Protection Grade fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge.

S&F MCCB adjustable type, 160 Amps with breaking capacity 36 KA , 4 pole 160 Amp, 415V complete all as specified and directed by Engr in Charge

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 6sqmm galvanised iron or steel wire complete all as specified and directed by Engr in Charge

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X 25 Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed by Engr in Charge

M&L for excavation in trenches in any type of soil n exc 1.5m deep and not exc 1.5m wide for laying of under ground cable, electric pole and getting out complete all as specified and directed by Engr in Charge

M&L for returning filling in including spreading leveling watering and well ramming 25cm in thickness in any type of soil complete all as specified and directed by Engr in Charge

M&L for removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed by Engr in Charge

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable complete all as specified and directed by Engr in Charge

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burntcomplete all as specified and directed by Engr in Charge

M&L for GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia.complete all as specified and directed by Engr in Charge

KUMAR CONSTRUCTION CO

SHIVAE CONSTRUCTION

M/S BHARAT LIGHT ELECRIC.CO