REPAIR/MAINTENANCE OF STREET LIGHTS AND ALLIED WORKS AT MILITARY STATION SRI GANGANAGAR

Amount

Taking down existing unserviceable security/street light, high mast lights, globe lights, guarden lights of any capacity/size from existing pole, bldg, wall for replacement of unsv fitting complete including checking of electric circuit for security/street light, high mast lights, globe lights, guarden lights complete all as specified & directed by Engineer-in Charge. Note: Contractor supervisor will receive complant each working day from JE E/M and will rectify the total no of complaints given to him the same day and feedback to JE E/M daily evening, failing which a recovery of Rs 20 per day/ light will be made, contractor will deploy etectrication/ helper will be made on the account, contractor will ensure all safety accesseries,T&P will be provide to the labour employed

Supply and fixing on existing taking down from street light from pole with replacement of new suitable LED plate module capacity 40 to 50 watt and support to existing light ie Havells, Crompton, Philips, Bajaj etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directded by Engineer-in-Charge

Supply and fixing on existing taking down from street light from pole with replacement of new suitable LED plate module capacity 60 to 75 watt and support to existing light ie Havells, Crompton, Philips, Bajaj etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directded by Engineer-in-Charge

Supply and fixing on existing taking down from street light from pole with replacement of new suitable LED plate module capacity 120 to 180 watt and support to existing light ie Havells, Crompton, Philips, Bajaj etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directded by Engineer-in-Charge

Supply and fixing on existing taking down from street light from pole with replacement of new LED street light driver capacity 40 to 50 watt and support to existing light ie Havells, Crompton, Philips, Bajaj etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directded by Engineer-in-Charge

Supply and fixing on existing taking down from street light from pole with replacement of new LED street light driver capacity 60 to 75 watt and support to existing light ie Havells, Crompton, Philips, Bajaj etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directded by Engineer-in-Charge

Supply and fixing on existing taking down from street light from pole with replacement of new LED street light driver capacity 120 to 180 watt and support to existing light ie Havells, Crompton, Philips, Bajaj etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directded by Engineer-in-Charge

S&F in replacement, new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP67 roadway luminaire 45 watt with high power LEDs as light source and electric driver including PVC insulated two core 1.5 Sqmm FRLS multistranded Al conductor cable with connector for connection connection complete all as specified & directed by Engineer-in Charge.

S&F in replacement Endura Highbrid Energy saving, environmental friendly. Long life exclusive innovative die-cast aluminium IP67 flood light with high power LEDs as light source, suitable for highlighting archtectural features 150 W LED complete all as specified & directed by Engineer-in Charge.

S&F in replacement, new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP67 roadway luminaire 70 or 72 watts LED with high power LEDs as light source and electronic driver including testing complete all as specified & directed by Engineer-in Charge.

M&L in replacement PVC insulated PVC sheathed Aluminium conductor electric cable 2.5 sqmm 3Core 1100 volts grade for existing street light fitting on pole complete all as specified & directed by Engineer-in Charge.

Supply and fix in replacement of GI pipe 50 mm bore light grade for protection of cable including provision of clamps, nut, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenchees complete all as specified and directded by Engineer-in-Charge

M&L for preparation of old surfaces of PCC poles and applying two coats of synthetic enamel paint with black & white or yellow colour strips 30cm each up to 1.5 mtr height from top of PCC foundation block and numbering of poles with synthetic enamel paint white in 80 mm high letters 150 mm ablve the top strip complete all as specified and directded by Engineer-in-Charge

M&L for preparation for old surface of steel tubular pole any size and type of poles and appling two coat aluminium paint over red oxide primer and applying two coats of synthetic enamel paint with black & white or yellow colour strips 30cm each up to 1.5 mtr height from top of PCC foundation block and numbering of poles with synthetic enamel paint white in 80 mm high letters 150 mm above the top strip complete all as specified and directded by Engineer-in-Charge

S&F street light bracket made out of 32/40 mm dia GI tubing medium grade made to shape 1.5 mtr long twith fixing arrangement for LED fitting duly painted with two coats of synthetic enamel paint over a coat of primer zink MS clamp and back plates fabricated complete all as specified and directded by Engineer-in-Charge

S&F pole box with fuse/MCB provision and suitable connector for single phase connection loop in and out 10 to 16 Sqmm 2 core/4 core aluminium armoured cable branch out 2.5 sqmm single core copper PVC insulated cable enclosed in thermoplastic polysterence/polycarbonate enclosure which should be shock proof safe IP 66/67 weather proof, rust proof, dust proof, water proof, flame retradant glow wire test at min 750 C internally embeded gasket with provision for cable entry through IP 66/67 thermplastic metric size glands and / or grommets enclosure size (155mm x 210mm x 92mm) including taking down the old unsv pole mounting boxcomplete all as specified and directded by Engineer-in-Charge

S&F in replacement, pole mounting box of size 300x200x105 mm, shockproof, dustproof, weather proof, including pole mounting arrangement such as clamp made of MS flat 3x25 mm size & nut bolts and washer, four way connector suitable for three phase supply, MCB SP 2.5 A 'B' curve, as per IS 10192 complete all as specified and directed by Engineer-in-Charge.

S&F in replacement street light timer, single phase for 5 KW light load comprising of nature switch, contractor and MCB housed in a pole mountable enclosure complete all as specified and directed by Engineer-in-Charge.

S&F in replacement street light timer, Three phase for 5 KW light load comprising of nature switch, contractor and MCB housed in a pole mountable enclosure complete all as specified and directed by Engineer-in-Charge.

M&L for prepration of old surfaces of GI poles of any length and applyig two coat of aluminium paint complete, including scrapping of old painted surface and one coat of red oxide paint complete all as specified and directed by Engineer-in-Charge.

M&L for Earthing complete with GI earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 Mtr below ground level, connecting to GI earth lead 4mm dia GI earth wire, by means of bolts, nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm grade stone aggregate with 40mm thick cover of RCC (1:2:4) reinfored with XPM (weight not less than 4 gs / Sqmm) and frame of angle iron 25mmx25mmx6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40mm x 8mm FI with fixing arrangement, funnel, wire wesh and earth work in hard dense soil, returning filling in and removal of suplus soil to a distance not exceeding 2KM all as per electric plate no. 3 of SSR part 1 and connecting to earth test point complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts stays etc or laying underground cable etc. In soft/loose soil & getting out complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level n.exc 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .

M & L for sand cushioning with dry coarse sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge.

M & L in replacement of PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 10sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

M & L in replacement of PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 10sqmm 4 core complete all as specified and directed by Engineer-in-Charge.

M & L in replacement of PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 16sqmm 4 core complete all as specified and directed by Engineer-in-Charge.

M & L in replacement of PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 25sqmm 4 core complete all as specified and directed by Engineer-in-Charge. (i) Excavation & earth work shall be measured and paid seprately undder respective item of this schedule.

Cutting/ trimming of tree branches not exc 10cm girth touching/ approaching the LT overhead lines with hack saw/axe to clear the LT line upto 3 metre on each side (Horizontal and / or vertical) including disposal of trimmed branches 2 KM away inside the cantonment area & clearing site complete all as specified and directed by Engineer-in-Charge. Note :- 3 metere width on each side of LT line shall be cleared and each span having not less than 3/5 conductors and min 30-40 m pole to pole distance.

S & F replacement Steel Poles (4.5 Meter) made out of Grooved GI Section with Cast Iron embellishments. The Poles have diameter min 83 mm at the Top, diameter min 107mm in middle and min 133mm at the Bottom. Base is made of die cast iron including 20 mm and 24 mm foundation bolts. Pole is pure polyester based powder coated with high corrosion resistance and chemical chromatised protection including Brackets made out of steel sections to be mounted on the Pole Embellishment are made in MS/Aluminium. The Bracket should be painted with multiple coats of weather resistant polyurethane paint.Hot dip galvanizing to be done on the bracket complete all as spd and directed by engineer-in-charge. Decorative Pole (Crompton BRASSO) Equivalent make in Havells/Philips/Bajaj Decorarative Bracket HM-DECO-SA-NS (Single Arm) Equivalent make in Havells/Philips/Bajaj - Note :- Cost of PCC work for foundation is deemed to be included in quotated rate.

S & F replacement decorative light luminaire comprises by spun housing and clear cover Post Top LED Light, 60 watt with IP 65 protection. Resistant to impact and corrosion.Glare Free and better uniformity complete all as spd and directed by engineer-in-charge. Decorative Light (Bajaj Cat Reference: ALEXANDER, ANTIQUATM) Equivalent make in Havells/Philips/CG

Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline. (ii) All light and driver make to servicable with 01 year replacement warranty.

Singla Electricals

Gyan Chand Marothia Engineer Contractor And Suppliers

Bhavya Enterprises