REPAIR TO VARIOUS PORCHES CHAJJA FINS FACIA SUN SHEDS PROJECTIONS ETC AT SALT LAKE ECSD DUM DUM AREA UNDER GE N KOLKATA

Amount

Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.

Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 1 here in before by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified and as directed.

Applying two coats of “Epoxy zinc rich primer” as protective coat to expose surface of old and new reinforcement over 10 mm dia as per manufacturer's instructions complete all as specified and as directed.

All as per item No. 3 above but reinforcement upto 10mm dia. Note for item No 3 to 4: (i) Cost of chemical i.e. Solvant free epoxy, Epoxy zinc rich primer and cement shall be measured and paid separately under appropriate item here in below. (ii) The work shall be carried out by the trained person as per manufacturer's instructions Make:- . FOSROC/SIKA/ PIDILITE

Supply only epoxy zinc rich primer. Make : Nitozinc primer of FOSROC/Friazinc R of SIKA/ or equivalent in PIDILITE

Supply only Solvant free Epoxy concrete bonding agent. Make : Nitobond EP of FOSROC/Carbodur of SIKA/ or equivalent in PIDILITE

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for mild steel TMT deformed bar or twisted bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed. Make for item Nos. 7 to 9:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyam metallics and energy ltd / Jindal.

Material and labour for providing reinforced cement concrete (1:1½: 3) type A0 (using 12.5mm graded stone aggregate) mixed with integral water proofing liquid admixture as per manufactures instructions as in columns, pillars, piers, beams, posts and struts complete all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to sides and soffits of chajja, troughs etc for rough finished concrete surfaces complete all as specified and as directed

Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing liquid admixture for concrete and mortar Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

All as per item No. 19 above but in ceiling. Make of lime for item Nos. 19 & 20:- Suryacem / Lovely Cem / Birla white.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) and finishing the surface even and smooth without using extra cement in floor all as specified and directed.

Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles complete all as specified and directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles 300x450 x 7mm thick as in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Make for item Nos. 23 to 25:- Somany / Asian Granito / Nitco / orient / Kajaria / varmora Granito Pvt Ltd /

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in pavement/plinth protection,plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) surface finished fair and even complete all as specified and as directed. Make for bitumene:- STP / Tikitar / Chosky Chemicals

Supply and fix in repair one pieced-white wash basin without pedestal 550 X 400 (oval/square pan) a/w brackets / MS nuts and bolts for fixing; fixed with and incl 32mm dia brass CP waste coupling and connecting waste pipe etc complete all as specified and directed. Make:- Neycer Kermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix in repair 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd.

S&F CP Pillar taps in repairs 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed in repairs.

Supply and fix in repair angular stop cock of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed. Make for item Nos. 30 & 31:- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) /

Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed Make:- Neycer Kermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm cocomplete all as specified and directed. Make:- M/S Johnson Padder / Hindustan sanitary ware / Millennium / Cera / Blue Star Polymers (Speed Flow) / Commander (Water Bird) / Hindware(Sleek) / Parryware(Slimline) / Prayag

Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.

All as per item No. 35 above but 20mm bore.

Supply and fix 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm sq fixed to walls , ceiling or in floors etc complete all as specified and directed. Make:- Supreme / Supreme / Prayag/ Reliance / Kisan.

All as per item No 37 above but 20 mm outer dia.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair stop cock concealed type of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed. Make for item Nos. 39 & 40:- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) /

Supply and fix in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd.

Supply and fix in repair brass chromium plated shower rose of 125mm size fixed in 15 mm dia pipe all as specified and directed. Make:- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) /

Supply and fix in repair chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. Make:- Kohler / Parryware / Grohe / Bluestar silver line.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles)with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face ,with particle board core ,supplying and fixing in frame at site as per specification and drawing Make for item Nos. 46 to 48:- M/s Rajshri Plastiwood,/ Kumar Arch Tech Pvt Ltd, M/s Sintex India Ltd,/ HINDOPAN,/ Marino / Polyline. .

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed. Make for item Nos. 52 to 54;- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag.:-

Supply and fix powder coated aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed. Make:-

Supply and fix sliding powder coated anodised aluminium window shutters for gauged/ gauged, aluminium section weighing 0.55kg/m including necessary joining cleats, roller rubber neoprene packing/gusket,etc complete all as specified and directed.(Note- Glass shall be measured and paid separately). Make for item Nos. 55 & 56:-Jindal / Indalco / Hindalco.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyam metallics and energy ltd / Jindal. .

Supply and fix steel windows with side hung double shutters (both glazed and gauged shutters) in single frame including box type hinges with steel handle, and steel peg stay, complete with glazing bars for glazed shutter, dovetailed or welded including taking down old rusted unserviceable steel window with glass panes/wire mesh/grill/guard bar and all fittings complete all as specified and as directed. Make:- M/s Modern Fabricators, 23E , Radha Madhab Dutta Garden Lane, Kolkata -10./M/s BA Enterprises, south Stn Road, Agarpara (Salpatabagan), Kolkata – 109. /M/s Sen Harvic, Vora Building, 1st Floor, 50 Nakhoda Street Bombay. /M/s Multiwyn Industrial corporation 3-B, Camac Street, Kolkata – 16 /M/s Agew Steel Manufactures PVT Ltv 522/1, Outside Pachkuva, ahmedabad – 380002 /M/s Doorwyn Industries, 55 Dharmatala Road, Salkia, Howrah ( WB) /M/s Hopes Metal Industries Ltd., P-23 Transport Depot Road , Kolkata – 27 /M/s Ankur Industries, 726 Andul Road (Podra), P.O. Denesh sheikh Lane, Howrah – 711109./M/s Steel Engineers, 203 Kabiguru rabindra Nath, Kanchrapara , 24 Parganas(N) WB /M/s NCL Altek and Seccolour Ltd, Hyderabad /M/s Bihar Boddin & Engg work, Katihar (Bihar) / M/S GS Udyog / BA Industries.

Supply and fix 3mm thick sheet glass of ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane and complete all as specified and as directed

Supply and fix 3mm thick sheet glass in repairs of ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane and complete all as specified and as directed

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm,conforming to IS, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm,conforming to IS fixed with stainless steel wire staples complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brickwork with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and applying two coats of cement base paint, first quality, over a coat of cement primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint, first quality, over a coat of cement primer complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamal paint, first quality, to wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamal paint, first quality, on steel surface of any description over 10cm widht or girth including preparation of old painted surfaces complete all as specified and as directed.

Complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatement and material and labour for applying birla wall care putty and appling two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to wall complete all as specified and as directed.

M&L for applying wall care putty and appling two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed. Makes for item Nos. 67 to 72:- Asian / Berger / Jenson & Nicholson / Shalimar.

Material and labour for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed.

All as per item No.73 above but in ceiling. Make for Lime:- Suryacem / Lovelycem / Birla white.

Material and labour for applying two coats of synthetic enamel paint, first quality, over a coat of red oxide zinc chrome primer to new steel surface, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and as directed. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

Supply and fixing in repairs anodised aluminium alloy curtain rails fixing with brackets ,stops,rollers etc. Make:- Unique Décor Marvel / Vista /Lavolor / Mac Decor.

Taking down pelmet boxes and supply & fix Decorative /Fancy type curtain rods of not length not exceeding 1.25 m of Aluminium /brass alloy suitable of 20 mm dia alongwith fancy brackets and nec fixtures complete all as specified and directed. Make:- Unique Décor Marvel / Vista /Lavolor / Mac Decor.

RBS Builders

SHRI MILAN CHANDRA DAS

The Planters Engineering Corporation

B G Trading Co.

Kanta International

M/S KARTICK DUTTA