Providing Preprinted Steel Sheet roofing in newly constructed Auction platform at Mehanadali Rohru, Distt. Shimla, H.P.

Amount

15mm Cement plaster on fair side of brick/concrete/stone walls for interior plastering up to floor all levels including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortar 1:6 (1 cement: 6 sand) and curing complete with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surface (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc.with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing 0.60 mm thick prepainted steel sheets in roofing with hot dipped metallic zink coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge ,with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zine coats sheets with top coat of regular modified polyster organic coating of 20microns over 5 microns primer coating+back coat of polyster of 5 microns over 5 microns primer coats i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia& prepainted G.I. limpet and bitument washers complete wtith all accessories as required as per the direction of Engineer in Charges. with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Painting two coats (excluding) priming coat on new steel and other metal surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters : Enamel paint.other then white. with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Sohan Singh

Manish Thakur Govt. Contactor

DHARAM PAL SHARMA

NIKHIL

SURINDER THAKUR

ANIL KUMAR

GAYATRI TEGTA

vinod kumar

AMAN CONSTRUCTIONS