REPAIR WORK TO 33 KV SUB STATION AT RLB AT AGRA MIL STATION UNDER GE (EAST) AGRA

Amount

(a) M&L for disconnecting of all electric connection from line & transformer and dismantling defective distribution transformer 2 MVA cap 33/11 KV Sl No D-7204 outdoor type and opening of top cover, taking out the top cover from transformer body by expert technician for tech inspection and checking of defects at site by AGE E/M and same as reassemble complete including servicing and cleaning tightening all electric connections and replacement of defective spare parts at site, to make it serviceable, connecting and testing complete. List of items to be replaced : Rubber/cork sheet gasket - 01 set, HT bushing with brass studs and lugs etc of 33KV - 02 Nos, new transformer oil of di electric strength of not less than 45KV - 390 Ltr, copper connection lead of 35 sqmm with lugs. (b) M&L for spray painting of outdoor transformer 2 MVA of capacity with one coat of gray paint after rubbing/scratching of old paint and marking of SM No / MES No /Cap of transformer etc all as specified and directed - 02 Nos (c) Supply, fixing and jointing and testing cable jointing kit of 11 KV (Earthed) grade cable for outdoor end termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminum conductor cable of size 240 sqmm including dismentling unserviceable joints complete for outgoing from transformer Make : 3M/Denson/Reychem - 01 Nos (d) Supply, fixing and jointing and testing cable jointing kit of 11 KV (Earthed) grade cable for indoor end box cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminum conductor cable of size 120 to 95 sqmm including dismentling unserviceable joints complete Make : 3M/Denson/Reychem - 02 Nos (inside VCB) (e) M&L for testing & calibration of HT breaker 33KV, 630 A complete with primary and secondary test as required and resetting of relay and proper alignment/servicing of mechanical system of breaker including replacement of unserviceable Tripping and closing coil, limit switch, contact jaw/point, spring charging motor, replacement of connecting plate with copper connection as per existing size and gear etc where necessary including necessary spares for smooth functioning and breakers should be tripped at any type of fault developed in feeders complete all as specified and directed - 03 Nos at RLB

H.B. Traders

M/S Chhavi Constructions Co

Jaskirat Enterprises

Singh Associates