Erection of 3.3KV overhead line with earth conductor for supplying power to CM-9 panel of Vindhya UG mine of Pinoura Sub Area of Johilla Area.

Amount

Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required Above 8.0 metre and upto 11.0 metre

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required

Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/ 33 KV as required.

Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.

Supplying and fixing of areial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp necesarry material as per specification for required size

Supplying and rection of single piece nonlinear resistor polymer type lighting arrestor (set of 3 nos) for 3 wire , 11KV overhead lines/sub-station with rate voltage of 9KV (RMS) with a nominal discharge current rating of 10 KA and complete with galvanzed clamping arramgement GI bolts nuts washers etc required.

Supplying Laying and fixing of GI earth coil of 4mm dia GI wire having 120 turns of nearly 50 mm dia and 3 mt long tail in existing pit dulyearthed with pole etc complete as reqired as per specification.

Supply and fixing anti climbing divice with 2 ply GI barbed wire 1 kg per pole complete as per MPMKVVCO specification

Supplying and fixing 33/11/0.4KV enamel coated danger board size 200x250mm with clamp on existing HT/LT structure poles.

Clamp

Add CMPS si no 11 to 16

Total impact of GST for the purpose of CTC

M/S J.D. ENTERPRISES