ADDN ALTERATION AND SPECIAL REPAIR TO BLDG NO T 289 AT 3 EME CENTRE UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline. (iii) for Item No. 42.00 to 76.00, work to be done by OEM/ authorised service provider of OEM. (iv) For bathroom/ washrooms sanitary & plumbing fittings & fixtures items alongwith connecting accessories, original equipment manufacturers (OEM/authorised service providers of OEM) will install them in the bathrooms/ washrooms. (v) Contractor shall submit their MOU with the OEM before commencement of the plumbing work or other OEM related work. (vi) Company's authorised service provider will install the bathroom/ washrooms sanitary & plumbing fittings & fixtures items alongwith connecting accessories

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh sash (42mm x 57mm) sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) area n exc 2.00 Sqm each complete all as specified and directed. Make: Duroplast/NCL Veka/Prominance.

Providing and fixing factory made uPVC frame of white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed. Note: (a) Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately. (b) Two track sliding frame of size 60 mm x 62 mm. (c) Each member of window to be measured separately with clear length. Make: Duroplast/NCL Veka/Prominance.

S&F factory made uPVC white colour three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Make: Duroplast/NCL Veka/Prominance.

S&F 5.5 mm thick frosted glass and glazing with uPVC beading including rubber packing, fixing glass to uPVC surrounds complete all as specified and directed.

S&F for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with uPVC door with beading complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in bed blocks, copings, kneelers, apex stones, bed plates, lintels and the like etc complete all as specified and directed.

S&F for wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples size of mesh 12 mm for fixing at junction of wall, beam and columns prior to plastering complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for granite (any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary bullnosing laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams , plinth beams , base for columns and mass concrete etc. complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coloumns, pillars, piers, posts and struts etc. complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5 m span etc. complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) in slabs supported on walls, beams & columns, landings, canopies, chajjas etc complete all as specified and directed.

Use and waste of formwork to rough finished flat surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of formwork to rough finished flat surfaces (square, rectangular, polygonal) sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Use and waste of formwork to rough finished flat surfaces of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Use and waste of formwork to rough finished soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as peritem No. 22 here in before but of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level n exc 1.50 m above starting point complete all as specified and directed.

M&L for APP based polymeric membrane plain finish and aluminium or silver painted to top surface as per site requirement and as directed by Engr-in-charge minimum weighing 3kg/sqm and 3mm thick reinforced with polyester non-wove fabric (wt not less than 150gms/sqm) laid on hot bitumen 85/25 grade at the rate of 1.2 kg/sqm primer surface by torch application and jointing with hot trowel to make the joints monolithic after the surface cleaning thoroughly complete all as specified and as directed.

M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:4 for laying roof APP membrane including using integral water proofing compound @3% by weight of cement applied over roof slab incl water ponding tighteness test for 72 Hrs complete all as specified and directed.

Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick (below or above ground level) including tiling if any complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, subbase and mass concrete complete all as specified and directed.

M&L for double charged polished vitrified tiles super glossy solitaire plus 9 to 10 mm thick of size 1000x1000 mm in floors etc. over and including 20mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing complete all as specified and directed. Make : Kajaria Super Glossy K 10108, equivalent in Johnson, Somany or as approved by GE.

M&L for double charged polished vitrified tiles Super Glossy Solitaire Plus 9 to 10 mm thick of size 1000x1000 mm in vertical surfaces of walls/ skirting/dado etc. over and including 10mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed. Make : Kajaria Super Glossy K 10108, equivalent in Johnson,Somany or as approved by GE.

M&L for non skid ceramic coloured 7 to 8 mm thick (square/rectangular) joint free polished area of each tile exceeding 0.18 but n exceeding 0.38 Sqm as in floors over and including 20mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan exc 6 m mean radius, built in cm 1:6 including making the brick masonry surface rough before plastering work complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, including racking out joint, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces including finishing the surfaces even and smooth (without using extra cement) including mixing water proofing compound complete all as specified and directed. Note: Water Proofing Compound will be measured and paid separately.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & finishing walls with Premium Acrylic exterior weather proof paint with Silicone additives of required shades with two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. Make : Apex Ultima Protek Asian paints paints/ Nerolac excel top guards/ Berger weather coat long life 10

M&L for preparation of newly plastered or unplastered surfaces of walls and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats on new work over a coat of 1 mm thick cement based water proof wall care putty of approved make complete all as specified and directed. Make : Asian- Tractor emulsion spark, Berger distemper, Nerolac-Little Master(Beauty).

M&L for providing and applying minimum 1 mm thick wall care putty over prepared surfaces to achive the surface even and smooth for further application of finishes complete all as specified and directed.

S&F for synthetic acrylic venetian blinds having vertical or horizontal strip of width 100 mm and all necessary fixing arrangements and accessories complete all as specified and directed.

S&F in repairs for PVC moulded cabinet with front mirror of size 450mm X600 mm with single shutter and minimum 5 compartment complete all as specified and directed. Make : PRAYAG/Polytuf/Sintex

S&F in repairs looking mirror decorative type of approved quality, bevelled silver mirror frameless or with frame rectangle for bathroom, dressing and bedroom of size 24x30 inch fixed with screws to walls complete all as specified and directed.

S&F in repairs for harrison rails, stainless steel of 25mm dia pipe decorative finish with and including supply and fixing fancy type brackets, stops, rollers etc. and fixed on walls with brass screws with PVC rawl plugs as in curtain rods complete all as specified and directed.

S&F of thin rim table top basin in size 480x480x135 mm shape round complete all as specified and directed. Make: Jaquar: OPS-WHT-15901N or equivalent in Hindware/CERA as approved by GE.

S&F thin rim table top basin in size 600x420x155 mm shape oval complete all as specified and directed. Make: Jaquar: ADS-WHT-64911 or equivalent in Hindware/CERA as approved by GE.

S&F of framed shower enclosures Model: ENNA (for bathroom size 6'x5') corner entry enclosures with door sliding to both sides in 6mm glass & standard, glass 6 mm, finish chrome of H:1950, W: 1200x1200 mm complete all as specified and directed. Make: Jaquar: JSE-CHR-ENNA 1212X or equivalent in Hindware/CERA as approved by GE.

S&F in repairs water closet (rimless) single piece WC with UF soft close slim seat cover, hinges, dual flush cistern fittings, fixing accessories and accessories set, size 385x720x710 mm, S Trap 300 mm complete all as specified and directed. Make: Jaquar ONS-WHT-10853S300UFSM or equivalent in Hindware/CERA as approved by GE.

S&F of shower panel size 1600x200 mm selfy anti finger print SS body, inbuilt ABS top shower, cascade shower with 60 nozzles, 2 moveable ABS body massage jets, hand shower with flexible hose, brass spout, shelf, thermostatic mixer with diverter, 40 cm SS braided hose, minimum water pressure required 2 bar etc complete all as specified and directed. Make: Jaquar JPL-SSF-ST88158B or equivalent in Hindware/CERA as approved by GE.

S&F of concealed body of two concealed stop cocks complete all as specified and directed. Make: Jaquar LAG-CHR-91423C or equivalent in Hindware/CERA as approved by GE.

S&F of exposed part kit of two concealed stop cocks with two handles & basin spouts with wall flange (compatible with LAG-CHR-91423C) complete all as specified and directed. Make: Jaquar LAG-CHR-91423K or equivalent in Hindware/CERA as approved by GE.

S&F of waste coupling 32 mm size full thread with 130 mm height complete all as specified and directed. Make: Jaquar ALD-CHR-705L130 or equivalent in Hindware/ CERA as approved by GE.

S&F of bottle trap (with internal partition) 32 mm size with both 300 mm long connecting pipes & wall flanges complete all as specified and directed. Make: Jaquar Cat No ALD-769L300x300 or equivalent in Hindware/CERA as approved by GE.

S&F in repairs 2-Way bib cock with wall flange complete all as specified and directed. Make: Jaquar OPP-CHR-15041PM or equivalent in Hindware/CERA as approved by GE.

S&F in repairs handshower (health faucet) with 8mm dia, 1 meter long flexible tube and wall hook with NRV (back flow preventer) complete all as specified and directed. Make : Jaquar ALD-CHR-577 or equivalent in Hindware/CERA as approved by GE.

S&F in repairs Anglular stop cock with wall flange complete all as specified and directed. Make. Jaquar OPP-CHR-15053PM, equivalent in Hindware, CERA or as approved by GE.

S&F of archimede steam cabin size 1000x1000x2100 mm (Square) of Square version shower, steam, self standing box (corner/Wall), shower tray and roof with integrated shower head 300 mm, aluminium shower column with 2 integrated round jets, shower rail, thermostatic mixer with diverter, hand shower and shelf, chromotherapy, bluetooth music system, sliding door shower enclosure, tempered glass 5 mm, steam function 2.7 KW, aroma therapy complete all as specified and directed. Make: Jaquar GSB-WHT-TU000B1H5TX or equivalent in Hindware/CERA as approved by GE.

S&F of fully automatic rimless floor mounted WC with electronic PP seat cover-auto open adjustable seat air water temperature night light fixing accessories set size 390x685x465 mm S Trap-300 mm complete all as specified and directed. Make: Jaquar ITS-WHT-89853S300PPPMAT or equivalent in Hindware/CERA as approved by GE.

S&F of bath tub combination system of PMMA sheet, PU green reinforcement, SS Frame, level sensor, safety vaccum breaker, keypad control, overflow with drain and filter, water pump 1.4 HP, slim water jets 8, back jets-4, 0.9 HP air blower, air jets 12, air regulator, disinfection, headrests, chromotherapy of size D'Arc 1800x1100x470 mm complete all as specified and directed. Make: Jaquar JWP-WHT-DARC180CX or equivalent in Hindware/CERA as approved by GE.

S&F of bath tub spouts with button attachment for hand shower with wall flange complete all as specified and directed. Make: Jaquar SPJ-87463 or equivalent in Hindware/CERA as approved by GE.

S&F in repairs soap dish holder complete all as specified and directed. Make: Jaquar Cat No ACN-1131N or equivalent in Hindware/CERA as approved by GE.

S&F in repairs towel ring complete all as specified and directed. Make: Jaquar Cat No ACN-1121BN or equivalent in Hindware/CERA as approved by GE.

S&F in repairs toilet paper roll holder chromium plated complete all as specified and directed. Make: Jaquar Cat No ACN-1151N or equivalent in Hindware/CERA as approved by GE.

S&F in repairs bib cock with wall flange, fixed complete all as specified and directed. Make: Jaquar LYR-38037 or equivalent in Hindware/CERA as approved by GE.

S&F of towel rack 600 mm long with lower hanger, stainless steel fixing complete all as specified and directed. Make: Jaquar Cat No: ACN-1181S or equivalent in Hindware/ CERA as approved by GE.

S&F in repairs maze overhead shower with shower arm complete set all as specified and directed. Make: Jaquar SHA-CHR-455L400 & OHS-CHR-1629 or equivalent in Hindware /CERA as approved by GE.

S&F in repairs corner glass shelf with brackets complete all as specified and directed. Make: Jaquar Cat No ACN-1173 or equivalent in Hindware/CERA as approved by GE.

S&F in repairs handshower dia 105 mm round shape single flow with air effect (ABS body and face plate chrome plated) with rubit cleaning system with 1 meter long flexible tube and wall hook complete all as specified and directed. Make: Jaquar HSH-1717 or equivalent in Hindware/CERA as approved by GE.

S&F of aquamax exposed parts kit & concealed body of thermostatic shower mixer with two way diverter complete all as specified and directed Make: Jaquar ARI-39681K * ALD-681 or equivalent in Hindware/CERA as approved by GE.

S&F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flanges with accessories (without hand & overhead shower) complete all as specified and directed. Make: Jaquar FUS-29281 or equivalent in Hindware/CERA as approved by GE.

S&F for dazzle kitchen modular BWR plywood vanity washbasin cabinet (Wenge wallnut) with all fittings including taking down old cabinet complete all as specified and directed. Make: Jaquar/ Hindware/ Cera as approved by GE.

S&F of chromium plated grating doom 100 mm dia with waste hole complete all as specified and directed.

S&F of PVC connection 15mm size with PTMT nuts of length 600 mm fixing complete all as specified and directed.

S&F of PVC(SWR) floor trap plain with grating including jointing with solvent cement 75mm bore complete all as specified and direcetd.

Taking up or down 20 mm bore GI steel tubing and connections complete all as specified and directed.

S&F of 20 mm bore GI tubing medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections complete all as specified and directed.

S&F of 15 mm bore GI tubing medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors concealed type complete all as specified and directed.

S&F in repairs PVC(SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L for precast cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in landings, cover slabs, precast manhole covers, set in CM 1:6 complete all as specified and directed.

Demolition and breaking up of 150 mm dia of drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed with collars and jointed in CM 1:3 complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes of 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F in repair 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed.

S&F of 110 mm bore PVC(SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F of PVC (SWR) bends any radius suitable for 110 mm dia pipe complete all as specified and directed.

S&F of rolled mild steel work as in rafter, purlins, trusses and like (beam, tee, angle, channel or flat sections (Fe 410-W(Gde E-250 quality) complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F of anodised aluminium powder coated (minimum thickness of powder coating 50 micron) as in doors, windows, ventilators, partitions shutters and frames with or without sash bar including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary fittings/accessories etc. complete all as specified and directed.

S&F of 4.8 mm thick frosted glass and glazing with aluminium beading including rubber packing alround to aluminium surrounds complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

S&F of pre- painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards and plywood any type, in any thickness and any position including cover fillets complete all as specified and directed.

M&L for anodised aluminium snap grid frame work for false ceiling of size 605x605mm using 24x38x0.50mm (composite thickness) tee (bottom pre-coated) and 24x24x0.50mm (composite thickness) wall angle incl hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified as per manufacturers instruction as in ceiling complete all as specified and direcetd.

M&L for providing and fixing gypsum board 12mm thick as in false ceiling fixed with screws or at aluminium snap grid frame work as per manufacturers instructions complete all as specified and directed.

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltrs but n exc 1000 ltrs complete all as specified and directed.

S&F of 1000 Ltrs rotational moulded polyethylene water stotage tanks (cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in floor, finished even and rough complete all as specified and directed.

Supply and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (red, black and green for single phase circuits), with multi-stranded copper conductor -stranded copper conductor 1.5 Sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-

(a) One light /Fan/bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

All as per item No. 108.00 here-in-before but wiring with 2.5 Sqmm copper cable for 5/15 Amp switch socket on independent board and provision of 1.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

All as per item No. 108.00 here-in-before but wiring with 4.0 Sqmm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F of modular switch 1 way, 6 Amp, 240 volts ISI marked complete all as specified and directed.

S&F of ceiling rose, surface type, 3 terminal, 240 V complete all as specified and directed.

S&F of lamp holder PVC/polycarbonate type with back plate suitable for batten fittings with and including 9 Watt LED bulb complete all as specified and directed.

S&F of modular socket outlet 2-in-1, 5 pin 6 Amps, 240 volts, flush type complete all as specified and directed.

S&F of modular socket outlet multipurpose 2-in-1, 5 pin, 6 and 16 Amp, 230 volts complete all as specified and directed.

S&F of modular switch piano flush button single pole one way 16 Amp 240 volt complete all as specified and directed.

Taking down old unserviceable sub main wiring of any size and of any discription complete all as specified and directed.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified and directed.

S&F in repairs LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down old unserviceable MCCB DB/MCB DB /MCB of any size and of any discription complete all as specified and directed.

S&F of sheet metal enclosure for MCCB, DB, VTPN 415 Volts 200 Amps rated busbar 4 way double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 with MCCB as incommer and MCB SP/TP in outgoing complete all as specified and directed.

S&F of miniature case circuit breaker (MCCB) 415V 125 Amps 3 Pole in the DB with making connections, testing and commissioning complete all as specified and directed.

S&F of sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 12 way double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S&F of RCBO 240 volts 63 Amps, including connection with suitable size aluminium/ copper lugs complete all as specified and directed.

S&F of MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F in repairs LED 36 watt recess mounting light fitting (2 x 2 luminaire), inbuilt sensor based smart LED auto dimmable recess mounted serene 2x2 made from CRCA sheet, white powder coated housing, opaque glare free diffuser for optimum light output, prewired with all accessories complete all as specified and directed. Make: Shakti Cat Part No-SZRSRMX036-iSS or equivalent in Philips/ Wipro/Havells.

Earthing complete with galvanised steel earth plate electrode 60cm×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR including earth pit in any soil char coal common salt, 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1, water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel complete all as specified and directed. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.

S&F of LED light fitting 1x9W / 1x10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement ceiling fans with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 225 Cu.m/min with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with hook for hanging ceiling fan complete all as specified and directed. Make: Atomberg Ltd (gorilla)/ Havells (Efficencia) / Usha (Energia)

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S&F of single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB of capacity 20 Amps complete all as specified and directed.

Supply and fixing in replacement 300 mm exhaust fan, steel body AC single Phase. 230V of size 300m sweep with blades, frame and louvers complete all as specified and directed.

S&F in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt inbuilt sensor based smart LED auto dimmable batten, made from powder coated extruded aluminium housing, opaque glare free diffuser, pre wired with all accesories complete all as specified and directed. Make: Shakti Cat Part No. SZSLAMX010-iSS or equivalent in Wipro/ Phillips/ Havells

Excavation in trenches nexc 1.5 mtr wide and nexc 1.5 mtr in depth and getting out in soft/ loose for laying cables, erection of poles complete all as specified and directed.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and directed.

Sand cushioning/sand covering for underground cable protection complete all as specified and directed.

Brick Sub Class 'B' locally available best quality laid in trenches above sand cushioning for cable protection complete all as specified and directed.

Takng down old unservicable cable and Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 35x3.5 sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified and directed.

GI Tubing, 'light grade' galvanised, with all fitting and laid in floors, under road, pavement or hard standing steel water tubing bore of tube 25 mm complete all as specified and directed.

Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & directed.

Taking up or down steel tubing and connection of 25 mm bore complete all as specified and directed

S&F of 25mm bore GI tubing medium grade with one socket both end threaded in any length including cutting, threading and making connection in new or old position with all type of GI new fittings for laid in trenches/wall/ceiling/ floor complete all as specified and directed.

M&L for refixing of existing old GI tubing and connections in new or old position including cleaning internally and externally, any grade/make laid in trenches/wall/ floor/ ceiling including all type of new fittings i.e. sockets, Tee union elbow etc complete all as specified and directed

(a) 25 mm bore

(b) 20 mm bore

S&F in replacement Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed for following size:-

(a) 25 mm bore

(b) 20 mm bore

Deduct Schedule of credit (calculation will be done off line) Rs. 100321.00

Adamya Group Of Company

Jyoti enterprises

ROYAL CONSTRUCTION

Samaksh Enterprises

M/s VIKAS TRADERS

CREATIVE CONSTRUCTION

Vee kay construction