REPAIR/ MAINT OF CERTAIN INTERNAL ELECTRIC SUPPLY, SUMMER AND WINTER APPLIANCES AND OTHER MISC E/M WORKS AT J-1 AND J-2 LOC

Amount

M & L for servicing of AC's split type of capacity 1 /1.5 / 2.0 TR inner & outer unit of any make, cleaning of outdoor condenser unit, indoor unit cooling coil, with chemical solution c-shine or equivalent and high pressure water jet pump, greasing to condenser fan, checking, tightning all electrical connections, washing of air filter, oiling and tightening of all nut, bolts, etc complete all as directed.

M&L for replacement of compressor sealed unit suitable for air conditioner split type of capacity 1.5 TR in outdoor unit including taking out old unserviceable compressor, cleaning flushing, vaccumizing the system, recharging of gas/ refrigerant in adequate quantity, soldering/ brazing of suction, discharge and charging line complete all as specified and as directed. Make:- Kirloskar/ LG/ Toshiba/ Hitachi/ Gujral/ Carrier/ Tecumseh/ Usha Shri Ram./ EMERSON COPELAND/ Mitsubishi

All as per srl item No. 2.00 above but suitable for air conditioners of capacity 2.0 TR. Note (for item No. 2.00 to 3.00) : Cost of refrigerant gas shall be deemed to be included in the item rate.

Supply, replacement, connecting and testing of condenser blower motor with fan blades motor suitable for 1.5/2 TR split AC 240 volts single phase, all as directed. Make: Khaitan/ Universal/ CG./ Carrier/ Voltas/ Sidwal.

Supply, replacement, connecting and testing of indoor blower motor suitable for 1.5/2 TR split AC 240 volts single phase, all as directed. Make: Khaitan/ Universal/ CG./ Carrier/ Voltas/ Sidwal.

Supply, replacement, connecting and testing of indoor blower suitable for 1.5/ 2 TR split AC 240 volts single phase, all as directed.

Supply and fixing in replacement of temperature sensor as per existing type and size suitable for 1.5/2 TR split AC complete all as specified and as directed.

Supply and fixing in replacement of starting/running capacitor 40/50 MFDconforming to IS specification suitable for 1.5/2 TR split AC complete all as specified and as directed. Make: Havells/ Unistar/ Asian/ EPCOS/ Sarda/BAJAJ

Material & labour/ charging of refrigerant gas in split type AC 1.5 Ton capacity including vaccumizing, leakage test and rectification of leakages etc complete all as directed.

All as per item No 9.00 above but of capacity 2.0 TR complete.

Repair/servicing of Electronic PCB Board for non inverter AC of any make all as specified and as directed.

Repair/servicing of Electronic PCB Board for inverter AC of any make all as specified and as directed.

S&F in replacement universal remote for any make/type of AC all as specified and as directed.

S& F in replacement flare nut of size as per existing including necessary flaring of copper tubing complete.

Supply & fixing in replacement of copper pipe for 1/2" to 5/8" including heavy duty insulation with wrapping with packing brown tape suitable for AC split type of capacity 1.5/2 TR including cutting and soldering, brazing etc complete all as specified and as directed.

Supply & fixing in replacement PCB remote plate DC operation suitable for hot and cold operation of AC split type 1.5 /2 TR of any complete with remote all as specified and as directed.

Supply and fix metal plug soket suitable for industrial socket plug. Make Legrand/Siemens/ ABB

Supply & fixing in replacement of copper pipe for 1/4" to 5/16" including heavy duty insulation with wrapping with packing brown tape suitable for AC split type of capacity 1.5/2 TR including cutting and soldering, brazing etc complete all as specified and as directed.

M&L for Top up of refrigent gas in spilt type AC Capacity 1.5 / 2.0 ton complete all as specified and as directed .

Supply & fixing in replacement of heavy duty nylon insulation with wrapping with packing brown tape suitable for AC split type of capacity 1.5/2 TR including cutting and soldering, brazing of copper pipe if required complete all as specified and as directed.

Supply and replace PVC drain pipe of standard size complete all as specified and as directed.

S&F in repair condensor coil set made out of copper pipe and fins suitable for split AC of capacity 1.5/2 TR all as per existing type and size including cutting soldering and testing complete all as specified.

S&F in repair cooling coil set made out of copper pipe and fins suitable for split AC of capacity 1.5/2 TR all as per existing type and size including cutting soldering and testing complete all as specified.

Supply & fixing in repair capillary and filter suitable for AC Split type of capacity 1.5/2 TR/ deep freezer, water cooler, refrigerator of suitable size including cutting, soldering, brazing etc complete all as specified and as directed.

Supply & fixing in repair expansion valve suitable for AC Split type of capacity 1.5/2 TR including cutting, soldering, brazing etc complete all as specified and as directed.

S&F in repair air filter suitable for split AC all as directed.

S&F in repair reversible valve 4 way with plunger AC 200/240 volts 50 c/s as per existing make and type suitable for AC split/window type of capacity 1.5 / 2.0TR including repair/ modification to remote plate, cutting, soldering, brazing complete including charging if gas required to maintain the required pressure complete all as specified and as directed. Note: Cost of all modification required including charges in wiring connections and gas cycle system are deemed to be included in item rate nothing shall be paid extra.

M&L for servicing of voltage stabilizer of capacity 4/5 KVA by opening up and checking the fault, replacing necessary spares and make it functional all as specified and as directed.

Supply & fixing in replacement of voltage stabilizer copper wounded for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with of capacity 16 Amp rating min with digital dispaly complete all as specified and as directed. Makes: V-Guard/Blue Star/ Logicstat.

All as per item No. 29.00 here-in-before but for 12 Amp rating complete.

M&L PVC insulated and sheathed, flexible wire with multi stranded copper conductor wire of size 3 core, 1 sqmm, ISI marked complete all as specified and as directed.

M&L PVC insulated and sheathed, flexible wire with multi stranded copper conductor wire of size 3 core, 1.5 sqmm, ISI marked complete all as specified and as directed.

M&L in replacement PVC insulated and sheathed, round flexible wire with multi stranded copper conductor wire of size 3 core, 2.5 sqmm, ISI marked complete all as specified and as directed.

Taking down old unserviceable sealed compressor and supply & fixing of new compressor sealed unit suitable for water cooler 40 Ltrs capacity including cleaning, vaccumizing, gas charging of adequate quantity and testing on load complete all as specified and as directed. Make: USHA / Sriram /Emerson / Kirloskar/ Carrier/ Tecumshah.

All as per description of Srl item No 34.00 here-in-before but sealed unit compressor suitable for water cooler capacity 80 Ltrs

S&F in repair desert cooler stand made out of MS angle iron including cutting and welding, painting with two coat of synthetic enmel paint over a coat of red oxide primer all as directed.

Supply and replacement of water tap brass CP with inner/outer threads push type or with rotary knob of size 15 mm dia as per existing type and size complete all as specified and as directed.

Supply and replacement of water stop cock brass CP with inner/outer threads push type or with rotary knob of size 15 mm dia as per existing type and size complete all as specified and as directed.

Supply and fixing in replacement of thermostat switch suitable for water coolers complete all as specified and as directed. Make : Danfoss/ Renutrol/ Indfoss or equivalent

Supply and fixing in replacement of starting relay suitable for water coolers of capacity 40/80Ltr complete all as specified and as directed. Make :- Danfoss/Renutrol/ Indfoss or equivalent.

Supply & fixing in replacement of starting/running capacitor suitable for water coolers 40/80Ltr complete all as specified and as directed. Make :- USHA/UNIVERSAL/ HAVELLS/EPCOS/ sarda or equivalent.

S&F in replacement of overload protector suitable for water cooler of capacity 40 Ltrs complete all as specified and as directed. Make :- Danfoss/Renutrol/ Indfoss or equivalent.

All as per item No. 42.00 above but of capacity 80 Ltrs.

Taking down old and unserviceable sealed compressor and supply and fixing new sealed compressor unit for refrigerator of capacity 415 Ltrs including cleaning, vaccumizing, gas charging of adequate qty in the unit and soldering/ brazing of suction and discharge and charging line complete all as specified and as directed. Make: Kirloskar/ LG/ Voltas/ Godrej/ Hitachi/ Toshiba/ Carrier.

Taking down old and unserviceable sealed compressor and supply and fixing new sealed compressor unit for deep freezer of capacity 405 Ltrs including cleaning, vaccumizing, gas charging of adequate qty in the unit and soldering/ brazing of suction and discharge and charging line complete all as specified and as directed. Make: Kirloskar/ LG/ Voltas/ Godrej/ Hitachi/ Toshiba/ Carrier/Mitsgubishi/Whirlpool/Copeland

All as per item No 45.00 above but for deep freezer of capacity 310 Ltr .

S&F electronic PCB board of Refrigerator capacity 410 Ltrs as per existing type and size including testing complete all as specified and as directed.

Supply and fixing of starting relay with over load protector kit complete as per existing size and type complete all as specified and as directed Make :- Danfoss/ Renutol/ Indfoss or equivalent.

S&F in replacement fan motor any sweep suitable to operative on AC, 220/240 volts, 50 c/s complete with frame square all as per existing size/type suitable for deep freezers or water cooler all as specified and as directed

Taking down existing Split AC 1.5/2.0 TR indoor unit and out door unit complete by disconnecting refrigerent suction and discharge lines, opening nuts and bolts taking out brackets of indoor and outdoor unit from walls, taking out Voltage stabilizer from wall, reinstall in same place after necessary repair work or shifting to another loc in unit without damaging the AC'S all as specified and as directed.

S&F in replacement Brackets for fixing split AC 1.5/2.0 TR indoor and out door unit with walls made of MS duly powder coated factory made with bolts, nuts and washers and 04 Nos of fastners complete all as specified and as directed.

S&F in replacement Floor Stand for fixing split AC 1.5/2.0 TR out door unit made of MS duly powder coated factory made with bolts, nuts and washers and 04 Nos fastners complete all as specified and as directed.

M&L for fabrication of tray made of GI sheet of size matching to split AC outdoor unit 1.5/ 2 Ton complete with necessary provn of drain and fixing on the oudoor unit stand complete

M&L for refrigerant R-134a gas complete all as specified and as directed.

S&F in replacement multifunction safety valve for geyser any capacity.

Supply & fixing in repair for PCB plate suitable for split type AC 1.5/ 2 TR of existing with remote complete all as specified and as directed by Engineer-in-Charge.

M&L for service valve for split AC 1.5/2 ton comlete.

M&L for battery 12V, 180 Ah complete all as directed. Make: Exide/ Amaron/ Luminous.

Supply, laying, testing, commissioning of XLPE insulated, PVC sheathed , aluminium conductor heavy duty 1100 volts grade steel strip or wire armoured cable laid in trenches/ through pipes/ under road, floor complete of size 25 Sqmm, 3.5 core all as specified and as directed

M&L for MCCB 100 Amp, 4pole with thermal and magnetic release with copper links/ spreader and phase separator complete.

Supply and fixing aluminium service cable PVC insulated flat or circular of size 6 Sqmm 2 Core complete all as specified and as directed.

M&L for single phase preventor complete all as speciifed and as directed.

M&L for LED flood light 60 watt, IP-66 with lumen efficacy more than 100 lumen/ watt complete all as specified and as directed Make:Philips/ Bajaj/ Crompton

M&L for LED flood light 90watt, IP-66 with lumen efficacy more than 100 lumen/ watt complete all as specified and as directed. Make:Philips/ Bajaj/ Crompton.

Supply, laying, testing, commissioning of XLPE insulated, pVC sheathed , aluminium conductor heavy duty 1100 volts grade steel strip or wire armoured cable laid in trenches/ through pipes/ under road, floor complete of size 10 Sqmm, 2 core all as specified and as directed

Servicing of ducted AC of (2 x 17 TR) by washing of coils with C-Shine chemical indoor and outdoor unit, cleaning of filter, cleaning of any choked copper pipe, checking up of Electrical connections/ controls etc complete all as specified and as directed.

Material & labour for detection of leakage in the system of AC plant package type of capacity 2 x 17 TR working capacity + 1 x 17 TR standby by charging gas, maintaining pressure 350 PSI or as recommended by OEM including checking of gas leakage points with halide torch/ soap foam solution in system including rectification of leakages by gas welding, tightening of all flare nuts, valves etc and after pressure test, flushing the system complete all as specified and as directed by Engineer-in-Charge.

Supply & charging refrigent gas R-22 for 1.5/2.0 TR split/window AC upto the required pressure and testing of plant complete all as specified and as directed by Engineer-in-Charge.

M&L for 3 pole contactor 32 amp rating coil voltage 230/415 volts as reqd at site.

M&L for MCB TP 63 Amp, C curve 10 KA complete

M&L for MCB TPN 63 Amp, C curve 10 KA complete

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and as directed by Engineer-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick each layer complete all as specified and as directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-charge.

Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable and punned down to a thickness of 18cm in trenches complete all as specified.(Note: Punned thickness of 18cm will be measured and paid)

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and as directed by Engineer-in-charge.

M&L Quartly Maintenance and servicing of DG Sets comprising prime mover and alternator with accessories,control panel and connected electric circuits with various type of sensors etc including checking lubricating oil,coolent,filter,v-belt,self starter,battery power,gauges and other connected accessories, cleaning of alternatorwith vaccum cleaner, attending faultof AMF panels and replacing the defective parts and identifying functioning of the DG Set (if any )of the following capacities complete all as specified and as directed:- DG Set of capacity 125 to163 KVA Note (a) Item comprises site visit charges for authorised technician of OEM of DG Set (or) qualified/experienced technician of DG Sets for checking, identifying the functionality of DG Set and will carry out required preventive maintenance work of DG Set and ensure smooth functioning of DG sets and connected works. b) One Quarterly maintenance will be paid as "Each Job". (c) Major spares of DG Set will be measured and paid seperately under relevent item of the CA catered as supply only. (d) Technician will visit each DG Set quarterly for routine checkup/servicing on date fixed (or) as and when required (in case of break down of DG Set). (e) Minor spares like nuts/bolts, washers, oil seal, gaskets, cotton waste, clamps shall deemed to be included in the job.

Supply and top up coolant oil. Make : Volvo line / Servo / Castrol/ HP/ BP

Supply and top up engine oil 15W40 grade. Make : Volvo line / Servo / Castrol/ HP/ BP

Supply and top up Battery Distilled water.

Dismantling, removing the self starter, motor from the engine of following capacity DG sets, opening the self starter body and overhauling/servicing, replacement of carbon brushes with holders, contact plates, jumping leads and seals, re-varnishing the field coil, armature, re-assembling, testing for smooth functioning and re-fixing with the engine and connecting complete all as specified and as directed for 125 to 163 KVA DG set

M&L re-painting of desert cooler internally and externally including removing of old paint and preparing surfaces for repainting and applying two coats of synthetic enamel paint by using spray gun at position or by taking down from location within overall quoted rates complete all as specified and as directed.

Supply and fixing in repair front air grill of desert cooler complete as per existing type and size all as specified and as directed.

Supply & replacement of submersible water pump of capacity 18 watt, single phase, 220 V for desert cooler with connecting wire complete all as specified and as directed. Make: Universal/ Khaitan /CG

Supply & replacement of desert cooler water spraying pvc pipes and junctions complete all as specified and as directed.

Supply and replacement Wood wool pad at site for desert cooler any size / cap complete all as specified and as directed.

Supply & fixing in replacement Starting capacitor 4.0 mfd heavy duty suitable for desert cooler complete all as specified and as directed. Make: Usha/ Tibeon/ Keltron/ Asian/ Havells/ EPCOS or equivalent.

Supply & fixing in replacement Top plug 6 Amp all as specified and as directed. Make: Anchor/Havells/Cona/SSK.

Supply and fix in replacement PTMT/ PVC connection of size 15mm dia 300mm for fix along with desert cooler complete all as specified.

M&L for service valve for split AC 1.5/2 ton comlete.

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth strip size 32 x 6 mm as earth lead connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 print and as directed .

Supply and fixing (in repairs) voltage monitoring relay (VMR), existing model for AMF panels 415 volt, AC 50Hz all as specified and as directed.

Supply & Fix Astronomical Digital timer switch for switching on/off lights according to rising/setting of the sun with combination function for creating switching programs in which devices are switched according to astronomical time and/ or fixed preset time, current capacity 16A, weekly program with 1 changeover (1 CO), Total 28 programs min complete in powder coated CRCA sheet enclosure of suitable thickness with MCB TPN 32 Amp min, 3 pole contactor 32 Amp and MCB for manual switching of lights, fixing arrangement i.e. DIN rail complete with necessary porcelain insulator for incoming and outgoing cable connections with reqd clamp duly painted to fix on pole complete all as specified and as directed. Make of timer switch : Siemens /Schneider/ L&T/ Legrand/ ABB

S& F factory made junction box of size 300 x 200 x 100 mm suitable for post top lantern, made out of CRCA powder coated sheet 2 mm thick having front hinged shutter with lockable arrangements, outdoor type, weather proof having the provision to connect incoming and outgoing cable of size 16 sqmm 2 core and one number MCB SP 10 KA, C-curve. 6 Amps, 240 Volts on two DMC insulator and earthing plug complete all as specified and as directed. Note : (i) Clamps, nut, bolts and washers will be measured and paid separately, (ii) MCB shall be measured and paid for seperately.

S & F LED street light fitting 60 watts,made up of pressure die-cast aluminium housing with toughened clear glass with mandatory secondary optics individual lenses, with SS screws, IP-66, luminaire efficacy more than 110Lm/W, CCT 5700K ANSI, CRI>70, THD<10%, PF >0.95, LED source : Hi power LED 3 to 5W, having external potted Constant Current driver moisture resistant (installed in separate independent compartment) with internal surge protection 4KV having under voltage, over voltage, phase to phase protection and short circuit protection and auto recovery mode, operating range 150 V to 270 V AC at 50Hz, Auto Cut off >300 V and with separate external Surge protection device 10 KV suitable for fitting on 32/40mm dia bore pipe bracket including making connections with PVC insulated 3 core copper conductor cable 0.75 Sqmm min of suitable length complete all as specified . Make : PHILIPS / BAJAJ /Crompton. (iii) All LED fittings shall have 2 years written Warranty from local office bearer of manufacturer. (iv) The old unserviceable LED fitting shall be issued by JE incharge after deducting amount as per Sch of credit at the time of RAR. (v) The old unserviceable light fitting may be of lower wattage/ old specification, no claim will be entertained on this account.

S&F in replacement CVCC type, BIS marked electronic driver duly enclosed potted LED driver having protection against over voltage, short circuit and open circuit, voltage band 100 volts to 270 volt, power factor 0.90 suitable for LED street light of capacity 45 W complete all as specified and as directed. Make : Polycab/ Crompton/ Halonix/surya/Philips / Bajaj

S&F in replacement CVCC type, BIS marked electronic driver duly enclosed potted LED driver having protection against over voltage, short circuit and open circuit, voltage band 150 volts to 270 volt, power factor 0.95 suitable for LED street light of capacity 60 W complete all as specified and as directed. Make : Polycab/ Crompton/ Halonix/surya/ Philips / Bajaj

M&L for SPD 10 kv suitable for street light / fload light fitting complete all as specified and as directed .

S & F Micro processor controller for DG set of 125 KVA cummins complete incl removing control, power cable connections & re-fixing connections complete.

Attending of complaints of package type/ducted AC plant 4x17 TR for any type of complaint w.e.f mechenical,electrical,electronic parts/Gas within 24hrs by skilled ref AC mechnic complete to make AC plant functional all as specified and as directed.

Taking down carefully copper / aluminium point wiring of any type (i.e. on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, wooden batten, conduit etc. including accessories such as wooden gutties/rawal plug, screw for taking creditof unserviceable items and keeping safe serviceable items for reuse at site etc including making good disturbed surface to match the existing surface.

Material and labour for point wiring for light/fan point with 1.5 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit medium grade ISI marked with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes for modular cover sheet of suitable modules and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one light point controlled one switch complete all as specified and as directed.

All as per Srl Item No. 104 but for 3 pin 5 Amp socket point controlled by one switch on independent board.

All as per Srl Item No. 104 but for 3 pin 5 Amp socket point controlled by one switch on same board.

Ditto all as per item No.104 about but with 2.5 sqmm multistranded copper multistranded conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board complete all as specified and as directed.

S&F in repairs switch piano flush type 6 Amps 230V AC single pole one way.

M&L ceiling rose, 65 x 50mm three terminals complete all as specified & directed.

S & F switch Piano 16 Amps, flush button type, SP, one way, 230 Volts, AC complete all as specified & directed.

S & F socket out let multipurpose 3 pin 6 Amps, flush type, 230 Volts complete all as specified & directed.

S & F socket combination ,6 pin ,16 amps, flush type, multipurpose, 230 / 250 volts , AC with ISI marked complete all as specified & directed.

S & F MODULAR Bell Push 06 Amp 1 module complete all as specified and as directed. Make:- L&T/ ABB/ Legrand/ Schneider.

M & L Bell ding dong type AC 230 V complete all as specified and as directed. Make:- L&T/ ABB/ Legrand/ Schneider.

S & F MODULAR fan regulator step type 120W, 02 module complete all as specified and as directed. Make:- L&T/ ABB/ Legrand/ Schneider.

Supply and fix in replacment switch modular type, 6 Amps, 240 Volt AC single pole, one way including taking down existing switch complete all as specified. Make:- L&T/ ABB/ Legrand/ Schneider.

Supply and fix switch modular flush type, 16 Amps, 240 Volt AC single pole, one way including taking down existing switch complete all as specified. Make:- L&T/ ABB/ Legrand/ Schneider.

Supply and fix socket out let 6 Amp, 3 pin modular type including taking down existing socket complete all as specified. Make:- L&T/ ABB/ Legrand/ Schneider.

Supply and fix Socket outlet multi purpose 3 in 2/3 pin, 6 & 16 Amps, modular type including taking down existing socket complete all as specified. Make:- L&T/ ABB/ Legrand/ Schneider.

S&F SPN sheet metal industrial socket plug & enclosure with a two pin and earth plug and socket complete with one MCB 20A and metal top plug complete all as specified and as directed.

M&L for in replacement of submain wiring with Two Run of PVC insulated unsheathed multi stranded copper conductor FRLS wire 4.00 Sq mm 1100 volts grade and including 4 Sq mm FRLS PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in existing PVC/steel rigid conduit incl making good to disturbed surface complete. Note : Two run of 4.0 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor and PVC conduit shall be measured & paid as one unit.

M&L for in replacement of submain wiring with Two Run of PVC insulated unsheathed multi stranded copper conductor FRLS wire 6 Sq mm 1100 volts grade and including 6 Sq mm FRLS PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in and including PVC rigid non metalluc conduit medium grade incl making good to disturbed surface complete. Note : Two run of 6 Sqmm cable and one run of 6 Sqmm cable as earth continuity conductor and PVC conduit shall be measured & paid as one unit.

Supply & fixing LED tube light fitting mirror type with high out put diffuser 2 feet 10 watt 220 V AC with driver, including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Crompton/ Bajaj/ PHILIPS

S & F Decorative wall light fixture made up of Polycarbonate, suitable for 9 watt LED lamp (B-22 base) 230V includind LED lamp 9 watt, prewired including removing old fitting all as specified and as directed. Make: Crompton/ Bajaj/ PHILIPS

Supply and fix Square/Round surface mounted LED SURFACE/ Recess mounting DOWN LIGHT of 9/10 watt 6500K complete all as specified and as directed. Make: Crompton/ Bajaj/ PHILIPS

S&F in replacement LED Tube light CRCA Box type fitting 20W (single/ double side) complete with 20 watt LED tube rod retrofit type and connecting electricity to celling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and as directed. Make: Crompton/ Bajaj/ PHILIPS

S & F for batten holder insulated body all as specified and as directed. Make: Crompton/ Bajaj/ PHILIPS

Supply and fixing 10 watt LED bulkhead having LED strip & inbuilt driver, aluminium housing with opal/ polycarbonate diffuser including taking out old fitting all as specified and as directed of Crompton cat or equivalent make in Make: Crompton/ Bajaj/ PHILIPS

S & F in repair 34/36 Watt 2 x 2 LED surface mounting type Ceiling light fitting, LED luminaire 600 mm x 600 mm, 240 V AC which provides soft-light and glare free symmetrical illumination suitable for grid ceiling recess mounting/ surface mounting including Bracket nuts, bolts washer as required for fixing. Make: Crompton/ Bajaj/ PHILIPS

S & F LED bulb of 12 watt of philips or equivalent make in Crompton/Bajaj/for decorative light fitting including removing cover and refixing all as specified and as directed. Make: Crompton/ Bajaj/ PHILIPS

S & F LED bulb of 9 watt of philips or equivalent make in Crompton/Bajaj/Havells for decorative light fitting all as specified and as directed. Make: Crompton/ Bajaj/ PHILIPS

S&F double door metallic sheet metal enclosure TPN DB 4 way, 415 V with copper bus bar complete suitable for MCB TPN 63 Amp fixed properly in concealed position with any type of civil work all as specified & directed. Make:- ABB/ Schneider/ Legrand/ Siemens.

S&F double door metallic sheet metal enclosure for V-TPN DB 4 way, 415 V with copper bus bar complete suitable for MCCB 100 Amp fixed properly in concealed position with any type of civil work all as specified & directed. Make:- ABB/ Schneider/ Legrand/ Siemens.

Supply and fixing MCB, Single pole & neutral 240 volts,capacity 40 Amps to 63 Amp, 50 Hz,10KA complete all as specified. Make:- ABB/ Schneider/ Legrand/ Siemens.

Supply and fixing MCB, Single pole 240 volts,capacity 16 Amps to 32 Amp, 50 Hz,10KA complete all as specified. Make:- ABB/ Schneider/ Legrand/ Siemens.

Supply and fix double door sheet metal enclosure for DB, SPN 8 ways, 240 Volt with copper rated bus bar complete fixed in concealed position with any type of civil work all as specified & directed. Make:- ABB/ Schneider/ Legrand/ Siemens.

Taking down ceiling fans, any make and size, removing electrical connection, shifting to MES workshop for repair, etc complete all as specified and as directed.

Hanging and Fixing repaired ceiling fan incl collecting from MES store yard with fixing blades and making electric connections and testing in position complete all as specified and as directed. Note:- Spare parts shall be measured & paid separately.

M&L for complete Repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at work shop, incl dismantling the ceiling fan parts i.e. blades, fan rod, canopy, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, blade and greasing/oiling etc assembling, cleaning and testing of ceiling fan as directed. Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Writing of MES Nos and painting of ceiling fan shall be measured & paid separately uner relevant item of Sch 'A'. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge & contractor. (v) Cost of minor part i.e. Cotterr pin, PVC connector, screws shall be deemed to included in the cost of quoted rate.

S&F in replacement of ball bearing 6201 2RS of ceiling fan complete including testing of fans complete all as specified and as directed. Make : SKF/FAG/NTN

S&F in replacement of ball bearing 6202 2RS of ceiling fan complete including testing of fans complete all as specified and as directed. Make : SKF/FAG/NTN

S & F in replacement of Gun metal bush of suitable size for ceiling fan 1200/1400mm complete all as specified and as directed.

Removing of old burnt winding any type, cleaning stator complete for burnt wiring, carbon residue and rewinding of stator winding of any type/any make fan/ any stator design ceiling fan of 1200mm sweep with superior quality super enameled winding copper wire of existing specification, gauge and weight with superior quality insulation for satisfactory functioning in presence of JE incharge complete all as directed by Engr-in-Charge

M&L for painting one coat of synthetic enamel paint (white) using spray machine painting on the surface of ceiling fan of 1200/ 1400mm sweep complete after preparation of surface i.e cleaning, washing of surfaces filling cavities with filler, cleaning dust and dirt all as specified and as directed by Engr-in-Charge

Supply only U clamp/ brass bracket assy with rubber reel with nuts, bolt 10mm dia, lock/ split pin, washer suitable for ceiling fan clamp complete all as specified and as directed.

Supply only top and bottom canopy of plastic with steel screw suitable for rod for fan of 1200/ 1400mm sweep complete all as specified and as directed.

Supply only capacitor 2.5 MFD including necessary connection complete all as specified and as directed. Make : Usha/ Epcos/ Havells/Bajaj

Supply only capacitor 3.15 MFD including necessary connection complete all as specified and as directed. Make : Usha/ Epcos/ Havells/ Bajaj

Taking down Exhaust fans, any make and size, removing electrical connection, and re-fixing after , testing and hanging in position complete all as specified and as directed. Note:- Spare parts shall be measured & paid separately.

M&L for complete Repair and maintenance of unserviceable exhaust fan of any sweep at work shop, incl dismantling complete the parts i.e. blades, fan cover, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, connecting wire, PVC connectorand greasing/oiling etc assembling, cleaning and testing of exhaust fan as directed. Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Writing of MES Nos and painting of ceiling fan shall be measured & paid separately uner relevant item of Sch 'A'. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge & contractor. (v) Cost of minor part i.e. Cotterr pin, PVC connector, screws shall be deemed to included in the cost of quoted rate.

M&L for rewinding stator of exhaust fan 300mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and as directed

M&L for rewinding stator of exhaust fan 380mm to 450mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and as directed

M&L for painting one coat of synthetic enamel paint as approved by deptt using spray machine painting on the surface ofexhaust fan of 1200/ 1400mm sweep complete after preparation of surface i.e cleaning, washing of surfaces filling cavities with filler, cleaning dust and dirt all as specified and as directed by Engr-in-Charge

Supply and fixing in replacment thermostat for Geyser of capacity 35 Ltr/25 Ltr/15 Ltrs in position complete all as specified

S&F in replacement PVC connection hot and cold water pipe 18" long, 15mm outer dia with brass nut and washer, both side complete all as directed by Engineer-in-Charge.

Supply & fixing in replacement geyser inner water tank S/S suitable for Geyser Capacity 35 Ltrs as per existing shape and type complete all as specified & directed.

Supply & fixing in replacement geyser inner water tank S/S suitable for Geyser Capacity 15/25 Ltrs as per existing shape and type complete all as specified & directed.

M&L for taking down unserviceable geyser of capacity 15/25 litre storage type, disconnecting necessary connection for repairing including re-fixing the same after repair & reconnection & testing as directed. Note :Thermostat switch, Geyser assembly, Geyser elements, bottom cover etc. if replaced shall be measured and paid separately under respective items.

M&L for taking down unserviceable geyser of capacity 35 litre storage type, disconnecting necessary connection for repairing including re-fixing the same after repair & reconnection & testing as directed. Note :Thermostat switch, Geyser assembly, Geyser elements, bottom cover etc. if replaced shall be measured and paid separately under respective items.

Supply and fix in replacement Geysers assembly of stainless steel along with PVC rubber washer suitable for Geyser of Capacity 15 litres any make as required including taking out the old unserviceable assembly from the geysers complete all as specified and as directed.

Supply and fix in replacement Geysers assembly of stainless steel along with PVC rubber washer suitable for Geyser of Capacity 25/35 litres any make as required including taking out the old unserviceable assembly from the geysers complete all as specified and as directed.

Supply and fix in replacement heating element 2000 watts of suitable shape/size (cup type/traingle type/Threaded type) with PVC/ rubber washer & clamp in position including taking out the old unserviceable heating element from the geysers complete all as specified and as directed. Make: Thermo king/Theeta/Daspass/ Lazer.

Supply and fix in replacement Neon lamp indicator red/green colour of circular/rectangular shape as suitable and as per sample including taking out the old unserviceable lamps from the geysers complete all as specified and as directed.

Supply and fix in replacement non-return valve/ safety valve 15mm dia of brass including taking out the old unserviceable valve from the geysers complete all as specified and as directed.

Supply and fix in replacement top plug, 3 Pin, 15 Amps including taking down old unserviceable top plug complete all as specified.Make : Havells/ SSK/ Anchor

Supply and fixing in replacement; 3 core flexible copper conductor cable of size 2.5 Sq.mm ISI marked including taking out the old unserviceable cable complete all as specified and as directed.

Supply and fixing aluminium service cable PVC insulated flat or circular of size 10 Sqmm 2 Core complete all as specified and as directed.

Supply and fixing modular white cover plate assy complete matching to existing shape and size of 2 module all as specified and as directed.

Supply and fixing modular white cover plate assy complete matching to existing shape and size of 3 module all as specified and as directed.

Supply and fixing modular white cover plate assy complete matching to existing shape and size of 6 module all as specified and as directed.

Supply and fixing modular white cover plate assy complete matching to existing shape and size of 8 module all as specified and as directed.

Supply and fixing modular white cover plate assy complete matching to existing shape and size of 12 module all as specified and as directed.

Supply and fixing sunken sheet metal box 2 module suitable for modular fittings matching to existing cover plate complete all as specified and as directed.

Supply and fixing sunken sheet metal box 3 module suitable for modular fittings matching to existing cover plate complete all as specified and as directed.

Supply and fixing sunken sheet metal box 6 module suitable for modular fittings matching to existing cover plate complete all as specified and as directed.

Supply and fixing sunken sheet metal box 8 module suitable for modular fittings matching to existing cover plate complete all as specified and as directed.

Supply and fixing sunken sheet metal box 12 module suitable for modular fittings matching to existing cover plate complete all as specified and as directed.

M&L for capillary thermostat 2 terminal for geyser 15/25/35 watt complete as per existing type complete all as specifed and as directed.

M&L for PVC FRLS insulated copper conductor 1.5 Sqmm through existing conduit complete all as specified and as directed.

M&L for PVC FRLS insulated copper conductor 2.5 Sqmm through existing conduit complete all as specified and as directed.

M&L for PVC FRLS insulated copper conductor 4 Sqmm through existing conduit complete all as specified and as directed.

M&L for PVC FRLS insulated copper conductor 6 Sqmm through existing conduit complete all as specified and as directed.

M&L for PVC FRLS insulated copper conductor 10 Sqmm through existing conduit complete all as specified and as directed.

M&L in repairs for exhaust fan 300 mm sweep complete with jaali all as specified and as directed. Make:- Bajaj/ Crompton/ Usha/ Orient

M&L for louvers for exhaust fan 300 mm sweep complete made ofCRCA powder coated sheet frame and aluminium sheet/GI sheet flappers of suitable thickness complete all as specified and as directed. Make SRV Electricals or equivalent or as specified

M&L for casing/ caping 25mm complete with fixing arrangement all as directed.

M&L for LED tube light fitting batten 18 watt or next higher capacity having lumen efficacy min 100 lumen/ watt complete all as specified and as directed, Make:- Bajaj/ Crompton/ Philips

Supply and Installation of Smart Single Phase Meter with the following specifications: (i) AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt GPRS communication as required/ directed by Department with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED based circuitry. (ii) Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand (iii) Meter should have connect / disconnect functionality operatable from prepaid billing software. (iv) Meter load limit should be settable remotely from the software. (v) The meter should support communication as per IS 15959 (Part 2) 2011. (vi) Meter shall detect First Breath (Power on) and Last gasp (Power Off) condition and communicaton to the software. (vii) The meter should support open communication protocol DLMS with the software. (viii) The system should be able to run in Prepaid or postpaid billing mode as and when required based on defined processes by the department.

Supply and Installation of Smart Three Phase Meter with the following specifications: (i) AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 415 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt GPRS communication as required/ directed by Department with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED based circuitry. (ii) Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand (iii) Meter should have connect / disconnect functionality operatable from prepaid billing software. (iv) Meter load limit should be settable remotely from the software. (v) The meter should support communication as per IS 15959 (Part 2) 2011. (vi) Meter shall detect First Breath (Power on) and Last gasp (Power Off) condition and communicaton to the software. (vii) The meter should support open communication protocol DLMS with the software. (viii) The system should be able to run in Prepaid or postpaid billing mode as and when required based on defined processes by the department.

M&L for ceiling fan 1200mm sweep, 5 star rated complete. Make:- Bajaj/ Crompton/ Usha

Supply & fixing Aesthetically designed LED batten having extruded Aluminium housing with Microwave motion sensor technology for energy efficiency to work on motion lighting fixutre of 20 watt having Item code Model LUMILINE SMART Batten, order code LUMILINESMART20WLED865PCWH of Havells or equivalent in specified makes complete all as specified & directed by Engineer-in- charge.

AGGARWAL ENGINEERING CO (BID ID -3134929)

FRIENDS ENGINEERS (BID ID -3119789)

M/s GURFATEH BUILDERS (BID ID -3127032)