Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST AND REASONALBE | |
| 2 | L2₹11.8 L+₹45,414.75 (4.00%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹13.7 L
EMD Value
₹27,400
Closing Date
9 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JAIPUR
Military Engineer Services, HQ Commander Works Engineer, Kalyan Marg, Banipark, Jaipur-06
PROVN OF TECH OFFICE FOR KSP UNDER ZONE -I AREA AT JAIPUR MIL STN
2023_MES_609031_1
CWE/JPR/82250/E8
Open Tender
Civil Works
Item Rate
180 days
JAIPUR
As per NIT
8 documents required · 8 mandatory
₹500
GE JAIPUR
₹27,400
Yes
24 Aug 2023
14 Jul 2023
11 Aug 2023
14 Jul 2023
9 Aug 2023
27 Jul 2023
14 Jul 2023 - 26 Jul 2023
Amount
Excavating in trenches , n exc 1.5 m wide and n exc 1.5 m depth for foundation etc. Or for shafts , wells manholes, pier holes etc. N exc 10 sqm on plan and getting out Soft/loose soil etc complete all as specified and as directed.
Excavating in trenches , n. exc 1.5 m wide and exc 1.5 m depth but n exc 3.00 for foundation etc. Or for shafts , wells manholes, pier holes etc. N exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.
M&L for Surface dressing in soft / loose soil avg depth not exc 15 cm deep complete all as specified and as directed.
M&L Returning, filling in,including spreading, levelling , watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.
Sand filling under floors or foundation including spreading , levelling watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
M&L for hardcore of broken stone or boulders , gauge not 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 in foundations, fillings and mass-concrete, sub base of floor complete all as specified and as directed.
M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in with 1:6 cement mortar complete all as specified and as directed.
M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in foundations, including rafts, footings, foundation beam , plinth beams, bases of columns etc. Basement slabs , under reamed piles and mass concrete complete all as specified and as directed.
M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in beams, cantilevers, lintels over 1.5m span complete all as specified and as directed.
M&L RCC M-25 (Design Mix) slab supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L RCC M-25 (Design Mix) Columns, pillars, piers, posts and struts for complete all as specified and as directed.
M&L for rough finish formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work: vertical or to better for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for rough finished formwork to sides and soffits of floor or rooof beams, beam haunching, girder s , lintels, cantilevers, shelves including supports, overhangs etc.for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for rough finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work : not exceeding 200m thick (horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and as directed.
M&L for rough finished formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and as directed.
M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.
M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item no 19 above but 6mm to 8mm dia as in stirrups complete all as specified and as directed.
M&L screed bed or bedding layer or mortar 15mm thick over roof finishes in CM 1:4 with WPC finished even and smooth w/o using extra cement complete all as specified and as directed.
M&L for applied a coat of bituminious primer confirming to [email protected] Kg per Sqm ,APP BASED POLYMERIC Memberane not less than 3 mm thick. Weighing not less than 3 Kg/m2, reinforcd with polyster non woven febric(weighing not less than 15 Gm/Sqm) and upperside of memberane thermally insulated uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application complete all as specified and as directed.
M&L preparing new surfaces APP based polymeric membrane roof top exc 10cm width or girth and applying two coats of aluminium paint complete all as specified and as directed.
Supply only integral waterproofing compound ISI marked complete all as specified and as directed.
M & L Rendering 10 mm thick cement plaster in CM 1:6 on fair faces of brick work (Internal Surface) including finished even and smooth without using extra cement complete all as specified and as directed.
M & L Rendering 15 mm thick cement plaster in CM 1:4 on other faces on brick masonry (External surface) complete all as specified and as directed.
Rendering 5mm thick cement plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L 3mm thick wall care putty on wall complete all as specified and directed by Eng - in - Charge and approved by the GE.
M&L 3mm thick wall care putty on ceiling complete all as specified and directed by Eng - in - Charge and approved by the GE.
M&L preparation of new plastered surfaces of walls, and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed.
M&L preparation of new plastered surfaces of ceiling, and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed.
M &L for preparation of new plastered surfaces of walls , AC sheet, soffits of chajjah of any description and at any position and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @0.90 litre/ 10 Sqm over new surfaces as required all as specified and as directed
M&L for 50 mm thick plain cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base finished even and fair complete all as specified and as directed.
M&L for 30 mm thick Cement Concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) below tiling complete all as specified and as directed
M&L Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles n. exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in cement mortar 1:4 complete all as specified and as directed.
Ditto as item no 35 above but in skirting
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.
M&L 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. The shutter shall be fitted to chowkhats complete all as specified and as directed.
S&F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I. The shutter shall be fitted to chowkhats complete all as specified and as directed.
Framed work as in doors or gates of angle or other section as chowkhat., tie bar, hold fast, guard bars complete, drilled for fixing complete conforming to FE 290 Gde-16 complete all as specified and as directed.
S&F 300 mm long brass sliding door bolt with hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed (ISI Marked) complete all as specified and directed by Eng - in - Charge
S&F 150 mm long brass barrel tower bolts of with cast or sheet barrel and rolled or cast bolts and fixed (ISI Marked) complete all as specified and directed by Eng - in - Charge.
S&F 150 mm extruded brass handles, fabricated type polished (ISI Marked) complete all as specified and directed by Eng - in - Charge
S&F 100 mm long butt hinge cast brass with stainless steel hinge pin heavy weight and fixed to wooden or PVC frame fixed in repairs by staijnless steel screw complete all as specified and directed by Eng - in - Charge.
S&F aluminum door closer hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg complete all as specified and directed by Eng - in - Charge
M&L for two coat synthetic enamel paint on wooden surfaces any description over witdh or girth, over a coat of pink primer including preparation of new surfaces all as specified and as directed
M&L 50 mm thick plain cement concrete type C-1 1:3:6 (Using 20 mm graded stone aggergates ) as in plinth protectionsfinished even and fair with joints 10 mm wide and in full depth at corners and @ 3 m c/c filled with mastic mortar complete all as specified and as directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed.
M&L cement concrete 1:4:8 tyep D2 100 mm thick as in flooring complete all as specified and as directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, laid with grey cement and pigment complete all as specified and as directed except tiles.
M&L 100 mm Thick PCC 1:2:4 type B0 under floor tiles complete all as specified and as directed.
S&F Rolled MS in joist channel angle or tee section fixed independently without connecting plates etc( cut to ordinary lengths ie ,with in 20 mmof length indicated with Fe 410.0 or Fe-250 complete all as speciafied and as directed.
S & F Plates (plain or chequered) channels, square cut or notched(ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed.
S&F galvatume aluminium zinc coating (PPGL) corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.
M&L applying two coat synthetic enamel paints over a coat of red oxide zinc chrome primer on new steel surfaces including preparation of all as specified and as directed
M & L Bricks for protection cover to under ground cable (with old size sub class ‘B’ bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10mm as directed by Engineer-in-Charge.
M & L Sand cushioning to PVC under ground cable with Tibba sand and punning to provide a required cover.
M&L for boring of existing road/path for laying of GI pipe protection for UG cable including making good distrurbed area/surface all as specified and directed.
Supply & fixing or laying galvanised steel tubing light grade (ISI marked) for protection of under ground cable on poles / walls under road crossing etc of following sizes including dismantling & taking down existing pipe :-(a) 50 mm bore
Supply, Laying, Jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC bedded, galvanised steel strips or wire armoured, heavy duty with multi stranded aluminium conductor, 1100 volts grade (ISI marked) laid in trenches, ducts, pipes or fixed on pole etc incliuding taking down of following size :-(a) 25 Sqmm, 3½ core cable
Supply & fix LT panel out door (Kiosk type) type, weather & vermin proof MS sheet housing 3.15mm thick, powder coated over a coat of primer, double door, front & rear openable type, mounted on 40x40x6 mm angle iron frame, floor mounted type with one MCCB, 4 pole, 63 Amp, 25 KA 415 volts as incomer and , copper bus bar 200 Amp of length not less than 60 cm, 4 pole duly drilled with holes for cable connections, after due approval of panel drawing including PCC pedestals of suitable size, complete all as specified and directed by Engr-in-charge.
Deep Construction Company
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .