SPL REPAIR OF HARD STANDING AND GUARD REST ROOM AT NORTH COLONY UNDER GE (WEST) PATHANKOT

Amount

M&L for Cutting out cracks to V-section of size 12mm x 25mm in existing concrete surface (by mechanically or manually as per ground condition) and cleaning out and filling solidly with a hot mixture of bitumen VG-30 and clean dry sand 1: 1 (by weight), complete, all as specified and as directed by the Engineer-in-Charge.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc Brushing neat cement slurry with 3.0kg of cement per sq. metre as dirrected Engr-in-charge.

M&L for 80mm thick granolithic concrete 1:1:2 (confirming with IS:-5491-1969 (reaffirmed 2001)) in floor topping laid in panels of requisite sizes over existing cement concrete sub floors etc. and finished to an even and fair surface complete all as specified and directed by Engr-in-Charge.

M&L for 20mm thick wearproof topping as directed by GE, mixing with metallic floor hardener as per manufacturer instruction, laid on concrete floors and pavings in panel, and finished even and smooth, complete all as specified and as directed by Engg-in-Charge NOTE: - (Metallic floor hardener shall be measured & paid separately under respective item)

M&L for Glass dividing strips, 5 mm thick and 45mm wide inserted in position as per approved design, complete all as specified and directed by Engineer-in-Charge.

Supply only approved metallic floor hardener all as specified.

M& L for preparing concrete surface of any description over 10 cm girth or width of new or previously untreated surfaces and applying 2 coats of Synthetic enamel paint over a coat of priming paints plaster coat complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded crushed stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified.

Surface excavation not exceeding 30 cm deep and average 15cm deep and getting out in soft / loose soil, complete all as specified.

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L for 25 mm thick, sand for filling under floors, spreading and levelling in layers 25 mm thick including watering and consolidation complete all as specified and as directed.

M&L for 80 mm thick Machine pressed precast concrete interlocking paver block (glossy finish with red & yellow in colour) with grey cement and no pigment of shape and size as approved by GE confirming to IS 15658-2006, M-40 Grade complete all as specified and directed.

M&L for 150mm bore RCC pipe (ISI marked) class NP-3 laid and jointed in cement mortar with collars, laid in trenches at any depth and tested, complete all as specified and directed. (Note:-excavation earth work & concrete shall be paid separately).

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for pipes of 150mm bore, complete all as specified and directed.

Extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms,moulds, mitered/stopped etc complete all as specified and as directed. (Note: Inner girth shall only be measured)

All as per srl item No. 15 here-in-before but Add to or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement including forms, moulds, mitered/stopped etc., complete all as specified and as directed.

M&L for Providing precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in precast cover slab (for manhole etc incl all use of forms, mould or machine moulds and setting the blocks, slabs etc in cement mortar 1:4, complete all as specified and directed.

M&L for 20 user LLDPE septic tank designed to carry sewage and sluge water including earth work and PCC foundation 1:4:8 of appropriate size, vent shaft, and connection complete all as specified and directed by Engr-in-Charge.

M&L for construction of soakage well (drawing CEPZ/C-TD/013/13 for refrance) of size 1.8mx3mdeep, including earth work in any type of soil, PCC foundation 1:3:6, old size burnt clay brick work for honey combed masonry in cement mortar 1:4 with top ring of M-25 concrete, including intercepting chamber and screen chambermade of brick masonary in CM 1:4, M-25 RCC cover slab, interlocking pipes of RCC/DWC complete all as specified and as directed by Engg-in-Charge.

Demolition of brick work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed.

Demolition of Roofs, floors (other than ground floors), beams, staircases, chajjas, column, pillar & similar work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed.Note:- Demolition will be done only by mechanical cutter only .

Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed .

Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the freme) complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site.

Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1. 5 metre in depth; for foundation or for manholes not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed by the Engineer-in-Charge.

Excavating for each additional 1.5 m or part there of in depth beyond the first 1.5 m and getting out in Soft & loose soil complete all as specified and as directed.

Treating the bottom and sides of excavation with ANTI-TERMITE TREATMENT @5 litres of emulsion per square metre of surface area complete all as specified and as directed.

Treating the top surface of filled earth with ANTI-TERMITE TREATMENT @5 litres of emulsion per square metre of surface ( Floor ) complete all as specified and as directed.

Treating the soil under plinth protection with ANTI-TERMITE TREATMENT @5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling or mass concrete as specified and directed

Returning, Filling in, including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where as directed

M&L for MS TMT bars of Grade Fe 500d, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

All as per srl item No. 36 here-in-before but 5 to 10mm dia in stirrups, spacers & binders etc complete complete all as specified and directed.

M&L for RCC, M-25 (Design Mix) using 20mm graded crushed stone aggregate for Foundations, Including rafts, footings, foundation beams; plinth beams, bases for columns, etc and Mass Concrete complete all as specified and directed.

Use & Waste Form work for rough finished surfaces of concrete measured flat for Foundations, Including rafts, footings, foundation beams; plinth beams, bases for columns complete all as specified and directed.

M&L for RCC, M-25 (Design Mix) using 20mm graded crushed stone aggregate for Columns, pillars etc complete all as specified and directed.

Use & Waste Form work for rough finished surfaces of concrete measured flat for Column finished fair flat surfaces complete all as specified and directed.

M&L for RCC, M-25(Design Mix) using 20mm graded crushed stone aggregate for beams, lintels, lintel Bands complete all as specified and directed.

Use & Waste Form work for rough finished surfaces of concrete measured flat for beams, lintels, lintel bands complete all as specified and directed.

M&L for RCC, M-25(Design Mix) using 20mm graded crushed stone aggregate for Chajja complete all as specified and directed.

Use & Waste Form work for rough finished surfaces of concrete measured flat for Chajja complete all as specified and directed.

M&L for RCC, M-25(Design Mix) using 20mm graded crushed stone aggregate for roof Slab complete all as specified and directed.

Use & Waste Form work for fair finished surfaces of concrete measured flat Floor Slab,roof slab etc complete all as specified and directed.

Use & Waste Form work for edges of concrete flat n. exc 200 mm thick, complete all as specified and directed.

M&L for Brickwork with sub-class ‘B’(old size) burnt clay bricks straight or curved on plan exc 6 metre mean radius built in CM 1:4, complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for Brickwork in half brick thick wall with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M&L for Damp proof course in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces with integral water proofing compound, including necessary form work complete all as specified and directed.

M&L for Rendring 15mm thick in cement mortar 1:6 on any faces of brick or concrete surfaces finished even and smooth without using extra cement

M&L for Rendring 15mm thick in cement mortar 1:4 mixing with water poofing compound on fair faces of brick or concrete surfaces finished even and smooth without using extra cement (Note:-WPC shall be measured and paid seperately under respective item)

M&L for rendering 5mm thick in CM 1:3 on ceiling surfaces, etc finished even and smooth without using extra cement, complete all as specified and directed.

Supply only Integral waterproofing compound

M&L for 15mm thck Screed layer in CM(1:4) for laying roof membrane with water poofing compound complete all as specified and directed. ( Note:WPC shall be measured and paid seperately under respective item)

M&L for cleaning of plastered/ concrete surfaces and applying roof treatment on top of roof with APP based polymeric membrane, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) (centre core) with thermal insulation, minimum weight not less than 3.5 kg/sqm and thickness not less than 3mm, laid by torch application method with overlap 100mm on length side and 100mm on the width side as per manufacturer instructions over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 0.30 litre/ Sqm complete all as specified & directed

M&L for Prepration of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation new plastered surfaces of walls and applying one coat of Birla/JK wall care putty and applying two coats of Oil bound distemper complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three Coats of White Wash, complete all as specified and directed.

M&L for preparation new surfaces steel and applying two coats of synthetic enamle paint over a coat of Zinc Cromate primer complete all as specified and directed.

M&L for preparation new surfaces of wood and applying two coats of synthetic enamle paint over a coat of white/ pink primer over prepared surface of wood complete all as specified and directed.

S&F 125mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed omplete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats Note: wire cloth shall be measured separately

M&L for block board 18/19 mm thick , grade 2 quality, interior grade, commercial type as in cupboard shelves, shutters, cabinets, etc complete all as specified and directed.

M&L for decorative laminates 0.9 mm thick type I, or surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Continuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed

S&F 100mm long hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate with screws, complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel rings with 50 mm dia and proportionate for part there off, with stainless steel brackets near to ends with stainless steel finish for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)

S&F steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing (glass of plain or figured type as required) , guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over a coat of red oxide primer all as per drg No CEPZ/ TD/245/01 Sheet 1/1 and CEPZ/TD-246/01 sheet No 1/2 & 2/2 including taking down old window complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

S&F 100mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed

S&F 200 mm long 10 mm dia aluminium tower bolt complete all as specified and directed.

S&F Aluminium anodized handle handles 150mm long

S&F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) & fixing clips of sheet, cast and extruded section & fixing bolt & sliding bolt of extruded section of size 250mm long complete all as specified and directed.

S&F MS helical door spring 150mm size, complete all as specified and directed.

M&L for mild steel work such as Bands, Straps, Hold fast, Clamps, Hooks & similar confirming with Fe-410-O or Fe-310-O.

M&L for Hardcore of guage n exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 20mm graded crushed stone aggregate as in foundation, filling and mass concrete bed of manholes, complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping, bed blocks, benching and like incl necessary formwork, complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in surface channels, drains, complete all as specified and as directed.

M&L for 75mm thick Plinth Protection, PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base even and rough finish complete all as specified and as directed.

M&L for 100 mm thick Cement concrete type D-2, 1 : 4 : 8 (using 40mm graded crushed stone aggregate) as in sub floors/sub bases etc. complete all as specified and as directed.

M&L for 25mm thick Cement concrete, type B-0, 1:2:4 (using 20mm graded crushed stone aggregate) as in sub floors/sub bases etc. complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with & incl 15 mm CM 1:4 screed bed complete all as directed by engr-in-charge

M&L for Glazed ceramic glossy digital tiles in vertical surface 450X 350X 7mm thick colored as in dado/ skirting and vertical surfaces set & jointed in neat cement slurry and pointed in colored cement to match the Shade, pattern, laying etc of tiles, over and incl 10 mm thick cement mortar 1:4 backing layer complete all as directed

S&F Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed.

M&L for 20mm thick Granite (of approveed colour) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 15mm thick CM 1:4 screed or backing layer complete all as specified and as directed

M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement complete al as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

S&F tube medium grade galvanized with all fittings and fixed to walls or laid in floors of 15mm bore including cutting chasing in walls etc if required complete all as specified and directed.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore including cutting chasing in walls etc if required complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Bore dia of pipe 20 mm

S&F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and cup screwed down , high pressure for iron pipe complete all as spd & directed.

S&F in repair CP stop cock/angle valve cast copper alloy screwed down high pressure ,with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm bore complete all as specified & directed Make: Parryware,Jaquar,Prayag

S&F in repair stop valves (ISI marked), 15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S&F in repairs Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed

S&F in repairs Swan neck CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan including P or S trap of bore 110/125 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied .

S&F in repairs Vitreous China table top wash basin white size 500x420x190 mm, excluding taps, waste, chain and plug and orcelain stopper but including brackets Make Jaquor, cera etc

S&F in repairs Vitreous China urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) Make Jaquor, cera etc

S&F vitreous china Urinal partition white of size 310x700mm

S&F 110mm PVC (SWR) WC connector bent type complete all as specified and directed.

S&F Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/ 40mm-60 gms)

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cSqm fixed complete to walls, ceilings or in Floors etc., any type of pipe 32/40 mm dia

S&F in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.

S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes.

S&F in repairs Soap dish, stainless steel , min weight 300gm fixed to wall complete all as specified and directed

Dismantling of old brocken water tanks of cap 1000 ltr and removing to store complete all as specified and as directed.

S&F 1000 Ltr cap Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including fitting such as nipple, check nut etc. all as specified

S&F 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm

S&F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends of radius 110mm complete all as specified and directed.

S&F PVC (SWR) bends of radius 110mm with access door complete all as specified and directed

S&F 110 mm PVC (SWR) junction single ( SingleTee) equal or unequal complete all as specified and directed

S&F PVC (SWR) 110mm bore vent cowl, complete all as specified and directed

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) bends of radius 75mm complete all as specified and directed.

S&F PVC (SWR) bends of radius 75mm with access door complete all as specified.

S&F 75 mm PVC (SWR) branch pieces (Tee) with cement joint complete all as specified and directed

M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 110mm complete all as specified and directed

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent complete all as specified and directed cement complete all as specified and directed.

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing/cooler stand including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

M&L for modular point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC rigid concealed conduit heavy duty suitable size with all accessories having thickness not less than 1.8 mm including modular matallic flush box of suitable way with modular cover plate for modular switches and sockets , including green 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.

All as per Srl item No. 139 here-in-before but modular call bell point complete all as specified and directed.

All as per Srl item No. 139 here-in-before but modular 3 pin 5 Amps socket outlet on the same board with other switch complete all as specified and directed.

All as per Srl item No. 139 here-in-before but modular 3 pin 5 Amps socket outlet on the independent board with other switch complete all as specified and directed.

All as per Srl item No. 139 here-in-before but modular 15/16 Amps socket outlet on the independent board with 2.5 Sqmm copper conductor FRLS cable and 2.5 Sqmm PVC insulated unsheathed copper conductor cable FRLS (green colour) as earth lead complete all as specified and directed.

M&L for modular point wiring with 4 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC rigid concealed conduit heavy duty suitable size with all accessories having thickness not less than 1.8 mm including modular matallic flush box of suitable way with modular cover plate for modular switches and sockets , including green 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.

S & F of Bell Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge.

S&F Modular switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S & F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Bell push 6A 1 module , complete all as specified and directed.

S & F Modular Fan regulator 6A 1 module , complete all as specified and directed.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S & F energy saving decorative 22W LED tube light box type, light fitting extruded PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired without tube and making connections with flexible copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge.

S&F sleek LED mirror light fitting 2 feet long 1x10 W including inbuilt ind driver complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed.

S & F in replacement LED decorative wall light fixture made up of polycarbonate globe shape suitable for retrofit B22 base with IP-66 protection including 12 W LED Lamp complete all as specified and directed.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing MS ventilating fans Single phase, 230 volts 300 mm or 12” H.D EX Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller PVC type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

S & F in replacement bldg secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length not less than 1.2 mtr fixing with clamp etc and making connections using suitable size copper cable from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

S & F in replacement of existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps 'C' curve complete all as specified and directed .

S & F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB FOUR POLE 63 AMPS AC 415 VOLTS 16 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing. ( (i) MCCB, MCB and DB should be of same make. (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).

S&F & testing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connecting with flexible copper conductor of suitable size, 3 core and including writing of MES No with black paint complete all as specified and as directed.

Supply, laying and testing LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 25 sq. mm 4 core complete all as specified

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified (Note:-Punned thickness shall be measured and paid)

M&L for brick covering equal to length of bricks as mechanical protection to cable with well burnet sub class ‘B’ bricks laid as directed by the Engr-in-Charge.

S&F GI tubing light grade 50 mm bore for cable protection laid in trenches in road crossing or fixed to wall/Pole including fittings /clamp complete all as specified and directed.

S&F 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes 25 mm dia, SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches, floor, along with wall/ceilling etc. including required fittings such as bend, clamps, nuts bolts and washers etc., complete all as specified and as directed.

S&F 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M&L for cutting/drilling of GI pipe upto 100mm dia for connecting of 25/50mm GI pipe including all required accessories complete all as specified and as directed.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 42,343.00 and any other reduction if any from quoted amount.

M/S S KUMAR & CO (BID ID -3302880)

DABGOTRA BUILDERS (BID ID -3308399)

GANDOTRA CONSTRUCTION CO (BID ID -3303126)