Narayani and Adjoining villages Rural pipe Water Supply Scheme under D.W. and S. Division Godda on turnkey basis.

Amount

WATER TREATMENT PLANT

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and necessary equipment for designing & construction of Conventional WTP of 3.60 MLD capacity. With all complete job. (Please refer to Section 5,Sl. 2.3 of SBD)

Elevated Service Reservoir

960000 liter capacity and 24 M stageing.

Intake Well With Pump House 5.0M dia

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand construction of R.C.C Intake well with Pump house all complete job. (Please refer to Section 5,Sl. 2.1 of SBD)

Excavation in Ordinary soil Earth work in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per design section in all kinds of soil including moorum soil, soil mixed with kankar, pebbles and boulders up to 300mm size and disposal of the same (beyond 50m away from the edge of the trenches) with initial lead of 150m and lift mentioned below as per specification and direction of E/I.

0 to 1.5m lift

1.5 to 2.5m lift

2.5 to 3.5 m lift

Excavation in Ordinary soft rock or soft soil Earth work in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per design section in all kinds of ordinary rock or soft rock (Vide classification of soil item-C) with disposal of soil ( beyond 50m from the edge of trenches ) with initial lead of 150m and lift mentioned below as per specification and direction of E/I. (Soft Rock where blasting is required and approved by the concerned Chief Engineer)

3.5 to 4.5m lift

4.5 to 5.5m lift

5.5 to 6.5m lift

6.5 to 7.5m lift

Providing PCC M100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade -III (50mm to 25mm Size) clean coarse sand of FM 2.5 to 3 including screening, shuttering , mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer-In-charge.

Providins and laying PCC or RCC M-300 with nominal mix of in various components of Dam foundation with approved quality of 40 mm graded coarse aggregate of required grade as per design and approved quality of sand of requisite F.M. (2.5 to 3.0) washed and screened excluding cost of shuttering or form work as well as reinforcement ,its cutting ,bending ,binding and placing but including necessary tools and plants and vibratng ,curing,royalty all taxes etc .complete job as per specification and direction of E/I. Foundation And Vertical Wall

Providing RCC M 250 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone metal grade -III (20mm to 6mm Size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, but excluding the cost of reinforce ment, taxes and royalty all complete as per building specification and direction of Engineer-In-charge. Slabs / Landings / Vertical Walls / Waist Slabs / Steps for Staircase

Providing RCC M 250 with nominal mix of in beam and column with approved quality of stone metal grade -III (20mm to 6mm Size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, but excluding the cost of reinforce ment, taxes and royalty all complete as per building specification and direction of Engineer-In-charge.

COLUMN

Providing RCC M 200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone ship (20mm to 6mm Size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, but excluding the cost of reinforce ment, taxes and royalty all complete as per building specification and direction of Engineer-In-charge. (CHAJJA/LINTEL)

Providing Tor steel reinforcement of 10mm, 12mm & 16mm dia, bars as per approved design and drawing excluding carriage of M.S.bars to work site, cutting, bending and including with annealed wire with cost of wire, removal of rust ,placing the rods in position all complete as per building specification and direction of E/I. (TMT coil Fe 500)(only valid for Sail & Tata Steel)

Providing designation 75A Brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of FM 2 to 2.5 including providing10mm thick mortar joints, costs of screening, materials, scaffolding, racking out joints to 15 mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

providing 12mm cement plaster (1:4) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. INTERNAL PALSTER

Providing 12mm plaster (1:4) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. EXTERNAL PALSTER

WATER PROOF CEMENT PLASTER Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of FM 1.5 with 5% cico or any other water proofing compound including screening curing, with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification & direction of E/I. ) For pump room top slab

SNOWCEM TO EXTERIOR SURFACE Providing two coats of Snowcem of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with sand paper scaffolding, curing and taxes all complete as per the building specification and direction of E/I.

OIL BOUND DISTEMPER Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floor and taxes all complete as per the building specification and direction of E/I.

R.S.Joist ISMB Providing Structural steel work in single stanchioned composed of RSJ, Channel, etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer- in charge.

G.I. PIPE RAILING Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 M c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete.

DEWATERING Dewatering the excavated trenches & pools of water in the building trenches/ pipeline trenches, well works by using pumps & other devices including disposing off water to safe distance as directed by Engineering- in- Charge ( including cost of machinery, labour, fuel), etc. all Complete.

ROLLING SHUTTER Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. racket plate 300 x 300 x3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (With echanical gear)

Steel glass window Supplying, fitting and fixing fully glazed steel door, windows or ventilation of standard rolled ‘Z; and mullion steel section and size as per is-1038 joints met and weeded with 100x16x3mm S-S- Lug fixed in cement concrete (1:2:4) block 15x10x10 cm, size including cost of oxidized iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with aluminum beads and inner, farm fixed with lugs with 20mm long 6-3 mm G-I- counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all story’s an taxes all complete as per building specification and direction of E/I

VENTILATOR Providing and fixing in position anodised (as per IS 1868/1982) Aluminum fixed staggered ( Z Type )Ventilator with aluminum rectangular pipe 63 mm x 38.10 mm x 1.22 mm at weight 0.650 Kg/Rmt, Aluminum angle of size 15 mm x 15 mm x 1 mm, aluminum channel of 9 mm sizes, S.S. mosquito net of 304 Grade, 4 mm thick float glass per detailed drawing & as directed by Engineer in charge etc. Complete. Spec. No.: As directed by Engineer In charge.

CEMENT CONCRETE FLOORING Providing 50mm thick cement concrete flooring (1:2:4) with 20mm to 6mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing finishing the surface smooth by rubbing with carborandum stone , taxes and royalty with all complete as per building specification.

CHEQUERED PLATES Providing and fixing M.S. chequered plates flooring of following thickness supported on M.S. angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plates to the required square or rounding shape, making holes in the plates, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer -in- charge. 8 mm thick

LIGHTENING CONDUCTOR Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia upper terminal 1.5 m long with a knob at end and with a conical spike at top, copper tape conductor 20 x 3 mm size ,copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 m centre to centre including necessary excavation, laying and fixing the conductor, providing and fixing 40 mm G.I. pipe up to 3 m height from ground and 0.5 m below ground including making all connections, filling the earthling pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevant I.S. codes.

Extra Length

M S LADDER Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm & painting the ladder complete.

REFILLING TRENCHES Earth work filling foundation trenches or back filling of masonry structure with pervious soil in layer not exceeding 150mm thick well watered , rammed and fully compacted and finally dressed with earth obtained from borrow pits beyond 150m lead but upto 1/2Km with all lifts and carriage by truck including, loading unloading, spreading , construction, and maintenance of haul road etc. as per specification and direction of E/I.

PVC PIPE FOR WIPE HOLE Providing supplying in standard lengths ISI mark rigid unplastisied PVC pipes suitable for portable water with solvent cement joints including cost of couplers as per IS specification 4985/1988 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental store or site and staking the same the same in closed shed duly protected from sun rays and rain including cost of jointing material etc. complete. with ED 110mm.

CHAMBER FRAME AND COVER Providing and fixing in position steel fibre reinforced concrete (S.F.R.C.) frame and covers of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity).

MS SPECIALS Providing and supplying ISI standard MS special of required thickness with 3 coats of approved make epoxy paint (Shaimar,Ciba or Mahindra &Mahindra make) from inside and out side including all taxes ( central and Local) , octri, inspection charges, transportation to store / site and stacking, etc. complete.

ROSE PIECES Providing and fixing in position MS rose pieces in intake wells including cost of all materials and labour, painting with three coats of anti corrosive oil paint or food grade Epoxy paint etc. complete as directed by E/I. All Rose pieces should be perforated having 25mm dia hole 50mm centre to centre. Perforations should not be less than 55% of surface area.

COFFER DAM Providing, Constructing Coffer Dam in river basin/dam storages as per type design including excavation, filling the middle portion with B.C. soil (in gunny bags if required). Providing impervious /semi pervious materials on both sides of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engineer-in-charge till the completion of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge.

Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading ,unloading transportation are complete .

Cement 25 KM lead

Steel 25 KM lead

Sand 10 KM lead

Bricks 15 KM lead

Stone/Stone Chips 10 KM lead

Gangway 100M long and 3M wide

EXCAVATION IN ORDINERY SOIL Earth work in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per design section in all kinds of soil including moorum soil, soil mixed with kankar, pebbles and boulders up to 300mm size and disposal of the same (beyond 50m away from the edge of the trenches) with initial lead of 150m and lift mentioned below as per specification and direction of E/I.

Lift 0 to 1.5 m

EXCAVATION IN ORDINERY OR SOFT ROCK Earth work in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per design section in all kinds of ordinary rock or soft rock (Vide classification of soil item-C) with disposal of soil ( beyond 50m from the edge of trenches ) with initial lead of 150m and lift mentioned below as per specification and direction of E/I. (Soft Rock where blasting is required and approved by the concerned Chief Engineer).

Lift 1.5m to 2.5 m

PLAIN CEMENT CONCRETE IN FOOTING Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete.

REINFORCED CEMENT CONCRETE FOOTING( M-300) Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and Steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T,A.C.C.,Ambuja, Birla Gold, Manikgad, Rajashree,etc. cement is permitted.) (Excluding M.S. or Tor reinforcement).

REINFORCED CEMENT CONCRETE Providing and casting in situ Ready mix Cement Concrete grade of trap / granite / quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, including transporting from mixing plant upto a distance of 30 km , pouring the concrete at work site, etc. complete (Excluding reinforcement and structural steel )

Column-M-300

Beams-M 250

Slab-M 250

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire).

GI PIPE RAILING Providing & fixing GI pipe railing having 1 m height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 m c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete.

SNOWCEM TO EXTERIOR SURFACE Providing two coats of Snowcem of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with sand paper scaffolding, curing and taxes all complete as per the building specification and direction of E/I.

DEWATERING Dewatering the excavated trenches and pools of water in the building trenches /pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

EARTH FILL IN ENBANKMENT Earth work in dam fill by head load in pervious or impervious soil with initial lead of 150M and initial lift of 1.5M including breaking clods to maximum 63 cube, placing the earth in layers not exceeding 225mm thick as per specification and direction EI.

STONE PITCHING For pitching with stone boulder duly packed in slope and apron with materials within 150m of work site and all lifts as per specification and direction of EI.

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete.

Cement 25 KM lead

Steel 25 KM lead

Sand 10 KM lead

Stone/Stone Chips 10 KM lead

Mechanical & Electrical Work at Intake well

Supply, installation, testing and commisssioning of vertical turbine pumpsets with allied equipment as under (Please refer to Section 5,Sl. 2.4 of SBD)

VT Pump and Motor Vertical Turbine Pump suitable for flow 41.67 LPS, 21 M Head with Supplying, Installation, Testing & Commissioning of vetical turbine Pumpset as per IS 1710, coupled with suitable IE3 or latest sqiurral cage induction motor as per IS12615 with all accessories like column pipe assembly, pressure guage, stainer, foot valve, suction line, delivery line, common header all types of valves, lovereate work, labour, technician etc. all complete job as epr site requirement.

Starter for the Pumps Providing, erecing, commissioning and testing of fully automatic star delta Starters for the Pumps of motor capacity of @20 HP 415 Volts, etc. all complete job (Make L&T/siemeins/ABB/Schneider).

Panel Designing , providing, erecing, commissioning and testing of Electrical Control Panel for Pumps and Other Electrical Equipments including copper bus (100 A), Incoming feeder (1 no, 100 A), Out feeder (3 nos, 63 A MCCB), voltmeter, Capacitor Banks, Ammeter, indicating lamp, all types of relay & protection unit, etc all complete as per IE rules & direction of E/I.

Earthing Designing, providing, erecting, commissioning & testing of the Earth Pits, copper, strip, earthing, pipe, etc. all complete job as per IS 3043.

Lightning Arrester Designing, providing, erecting, connecting Lightening Arrester on Jackwell Area Building, as per IE rules

Street Lights in Head Works Transformer and Outside area up to far end of river crossing bridge Providing And Erecting street lights in the Head Works area complete with fitting and testing, including external & internal lighting for entry campus with all accessoreies as per site requirement & IE rules.

Incoming Cable from Transformer to Elect Panel at JackWell Providing Fixing and Testing of 1.1 KV, 50 Sq MM 3 1/2 core Aluminium Conductor XLPE / PVC Armoured Cable (from transformer to panel) supply of cable and Laying of cable)

Cables and Other Electrical Providing, Laying , Connecting, Testing of 10 sq.mm copper cable, 1.1 KV grade, unarmored cable with all accessories, cable tray, etc. all complete (from Panel to motor)

Hoist (Chain Dulley block) Providing, erecting and commissioning of 3 ton triple spur gear type chain pulley block suitable for 6 m lift complete with wad chain and hand chain suitable for above lift, tested to 50 % Over load as per IS 3832 carrying ISI mark, as per the direction of E/I.

Substation Fencing, Safety & Fire Fighting Equipment, Arstaid Box, tools & tackles, etc. Designing, providing, installing Substation Fencing, Safety & Fire first aid box, tools & tackles fighting equipment / accessories

Emergency Lighting on UPS / Inverter Designing, providing, installing, commissioning of Inverter for Emergency Lighting in Head Works

(Mechanical & Electrical Part at WTP)

Suply, installation, testing and commisssioning of horizontal casing centrifugal pumpsets with alied equipment as (Please refer to Section 5,Sl. 2.5 of SBD)

CF Pump and Motor CF Pump suitable for flow 39.38 LPS, and 40 M Head with Motor. HSC CF pump as per IS 5120 coupled with squirral cage induction motor (IE3 or latest, as per IS 12615) operated in 415 V including all accessories for complete installation or pump set. Like pressure guage, suction line, delivery line, common header, all types of suitable valves, technicians labour, concrete work etc. all complete job as per site requirement.

F.A.S.D. Starters for CF Pumps Providing, erecing, commissioning and testing of FASD Starters for the Pumps of motor capacity of @40 HP 415 Volts, Complete with all accessoris. (Make : L&T / Siemens/ ABB/ Schneider).

Electrical Panel for WTP Designing , providing, erecing, commissioning and testing of WTP Power Distribution : Electrical Control Panel for Pumps and Other Electrical Equipments, Complete. Including incoming feeder (200 A, MCCB), Copper Bus Bar (200 A), 100 A MCCB (3 nos.) for outgoing feeder, suitable voltmeter, Ammeter, Capacitor Banks , indicating (Sumps, all types of relay, all protection units etc. all complete as per site requirement and IE rules.

Earthing Designing, providing, erecting, commissioning & testing of the Earth Pits, copper strip, earthing pipe, etc all complete job as per IS 3043

Lightning Arrester Designing, providing, erecting, connecting Lightening Arrester on WTP Area Building, as per IE rules

Incoming Cable from Transformer to Main Power Destribution Panel at WTP Providing Fixing and Testing of 1.1 KV, 120 Sq MM 3 1/2 core Aluminium Conductor XLPE / PVC Armoured Cable (From transformer to panel). (Jharkhand SOR 2018 supply of cable and Laying of cable)

Providing & erecting 25 sq.mm, 1.1 KV grade, unarmoured copper cable with all accessories, cable tray, etc (from panel to motors)

Hoist Providing, erecting and commissioning of 3 ton triple spur gear type chain pulley block suitable for 6 m lift complete with wad chain and hand chain suitable for above lift, tested to 50 % Over load as per IS 3832 carrying ISI mark, as per the direction of E/I.

Substation Fencing, Safety & Fire Fighting Equipment, Firstaid Box, Tools & Tackles Designing, providing, installing Substation Fencing, Safety & Fire firstaid box, tools & tackles fighting equipment / accessories

Emergency Lighting on UPS / Inverter Designing, providing, installing, commissioning of Inverter for Emergency Lighting in WTP (Office, Filter area ,Out side Emergency Lights,Other area ).

Raw Water Rising main.

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Laying of Raw & clear water Rising Main (Please refer to Section 5,Sl. 3.0 of SBD)

PROVIDING D.I. PIPES K-9 GRADE Providing and Supplying ISI marked centrifugally cast (Spun) Ductile Iron Pipes of 100mm and above all diameter for water works Socket and spigot ends confirming to the IS:8329/2000 in standard working lengths of 4.5, 5.5 & 6.0M for classification K-7 & K-9 suitable for push on Joint (rubber Gasket D jointing) with cement mortar lining inside the pipes with outside Zinc and bitunous coating rate are ex-factory, including transportation, taxes & duties contractor profit & over head charge etc. Based on WPI August 2016 (Including cos of one No. Gasket for each pipe).

300 mm Dia

PROVIDING D.I. PIPE SPECIALS Providing and supplying ISI standard D.I specials and fittings with sealing rubber gasket of S. B. R. complete with cast iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. pipes including ED, CST, all Taxes, etc. complete as per IS 9523 but excluding freight. Flanged

100-300mm dia

Supplying labours, tools and tackles for testing of laid C.I. or UPVC or H.D.P.E. or AC Pressure pipe up to 60metre head of water all complete as per specification and direction of E/I 300mm dia

PROVIDING SLUICE VALVE PN-1.0 ( without by pass arrangement) Providing Double Flanged Sluice Valves (Size 50mm to 1200mm) conforming to IS - 2906 / 14846 including worn gear arrangements as per test pressure, stainless, steel spindle, caps, including all taxes, transportation, etc. Complete.

300 mm dia

PROVIDING KINETIC AIR DOUBLE ORIFICE FLANGED VALVE Providing and supplying kinetic Double orifice type Air valves as per standards specifications having small orifice vulcanite ball seating on moulded seat ring, with built in kinetic features, isolating sluice valve mounted in horizontal position and operated by wheel gears, inlet face and drilled , including all taxes ( central and local) , insurance, third party inspection charges, loading , unloading, transportation upto Departmental store/site etc. complete. Type PN 1.6

80mm air Valve

EXCAVATION IN ORDINERY SOIL Earth work in excavation of trenches in ordinary soil (Vide classification of soil item -A) and disposal of excavated earth so obtained (beyond 50m away from the edge of the trenches) with initial lead of 150m and lift mentioned below as per specification and direction of E/I.

Lift 0 to 1.5 m

EXCAVATION IN ORDENERY OR SOFT ROCK Earth work in excavation in ordinary or soft (where blasting is not needed) (Vide classification of soil item -C) with initial lead of 10m and lift 1.5m. including dressing making the sides in proper profile and dressing the bedin proper grade etc.all complete as per specification and direction of E/I.(Soft rock where blasting is required and approved by the concern Chief Engineer).

Lift 0 to 1.5 m

Excavation in road Supplying tools and cutting road as well restoring the same as per specification and direction of E/I

a) Pucca road (except black top only taken out materials to be used) for cutting road as per requirement.

LOWERING AND LAYING DI PIPES Lowering laying and jointing with SBR rubber gaskets C.I S/S pipes of various classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by Engineer - in - charge including conveyance of materials from stores to site of work, including cost of jointing materials and rubber rings, labour, giving hydraulic testing, etc. complete.

300 mm dia

LOWERING AND LAYING VALVES Lowering, laying and jointing in position C.I. D/F Reflux valves, Butterfly Valve, sluice valves Including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulics testing etc. complete.

300 Sluice Valves (Dia in mm)

Providing PCC M150 with nominal mix of (1:2:4) in foundation with approved quality of stone metal grade -III (50mm to 25mm Size) clean coarse sand of FM 2.5 to 3 including screening, shuttering , mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer-In-charge. ( FOR THRUST BLOCK)

Valve Brick Chamber Providing and constructing RCC M200 valve chamber with 20 cm thick wall, bottom slab of 10cm thick and top slab of 15cm, PCC-150 bedding of 10cm thick , including excavation up to required depth in all types of soil or rock, refilling, including reinforcement Fe 500 of required diameter, dapuri steps or 22mm dia M.S bar steps with anticorrosive paint to steps, disposed of excess excavated material uo to 150m Lead & in all lifts etc. complete as directed by Engineer by In charge. 1.2MX0.9MX1.5M

Air Valve Shaft Providing and fixing in posistion air valve shaft including providing and fixing GI medium Class or 6mm thick MS pipe shaft of 2.70m long over branch flange of air valve tee, providing PCC block pf M-150 Concrete of 150mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 together with providing and making flanged joints whrever required and fixing of air valve tee etc. complete, as per type design and direction of Engineer- In- Charge for following diameters pipe lines. Foundation in BC soil or Any other soil.

80mm air Valve

REFILLING IN TRENCHES (BACKFILLING) Filling available excavated earth in trenches, plinth, sides of foundation etc in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering, lead upto 50m and lift up to 1.5m.

Clear Water Rising main.

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Laying of Raw & clear water Rising Main (Please refer to Section 5,Sl. 3.0 of SBD)

PROVIDING D.I. PIPES K-9 GRADE Providing and Supplying ISI marked centrifugally cast (Spun) Ductile Iron Pipes of 100mm and above all diameter for water works Socket and spigot ends confirming to the IS:8329/2000 in standard working lengths of 4.5, 5.5 & 6.0M for classification K-7 & K-9 suitable for push on Joint (rubber Gasket D jointing) with cement mortar lining inside the pipes with outside Zinc and bitunous coating rate are ex-factory, including transportation, taxes & duties contractor profit & over head charge etc. Based on WPI August 2016 (Including cos of one No. Gasket for each pipe).

300 mm dia

PROVIDING D.I. PIPE SPECIALS Providing and supplying ISI standard D.I specials and fittings with sealing rubber gasket of S. B. R. complete with cast iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. pipes including ED, CST, all Taxes, etc. complete as per IS 9523 but excluding freight.

100-300mm dia Flanged

Supplying labours, tools and tackles for testing of laid C.I. or UPVC or H.D.P.E. or AC Pressure pipe up to 60metre head of water all complete as per specification and direction of E/I 300 mm dia

PROVIDING SLUICE VALVE PN-1.0 ( without by pass arrangement) Providing Double Flanged Sluice Valves (Size 50mm to 1200mm) conforming to IS - 2906 / 14846 including worn gear arrangements as per test pressure, stainless, steel spindle, caps, including all taxes, transportation, etc. Complete. 300 mm dia

PROVIDING KINETIC AIR DOUBLE ORIFICE FLANGED VALVE Providing and supplying kinetic Double orifice type Air valves as per standards specifications having small orifice vulcanite ball seating on moulded seat ring, with built in kinetic features, isolating sluice valve mounted in horizontal position and operated by wheel gears, inlet face and drilled , including all taxes ( central and local) , insurance, third party inspection charges, loading , unloading, transportation upto Departmental store/site etc. complete. 80mm air Valve

EXCAVATION IN ORDINERY SOIL Earth work in excavation of trenches in ordinary soil (Vide classification of soil item -A) and disposal of excavated earth so obtained (beyond 50m away from the edge of the trenches) with initial lead of 150m and lift mentioned below as per specification and direction of E/I.

Lift 0 to 1.5 m

EXCAVATION IN ORDENERY OR SOFT ROCK Earth work in excavation in ordinary or soft (where blasting is not needed) (Vide classification of soil item -C) with initial lead of 10m and lift 1.5m. including dressing making the sides in proper profile and dressing the bedin proper grade etc.all complete as per specification and direction of E/I.(Soft rock where blasting is required and approved by the concern Chief Engineer).

Excavation in road Supplying tools and cutting road as well restoring the same as per specification and direction of E/I a) Pucca road (except black top only taken out materials to be used) for cutting road as per requirement.

LOWERING AND LAYING DI PIPES Lowering laying and jointing with SBR rubber gaskets C.I S/S pipes of various classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by Engineer - in - charge including conveyance of materials from stores to site of work, including cost of jointing materials and rubber rings, labour, giving hydraulic testing, etc. complete.

300 mm dia

LOWERING AND LAYING VALVES Lowering, laying and jointing in position C.I. D/F Reflux valves, Butterfly Valve, sluice valves Including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulics testing etc. complete.

300 mm dia Sluice Valves

Providing PCC M150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm Size) graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering , mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer-In-charge.

Valve Chamber with precast RCC Covers Providing and constructing RCC M200 valve chamber with 20 cm thick wall, bottom slab of 10cm thick and top slab of 15cm, PCC-150 bedding of 10cm thick , including excavation up to required depth in all types of soil or rock, refilling, including reinforcement Fe 500 of required diameter, dapuri steps or 22mm dia M.S bar steps with anticorrosive paint to steps, disposed of excess excavated material uo to 150m Lead & in all lifts etc. complete as directed by Engineer by In charge. 1.2m x 0.9 m x 1.2m

Air Valve Shaft Providing and fixing in posistion air valve shaft including providing and fixing GI medium Class or 6mm thick MS pipe shaft of 2.70m long over branch flange of air valve tee, providing PCC block pf M-150 Concrete of 150mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 together with providing and making flanged joints whrever required and fixing of air valve tee etc. complete, as per type design and direction of Engineer- In- Charge for following diameters pipe lines. Foundation in BC soil or Any other soil.

80mm air Valve

REFILLING IN TRENCHES (BACKFILLING) Filling available excavated earth in trenches, plinth, sides of foundation etc in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering, lead upto 50m and lift up to 1.5m.

DISTRIBUTION MAIN

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labour, materials, equipment to procure and laying of DI class K-7 pipes with Cement Mortar Lining for distribution main (Please refer to Section 5,Sl. 3.0 of SBD)

PROVIDING DI K-7 PIPE Providing and Supplying ISI marked centrifugally cast (Spun) Ductile Iron Pipes of 100mm and above all diameter for water works Socket and spigot ends confirming to the IS:8329/2000 in standard working lengths of 4.5, 5.5 & 6.0M for classification K-7 & K-9 suitable for push on Joint ( rubber Gasket D jointing) with cement mortar lining inside the pipes with outside Zinc and bitunous coating rate are ex-factory, including transportation , Taxes & duties contarctor profit & over head charge etc. Based on August 2016 (Including cost of one No. Gasket for each pipe)

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

450 mm dia

D.I. PIPE SPECIALS Providing and supplying ISI standard D.I specials and fittings with sealing rubber gasket of S. B. R. complete with cast iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. pipes including ED, CST, all Taxes, etc. complete as per IS 9523 but excluding freight.

100-300mm Socketed

350-450mm Socketed

SLUICE VALVE PN-1.0 ( without by pass arrangement & with ED) Providing Double Flanged Sluice Valves (Size 50mm to 1200mm) conforming to IS - 2906 / 14846 including worn gear arrangements as per test pressure, stainless, steel spindle, caps, including all taxes, transportation, etc. Complete. Sluice Valves (Dia in mm)

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

450 mm dia

EXCAVATION IN ROAD Supplying tools and cutting road as well restoring the same as per specification and direction of E/I. a) Pucca road (except black top only taken out materials to be used) for cutting road as per requirement

b) Water bound macadam (taken out materials to be used) for cutting road as per requirement

c) Concrete road (Dismantling)

d) PCC Work M15 grade

EXCAVATION IN ORDINEY SOIL Earth work in excavation of trenches in ordinary soil (Vide classification of soil item -A) and disposal of excavated earth so obtained (beyond 50m away from the edge of the trenches) with initial lead of 150m and lift mentioned below as per specification and direction of E/I.

Lift 0 to 1.5 m

EXCAVATION IN ORDENERY OR SOFT ROCK Earth work in excavation in ordinary or soft (where blasting is not needed) (Vide classification of soil item -C) with initial lead of 10m and lift 1.5m. including dressing making the sides in proper profile and dressing the bedin proper grade etc.all complete as per specification and direction of E/I.(Soft rock where blasting is required and approved by the concern Chief Engineer).

Lift 0 to 1.5 m

LOWERING AND LAYING DI PIPES Supplying labour and toools as well as lead and yarn as per I.S.I specification confirming to I.S.I 1782-1978 and yarn confirming to I.S.S 6587-1972 for laying, jointing C.I spun pipes in trenches and providing night guard, barrier and red light to safe guard against accident etc. all complete as per specification and direction of EI(pipe to be supplied Departmently free of cost laying od GI pipes to be done as per I.S.S 3114-1985).

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

450 mm dia

LOWERING AND LAYING VALVES Lowering, laying and jointing in position C.I. D/F Reflux valves, Butterfly Valve, sluice valves Including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulics testing etc. complete. Sluice Valves (Dia in mm)

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

450 mm dia

Supplying labours, tools and tackles for testing of laid C.I. or UPVC or H.D.P.E. or AC Pressure pipe up to 60metre head of water all complete as per specification and direction of E/I.

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

450 mm dia

Providing and fixing C.I. Road boxes of 225mm x 300mm (40 kg) for sluice valve. Providing and fixing C.I. Road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing etc. complete (40 Kg).225 mm x 300 mm

For 80 mm to 100 mm Dia.

Valve Chamber with precast RCC Covers Providing and constructing B.B. Masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame & cover etc. complete as directed by Engineer by In charge. Note: Wall thickness:0.23 m for depth of 1.2 m & 0.35 m for balance depth exceeding 1.2 m.

Size 1.2mx0.9mx1.5m

REFILLING IN TRENCHES (BACKFILLING) Filling available excavated earth in trenches, plinth, sides of foundation etc in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering, lead upto 50m and lift up to 1.5m.

Twin Type Staff Quarter - 1 Unit (Please refer to Section 5,Sl. 2.7 of SBD)

E/W in Excavation in foundation trenches in ordinary soil (Vide classification of soil Item -B) & disposal of excavatd earth obtained to a distance up to 50 M including all lift leveling ramming the foundation trenches removing root of trees scrubs all complete as per approved design.

Providing ,coarse clean sand in filling in foudation trenches /in Plinth including ramming & watering in layers not exceeding 150 mm thick with all leads lift including cost of all materilas ,labour , royalty & taxes all complete as per building specification & direction Of E/I

Providing designation 75 A one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I

Providing P.C.C M-100 in nominal mix of (1:3:6) in foundation with appoved quantity of stone metal (50 mm 25 mm dia size)graded & clean coarse sand of F.M 2.5 to 3 including screening , shuttering , mixing cement concrete in mixer & placing in position , vibrating , striking , curing taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M. (1:6) in foundation 7 Plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including Providing 10 mm thick mortar joints ,Cost of screening , materials , Scaffolding , raking out joints to 15 mm depth curing , taxes & royalty all complete as per building specification & direction of E/I

Providing 25 mm thick damp proof coarse with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to3 including screening , shuttering mixing cement concrete in mixer with 5% cico or any other approved water proffing compound and placing in position , vibrating , striing , curing , taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing10 mm thick motar joints ,cost of screening , materials, scaffolding,raking out joints to 15 mm depth curing , taxes & royalty all complete as per building specification & direction of E/I

Providing R.C.C M-150 with nominal mix of (1:2:4) in lintel level with approved quality of stone chips 20 mm to 6mm size graded & clean coarse sand of F.M 2.5 to including screening , centring, shuttering and mixing cement concrete in mixer & placing in position vibrating striking curing (but excluding the cost of reinforcement ) taxes & royalty all complete as per building specification of (E/I.

Providing average 63 mm thick R.C.C M -150 with nominal mix (1:2:4) chajja in shelves with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M 2.5 to 3 including making drip course in concrete , screening , centering shuttering & mixing cement concrete in mixer & placing in position vibrating ,striking ,6 mm cement plaster (1:4) in celling & sides of chajja with sand of F.M 1.5, Curing ( But excluding the cost of reinforcement ) taxes and royalty all complete as per building specification of E/I

Providing R.C.C M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size Graded & Clean coarse sand F.M 2.5 to including making drip course in cocrete , screening , concreting , shuttering , centring mixing cement concrete in mixer & placing in position , vibrating ,striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building Specification & direction of the E/I

Supplying fitting & fixing good quality ,well dressed & well seasoned sal wood work in choukhat in doors , windows , skylights , fan light and C/W celestial windows openings , including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of E/I

Supplying fitting and fixing 250X20X6 mm L-type M.S Clamp properly fish tailed .including making holes and setting the same in 375 X125X75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and diection of E/I @6 for each door & 4 for each window Total Quantity -(2X3X6+2X4X4)=68 nos

Supplying all materials , labours and fitting & fixing 38 mm (1.5) thick good quality seasoned sal wood battened shutter ledged & braced in door and windows with oxidized iron fitting such as hingles ,sliding door bolts , tower bolts , handles or ings hooks and eye , cleats , sand block as per schedule , taxes & royalty all complete as per building specification & direction of Engineer -in- charge

Supplying , fittings & fixing M.S /Gril made of 20X6 mm M.S flat as per approved design & drawing properly fabricated with joints continous filllet welded and finshed smooth , carriage of grill to work site hoisting as per the building specification and direction of E/I ( where materials is not supplied by the Deptt .)

Providing 25 mm thick pre cast R.C.C M-150 with nominal mix of (1:2:4) in jali with approved quality to stone chips of 6mm nominal size and clean coarse sand of FM 2.5 to 3 with 1.6 mm thick M.S wire as per approved design and drawing and placing the same in position true to plumb and level and properly grouted with cement mortar (1:3) including cost of curing , Scaffolding and finishing all complete as per building specification and direction E/I

Providing and fixing fan hook of 16 mm dia M.S bar 1 meter long bent to reqired size and shape placed in position and fixing in R.C.C slab/beam at the time of casting all complete as per building specification of E/I where material is not supplied by cheet

Supplying , fitting and Fixing M.S Grill gate made of 20X 6 mm M.S or 16 mm M.S raurbar Flat fitted on 25 mm X 25 mm X 6mm M.S angle frame of size 60X60X6 as per approved design including cost of fabrication & drawing , properly fabricated with joints continuous fillet welded & finished smooth, providing necessary locking arrangements with Haskell & dummy duly fixed in C.C (1:2:4) blocks of reuired size applying a priming red lead paints over steel works , taxes , carriage of grill to work site , asper the building specification & direction of E/I ( where materials is not supplied by the Dept)

Providing 6 mm thick cement plaster (1:4) in celling with approved quality of clean coarse sand of F.M 1.5 including screening , curing with all leads & lifts of water , scaffolding , taxes & royalty all complete as per building specification & direction of E/I

Providing 12 mm thick cement plaster (1:6) with approved quality of clean coarse sand of F.M 1.5 including screening .Curing with all leads & lifts of water , Scaffolding , taxes 7 royalty all complete as per building specification & direction of E/I.

Providing cement 1:3 (12mm ) plaster with cement mortar (1:3) using clean coarse sand finishing with neat punning a dado 6" (150 mm) high a side room and out side wall upto plinth level includng screening , curing with all leads & lifts of water , scaffolding , taxes and royalty all complete as per building specification & direction of E/I

Filling in foudation trenches & Plinth in layers not exceeding 150 mm thick well watered ,rammed ,fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I ( Mode of measurement compacted volume)

Providing 25 mm thick . First class patent stone flooring (1:2:4) with stone chips in two layers ,bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in pannels including cost of curing , finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I

Providing designation 75 A one brick on edge flooring in C.M (1:4) with top surface flush pointed in CM (1:4) approved quality of clean coarse sand of F.M 2 to 2.5 including the cost of screening ,raking out joints to 15 mm depth , curing taxes,royalty all complete as per building specification and direction (E/I)

Providing all materials , labours & doing two coat snowcem with approved quality of lime over the new surface including the cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing ,scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I

Providing all materials,labours & doing 2 (two ) Coat colour washing over a coat of white washing over new surface with approved quality of lime & Colour over the new surface including the cost of clening surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing , scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I

Providing two coats of painting with readymix paint synthetic enamel paint over a coat of primer of approved shad and make over new wooden surface after cleaning, removing dirt scales ,smokes,grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning , removing rust ,dirt ,scales ,smokes and grease and cleaning the surface thouroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Providing 2(two) coats of Paniting with ready mixed paints of approved shade & make over steel surafce including cleaning the surface thouroughly , scaffolding & taxes all complete as per building specification & direction of E/I

Providing 10 mm (TMT) Fe 500 TOR for steel reinforced as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire with cost of wore removal of rust placing the rods in position all complete as per building specification and direction of E/I

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .

Cement 25 KM lead

Steel 25 KM lead

Sand 10 KM lead

Bricks 15 KM lead

Stone/Stone Chips 10 KM lead

Water Supply Sanitation Installation (Plumbing work)

Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I.

i) 25mm GI. Pipe.

ii) 15 mm GI. Pipe.

Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I.

i) 15 mm GI. Pipe

Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I.

Supplying and fixing GI fittings of approved make all complete as per direction of E/I.

(a) Elbow 15 mm dia

(b) Tee plane 15mm dia

(c) Nipple 15mm dia.

(d) Union Socket 25mm dia

(e) Union Socket 15mm dia

(f) Brass bib cock 15mm dia

(g) C.I stop cock 15mm dia

(h) C.I. stop cock 25mm dia

(i) Reducing Socket 25x15mm

(j) Tee 25x25x15mm dia

Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stop cock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (510mm.long with 12.5 Liter low level PVC System).

SEPTIC TANK and SOAK PIT

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.

Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I.

Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mm to 6mm size well graded and clean course sand of FM-2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and directions of E/I.

(a) 19 mm thick

(b) 12 mm thick

Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I.

(a) B/W in C.M (1:4)

(b) B/W 75-B in (1:6) for Soak pit

(c) Brick work in dry masonry for soak pit.

Providing pre cast R.C.C. M-150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I.

Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.

10 mm dia

Supplying fitting and fixing H.C.I. Pipe/ H.C.I. fitting of Approved make confirming to I.S.S 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.

(a) 100mm dia H.C.I. Tee.

(b) 100mm dia H.C.I. Band

(c) 50mm dia H.C.I. Cowel

(d) 50mm dia H.C.I. Vent pipe

(e) 100mm H.C.I. Pipe

Supplying materials and labours and fixing 20mm dia M.S bar steps in wall of 0.3 m interval and staggered in (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.

Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete.

Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I.

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475 mm G.I. Cover With frame ( Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I

Carriages of materials

(a) Brick –15 KM lead

(b) Sand -10 KM lead

(c) Stone chips -10 KM lead

(d) Steel 25 KM

(d) Cement- 25 KM lead

Electrical Works

Point wiring in PVC conduit with modular type switch wiring for light point /fan point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for twin control light point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with two way modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for light /power plug point with 2 x 4 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with one no 4 sqmm FR PVC insulated copper conductor single core cable for loop earthing etc as required

Copper sub main wiring in PVC conduit Wiring for sub main wiring with PVC insulated copper conductor single core in surface/recessed PVC conduit as required

2 x 1.5 sqmm + 1 x 1.5 sqmm earth wiring

2 x 2.5 sqmm + 1 x 2.5 sqmm earth wiring

Supplying and fixing following way three pole and neutral sheet MCB distribution board 415 volts on surface/recessed complete with tinned copper bush bars ,neutral link, earth bar, din bar, detachable gland plate inter connection phosphatised and power painted including earthing etc as required (but with out mcb / rccb / Isolator) (4 +12 ) double door horizontal type

Supplying and fixing 5 amp to 32 amp, rating 240 volts, B series miniature circuit breaker of single poles in existing MCB DB complete with connecting ,testing, and commissioning etc as required

Earthing with G.I. earth pipe 4.5 M long 40mm dia including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe etc with charcoal ,salt all complete as per electrical rule

Supplying ,fitting and fixing following sizes of PVC conduct along with accessories in surface / races including cutting the wall and making good the same in case of recessed conduit as required

PVC con 20 mm PVC pipe

PVC con 25 mm PVC pipe

Installation commissioning and testing Ceiling Fan

Carriage of ceiling fan and regulator

Supplying ,fitting and fixing 5 amp ceiling rose on the existing junction

Supplying ,fitting and fixing breas batten/ angle holder including connection etc.

Supplying ,fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 3 pin 5/6 amp modular type switch, connection, painting etc as required.

Supplying ,fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 6 pin 5/6 amp and 15/16 amp socket outlet and 15/16 amp modular type switch, connection, painting etc as required.

Supplying and drawing co-axial T.V. cable RG-06 grade 0.7 nn solid copper conductor PE insulated seilded with fine tinned cover braid and protected with PVC sheath in the existing surface / recessed steel/ PVC conduit as required.

Supplying and fixing modular switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc,as required. TV antenna socket out put

Supplying ,fitting and fixing modular base and cover plate on existing modular metal boxes etc as required.

Cost of Earthing with G.I. earth pipe 4.5 M long 40mm dia G.I.Pipe 600mm x 600mm x 6mm thick copper earth plate, and 8 SWG copper wire including cost of making 1.2x1.2x3m deep pit and filling with charcoal ,salt all complete as per electrical rule

Compound Wall/ Boundry Wall. (332.80 M Long)

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of Compound wall. etc. all complete job.(Please refer to Section 5,Sl. 2.9 of SBD)

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing RCC M-200 with nominal mix of (1:1.5:3) in stiffeners with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Providing designation 75 A brick work in CM (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification & direction of E/I. Qnty. Same as Item no.13

Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I

Carriage of materials from divisional store or kiln site or quarry site to work site including contractor's profit, loading, unloading, transportation etc. all complete .

Cement 25 KM lead

Steel 25 KM lead

Sand 10 KM lead

Stone/Stone Chips 10 KM lead

Bricks 15 KM lead

Gate - 2 nos.

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing RCC M-200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I

Supplying fitting & Fixing M.S. grill gate with M.S. grills made 20x6mm M.S. flat or 16mm M.S. square bars fitted 25x25x6 mm M.S. angle frame of size 60x60x6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work , taxes all complete as per drawing specification and direction of E/I.

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface

Carriage of materials from divisional store or kiln site or quarry site to work site including contractor's profit, loading, unloading, transportation etc. all complete .

Cement 25 KM lead

Steel 25 KM lead

Sand 10 KM lead

Stone/Stone Chips 10 KM lead

Bricks 15 KM lead

Infilltration Gallery

EXCAVATION IN ORDINERY SOIL Earth work in excavation of foundation trenches, toe wall, spillway, head regulator, outlet, intake well etc. as per design section in all kinds of soil including moorum soil, soil mixed with kankar, pebbles and boulders up to 300mm size and disposal of the same (beyond 50m away from the edge of the trenches) with initial lead of 150m and lift mentioned below as per specification and direction of E/I.

Lift 0 to 1.5m

Lift 1.5 to 2.5m

Lift 2.5 to 3.5m

Providing PCC M100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade -III (50mm to 25mm Size) clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer-In-charge.

DEWATERING Dewatering the excavated trenches and pools of water in the building trenches /pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

REFILLING BY EXCAVATED MATERIAL Filling available excavated earth in trenches, plinth, sides of foundation etc in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering, lead upto 50m and lift up to 1.5m.

REFILLING SHROUDING MATERIAL Providing , Lowering , laying and placing in position shrouding material for porus pipe gallery/ slatted pipe gallery / trench gallery with all leads and lifts involved including transportation of material to site of works , screening and washing of material and placing in position with given section , etc. complete as directed by Engineer In-charge.

40mm gauge pebbles

12mm to 20mm gauge pebbles

6mm to 12mm gauge pebbles

MS HEADER PEPE Manufacturing, providing and supplying spirally welded ERW/ SAW/ fabricated M.S. pipes (Commercial Quality) including procurement of plates gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipe, welding on automatic welding machine forming 'V' edge on on both ends of pipes and M.S. specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, ciba or mahindra and Mahindra make) from inside and outside including all taxes (Central and local),railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores/sites, unloading, stacking, etc. complete.as per IS-3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 300MM OF 10MM THICK

MS SPECIALS Providing and supplying ISI standard MS special of required thickness with 3 coats of approved make epoxy paint from inside and out side including all taxes ( central and Local), octri, inspection charges, transportation to store / site and stacking, etc. complete.

LOWERING AND LAYING HEADER PIPE Transporting within 500 meters, laying in position to correct line and level M.S. pipes with/without any out coating, on prepared bedding in trenches/on pedestals or chairs upon piers, trestles, etc. marginal cutting wherever required, assembling, tack welding the same. The rate to include loading, unloading, hoisting, etc. complete as specified. a)Above 8mm upto 12mm thick Above 250mm upto 500mm dia.

FIELD WELDING HEADER PIPE AND SPECIALS Welding in all positions with required number of runs, for M.S. pipes internally and or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as specification. Plate thickness 10mm

GAS CUTTING Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness. Above 10mm upto 14mm

EPOXY PAINITING FOR INNER AND OUTER SURFACE Providing & applying primer one coat of Epoxy Paint or equivalent such as Dr. bake, Krishna conchem, Asian paint, Atul limited, Burger Paint, Epoxy primer 50 to 60Microns thick and two coats of gamma coatings or equivalent such as Dr. bake , Krishna conchem, Asian paint, Atul limited, Burger Paints 30 microns thick each to new M.S. pipes and structural steel or concrete surface including repainting the surface by finishing by solvent degreasing and derusting by applying chemical method and scaffolding if necessary etc. complete as per manufacturer's specifications.

ROSE PIECE/ SCREEN PIPE Providing and fixing in position MS rose pieces in intake wells including cost of all materials and labour, painting with three coats of anti corrosive oil paint or food grade Epoxy paint etc. complete as directed by E/I. All Rose pieces should be perforated having 25mm dia hole 50mm centre to centre. Perforations should not be less than 55% of surface area. (MJP/DSR/2019-20, PG- / It No 13, Section J)

COFFER DAM Providing, Constructing Coffer Dam in river basin/dam storages as per type design including excavation, filling the middle portion with B.C. soil (in gunny bags if required). Providing impervious /semi pervious materials on both sides of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engineer-in-charge till the completion of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge.

APPROACH ROAD (500M)

EXCAVATION Excavation for roadways in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres.

WATER BOUND MACADAM Providing, laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.

WET MIXMACADAM Providing, laying spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading ,unloading transportation are complete .

Cement 10 KM lead

Sand 36 KM lead

Stone/Stone Chips 11 KM lead

House Connection for 3928 nos Consumer.

Earth work in excavation ( as per I.S. 3114/1965 for laying of different types and sizes of pipes so as to give 1 m av. cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/l. (For soil item B)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).

Provinding P.C.C M-150 with in norminal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including , screening , shuttering, mixing cement concrete in mixture and placing in position vibrating striking curing taxes and royality all complete as per building specifiaction and direction of E/I

Earth work in back fillingthe trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(For soil item A & B)

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and supplying blue MDPE pipes confirming to ISO 4427:1996 manufactured from vergin resin PE 80 food grade compounded raw material having blue colour only assurance certificate from quality agencies like WRC / CIPET ( India) / DVGM / KIWA / SPGN etc. for usage in drinking water with quality system. The cost shall including cost all taxes, inspection charges transprotaion to work site and earth work involved , all complete job as per specification and direction of E/I. 20 mm dia pipe.

Providing and supplying G.I. pipes (Tata and equivalent make) for usage in drinking water with quality system, The cost shall include testing of all materials all taxes central , State , Municipal, Inspection charges transportation up to site transite insurance, loading, unloading, stacking etc. complete as specified and directed.

Lowering laying and jointing HDPE / MDPE pipe in proper position including all specials by Compression fitting / Electrofusion and But fusion jointing procedure including hydraulic testing as er relevent IS Code complete with all materials for jointing procedure like Electrofusion machine ,Electric mirrior/heater/But fusion welding machine with hydraulic testing and all labours as directed by engineer in charge as per IS-7634 part II

Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of E/l. (Pipe with socket to be supplied deparmentally free of cost).

Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dia ferrule weight not less than 425 gram

Providing and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/ (a) 20 mm dia and weight not less than 400 gram.

Providing and fixing 15 mm Dia male ended C.I Body Brass Spindle valve and seat bib cock of approved quality (Wt.not Less than 400 gms.) with extra socket all complete as per specification and Direction of E/I.

Supplying and fixing G.I. fittings of Approved make all complete as per specification and Direction of E/I

Elbow 20 mm

Elbow 15 mm

Reducing Socket 20 mm

Nipple 20 mm

Nipple 15 mm

Union Socket 20 mm

Socket 15mm

Socket 20 mm

Carriage of materials

Operation & Maintenance for two years

O/M work with Labour component & Materials for 1st Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 2nd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 3rd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 4th Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 5th Year

As per SBD Section - 5 Clouse 9.10

Labour Cess 1%

Singh Electricals And Constructions