Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹73.0 LAccepted-AOC MANGALDAI | BARPETA | ASSAM | 781308 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹73.0 L+₹3,199 (0.04%)Rejected-AOC ASSAM AS | BARPETA | ASSAM | 781308 | L2 | Rejected-AOC Second lowest bidder | |
| 3 | L3₹73 L+₹4,416 (0.06%)Rejected-AOC W NO 10 BHEBARGIHAT P O P S MANGALDOI DIST DARRANG PIN 784125 | MANGALDOI | DARRANG | ASSAM | 784125 | L3 | Rejected-AOC Highest Bidder |
| Sl No | Description | Qty | Unit | KALPA SINGH BORDOLOI L3 | NIP DUTTA SAHARIA L2 | BHUBANESWAR BARUAH L1 |
|---|---|---|---|---|---|---|
| 1.00 | Clearing grass and removal of rubbish upto a distance of 30 m outside the periphery of the area as per technical Specification clause201. By manual Means . | 0.52 | Hect | 13,500 ₹6,979.5 Lowest | 14,000 ₹7,238 | 13,732.3 ₹7,099.6 |
| 2.00 | Construction of subgrade and earthen shoulders with approved material obtain from borrow pits with all lifts and leads,transporting to site, spreading grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000m as per technical Specification clause 303.1 (1) Private Land | 866.48 | Cum | 320 ₹2,77,273.6 | 318 ₹2,75,540.64 Lowest | 318 ₹2,75,540.64 Lowest |
| 3.00 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:
All kinds of soil. | 172.8 | Cum | 115 ₹19,872 | 114 ₹19,699.2 | 113.42 ₹19,598.98 Lowest |
| 4.00 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more. | 7,339.85 | Kg | 100 ₹7,33,985.1 | 99 ₹7,26,645.25 Lowest | 99 ₹7,26,645.25 Lowest |
| 5.00 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. | 2,758.91 | Kg | 98 ₹2,70,372.79 Lowest | 100 ₹2,75,890.6 | 99 ₹2,73,131.69 |
| 6.00 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 105.21 | Cum | 11,500 ₹12,09,915 | 11,200 ₹11,78,352 | 11,100 ₹11,67,831 Lowest |
| 7.00 | FORM WORK: - Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass
concrete | 178.5 | Sqm | 300 ₹53,550 Lowest | 326 ₹58,191 | 325.42 ₹58,087.47 |
| 8.00 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand) | 95.44 | Cum | 8,000 ₹7,63,520 | 7,295 ₹6,96,234.8 | 7,294.92 ₹6,96,227.16 Lowest |
| 9.00 | Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 7,115.79 | Kg | 172.5 ₹12,27,473.78 | 162 ₹11,52,757.98 Lowest | 163.24 ₹11,61,581.56 |
| 10.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Enginee in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape
wherever required. | 1,392 | Sqm | 800 ₹11,13,600 | 711 ₹9,89,712 Lowest | 711.26 ₹9,90,073.92 |
Tender Value
₹73 L
EMD Value
₹1.5 L
Closing Date
18 Dec 2025, 2:00 pmClosed
Executive Officer,MMB
Office of the Mangaldai Municipal Board.
Construction of Market Shade at old fish Market area ward no-03, Mangaldai under 15th Finance Commission 2024-25 (1st and 2nd instalment) untied grant.
2025_UDD_48894_1
MMB/1192/2025/1279dated 27/11/2025
Open Tender
Civil Works - Others
Item Rate
180 days
Ward No. 3, Mangaldai Town
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
₹1.5 L
Yes
3 Feb 2026
27 Nov 2025
19 Dec 2025
1 Dec 2025
18 Dec 2025
3 Dec 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Document
0.40 MB
Tender Documents
Tender Documents • 1.50 MB
BOQ
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .