Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC PLOT NO 74 150 FT ROAD P O NEW P A C GANGA NAGAR MARG SHYAM NAGAR KANPUR 208015 UP | KANPUR | KANPUR | UP | 208015 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹35.6 L+₹2.3 L (6.77%)Rejected-Finance 25 1 SIMRA P O KIDWAI NAGAR KANPUR UP 208011 | KANPUR | KANPUR | UP | 208011 | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹36.0 L+₹2.6 L (7.76%)Rejected-Finance 88 197 B CHAMAN GANJ KANPUR 208001 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208001 | L3 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 4 | L4₹39.0 L+₹5.6 L (16.8%)Rejected-Finance 430 D DEFENCE COLONY JAJMAU KANPUR 208010 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208010 | L4 | Rejected-Finance HIGHER THAN L1 BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Srinath P L
GE I Kanpur Cariappa Road Cantt Kanpur 208004
WELCOME MAINT AND OTHER B R WORKS AT OFFICER ACCN OF AGE B/R-I UNDER GE(I) KANPUR.
2022_MES_552820_1
GE(I)/KAN/T-59 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
KANPUR
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE I KANPUR
₹90,000
Yes
3 Dec 2022
19 Sept 2022
24 Oct 2022
19 Sept 2022
17 Oct 2022
3 Oct 2022
Amount
Demolition of brick work of any description and in any position built in cement mortar including quoins arches and pillars complete all as specified.
M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.
All as per item No. (02) here in before but except bricks and complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges complete as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Dismantling of unframed work timber scantlings 40 sq. cm and over in section, in any position and complete all as specified and directed.
Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and as directed.
S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified & directed
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified and directed.
S&F wind ties for roof including securing bolts as directed, including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
Demolition of unreinforcement cement concrete of any description and in position not otherwise specifically provided for complete all as specified and directed
M&L for PCC type B0 (1:2:4 using 12.5mm graded stone aggregate) as in roof kerb, benching/ padding over roof surface including chamfered on eges etc complete all as directed.
M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copings, filling for fixing of hold fast etc including necessary formwork etc and complete all as specified and directed.
Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc.complete all as specified.
M&L for 10mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished fair and even (upto two storey of building) complete all as specified.
M & L for 15mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces of walls, finished fair and even (upto two storey of building) complete all as specified.
M & L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall finished fair and even complete all as specified.
Supply only integral water proofing compound. ISI Marked and complete all as specified and directed.
M & L for 6mm thick non asbestos fiber cement building boards fixed to walls with rawl plug not less than 75mm long and steel screws complete including taking down all as specified.
M&L for preparation of new plastered surfaces and applying three coats of white wash as on ceiling surfaces complete all as specified.
M&L for preparation of new plastered surfaces and applying three coats of white wash as on wall surfaces complete all as specified and directed
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over a coat of primer and wall care putty for getting smooth surface complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.
M&L for preparation of old plastered surfaces and applying one coat of white wash as on wall including removing/ brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified.
All as per Item No (25) here-in-before but as on ceiling and complete all as specified and directed.
M&L for preparation of old plastered surfaces including removing / brooming down or scraping down loose dirt by steel wire brushes etc, applying wall care putty where required for filling purpose of any depression /cavity etc and applying one coat of oil bound distemper of any colour on wall by Trucare Graco machine/Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working complete all as specified and directed. (Note : M&L for protecting/covering door/window etc during spray shall be deemed to be included in this item.)
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coats of oil bound distmper over a coat of primer of any colour by Trucare Graco machine/Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working and applying wall care putty for getting smooth surface complete all as specified and directed. (Note : M&L for protecting/covering door/window etc during spray shall be deemed to be included in this item.)
M&L for preparation of old plastered surfaces and applying one coat of cement based paint of approved shade on plastered surfaces or unplastered surface of wall including brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified.
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.
M&L for preparation of old wooden surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified.
All as per Item No (31) here-in-before but two coat of synthetic enamel paint and complete all as specified and directed.
M&L for preparation of old steel surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified.
Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified. (Note : Debris obtained from dismantling will be dispossed off as directed)
M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
All as per Item No (36) here-in- before but as in skirting over 10 mm thick rendering in CM (1:4) all as specified and as directed.
M & L for vitrified coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, polished as in floors laid over 15mm thick screed or screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as specified.
All as per Item No (38) here-in- before but as in skirting over 10 mm thick rendering in CM (1:4) all as specified and as directed.
M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar. (Note : Debris obtained from demolition will be dispossed off as directed)
Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces all as specified and as directed.
M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.
M&L for non skid coloured heavy duty parking tiles of size 300x300x9-10 mm thick impact resistance over 15 mm thick screed bed in CM 1:6 complete all as directed by Engineer-in-Charge.
M&L for chequered cement concrete tiles 30cm x 30cm x 22mm thick, laid over 15 mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of tiles complete all as directed by Engineer-in-Charge.
Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height including fittings/grids etc complete all as specified and directed.
Supply & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with DUNE (MICRO LOOK) EDGE TILES WITH ARMSTRONG XL 15 mm EXPOSED STEEL ANGLE. The tiles should have Humidity Resistance (RH) of 99%, NRC Upto 0.5, Light Reflectance >85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class 0/Class1 (BS 476 Part 6&7) in module size of 600 X 600 X 16 mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38-41%.The steel angle should be of “Armstrong” make with 15mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32,mm and a load carrying capacity of 7.5 Kgs/Sqm. The T Sections have a Galvanizing of 90 grams per Sqm & passed through 500 hrs of Salt test ,Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centre to centre incl 4 mm dia suspension wire MS @ 1200mm C/C complete all as specified and directed according to manufacturers instruction and Complete all as specified and as directed.
S & F Armstrong Mineral Fibre Acoustical Suspended Ceiling tiles with DUNE (MICRO LOOK) EDGE TILES WITH ARMSTRONG XL 15 mm EXPOSED STEEL ANGLE. The tiles should have Humidity Resistance (RH) of 99%, NRC Upto 0.5, Light Reflectance >85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class 0/Class1 (BS 476 Part 6&7) in module size of 600 X 600 X 16 mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38-41% and including taking down ceiling boards. Make :- Armstrong or any other technocommercially equivalent make as approved by GE.
M & L for powder coated GI grid frame work for false ceiling of size 605x605mm, the snap grid shall be of main & cross tee of size 36.5x25x1.4mm (weighing 0.24 Kg/RM) and angle of size 23.5x26.4x1.4mm (weighing 0.191 Kg/RM) fixed to wall with rawl plug and stainless steel screw 50mm 450mm c/c and tied with and incl 4mm dia suspension wire MS @ 1200mm C/C all as specified and directed
M & L for providing Gypsum Board 12mm thick, 600 x 600 mm in size, fixed or laid/ inserted to timber/GI/Aluminium frame work as in ceiling, fixed with screw as per manufacturers instructions complete all as specified and as directed.
M & L for providing Gypsum Board 12mm thick, 600 x 600 mm in size, fixed or laid/ inserted to existing timber/GI/Aluminium frame work as in ceiling, fixed with screw as per manufacturers instructions including taking down ceiling board complete all as specified and as directed.
Taking down chowkats without taking off shutter from chowkats area n.exc 1.5 Sqm each complete all as specified.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified.
Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each complete all as specified.
Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each and re-fixing in the same opening complete all as specified.
M&L 2nd class HW as in plain , solid, straight chowkhats and frames , wrought , framed , rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified
S & F hold fast of flat iron 25 x 3 mm and complete all as specified and directed.
S &F 30mm thick glazed and skeleton shutter of 2nd class hard (Hollock) prepared to receive gauge/glass (without sash bars ) fixed with mitred beeds and securing glass gauge etc sizes of members of shutter as specified in SSR part-1 section-8 ,clause 8.24(a) complete all as specified.
S & F 30 mm thick factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.
S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specifed and as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 and as directed by Engineer in Charge. Note : M&L for 4mm plain sheet glass panes shall be deemed to be included in this item.
S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specifed as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 and as directed by Engineer in Charge. Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm shall be deemed to be included in this item.
S&F factory made steel tubular ventilator with side hung shutter including hinges steel peg stay, complete all as specifed as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 and as directed by Engineer in Charge. Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm & 4mm thick frosted/pin headed glass panes as per requiremet shall be deemed to be included in this item.
S&F 100 x 50mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum. Door frame shall be water proof, termite proof, fire retardant and should have excellent stainless screws holding strength to fix hinges and holding door shutter properly complete all as specified and as directed. Note :- Rate for fixing of frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed shall be deemed to be included in this item. Make : ENCHON (Kumar Arch Tech Pvt Ltd) / FLORESTA / ARCHIDPLY or equivalent as approved by GE (I).
S&F 125 x 63mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum. Door frame shall be water proof, termite proof, fire retardant and should have excellent stainless screws holding strength to fix hinges and holding door shutter properly complete all as specified and as directed. Note :- Rate for fixing of frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed shall be deemed to be included in this item. Make : ENCHON (Kumar Arch Tech Pvt Ltd) / FLORESTA / ARCHIDPLY or equivalent as approved by GE (I).
S&F 30 mm thick factory made WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) Make : ENCHON (Kumar Arch Tech Pvt Ltd) / FLORESTA / ARCHIDPLY or equivalent as approved by GE (I).
S&F factory made wire gauged solid PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be wire gauzed in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmely. Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm shall be deemed to be included in this item.
S & F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, including providing stainless steel wire cloth, 4mm thick plain glass panes, necessary hold fast & MS grills for safety purpose be provided complete all as specified and directed by Engineer-in-Charge. Note: 1. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 2. M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm, 4mm plain sheet glass panes, necessary hold fast shall be deemed to be included in this item. 3. M&L for MS grills shall be provided as directed by Engr-In-Charge and same will be paid separately under relevant items.
M&L for factory made uPVC white colour ventilator. Horizotal frame member is made of profile of required size 88x12mm and vertical member strips are made of 71 mmx28mm with MS pipe stiffener (19x19x0.8mm thk) vertical frame member with help of required size CSK screw and adhesive. Total unit is fixed with help of bracket/fasteners including 4 mm thick frosted glass, MS grills and SS Jalli as per requirement. 1. M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm, 4mm frosted/pin headed sheet glass panes & necessary hold fast shall be deemed to be included in this item. 2. M&L for MS grills shall be provided as directed by Engr-In-Charge and same will be paid separately under relevant items
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube incl suitable metal stifner and fixed with 100 x 8 sheet metal CSK screws complete all specified .
M & L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete as per specification & drawing. Make : Ecocell /Sintex or equivalent as approved by GE(I).
S & F PVC but hinges 100mm size Make Prayag and equivalent and complete all as specified and directed.
S & F PVC handle 150mm size Make Prayag and equivalent and complete all as specified and directed.
S & F PVC tower bolt 150mm size Make Prayag and equivalent and complete all as specified and directed.
M&L for Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
M&L for 4mm thick plain sheet glass ordinary quality and fixed with oil putty in square n.exc 0.5 Sqm in each pane of steel windows complete all as specified.
All as per item No. (76) here-in-before but frosted glass / pin headed glass complete all as specified.
S& F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples and complete all as specified and as directed .
S& F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples and complete all as specified and as directed .
M&L for framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, cooler stands etc conforming to Fe-290 Gde-E-165 complete all as specified..
S & F 100mm size mild steel, butt hinges, medium weight, cold rolled and fixed with mild steel screws as specified.
S & F 100mm size stainless steel, butt hinges, medium weight, and fixed with ss screws complete as directed.
S&F 150mm long barrel tower bolt of aluminium extruded section complete all as specified and directed.
S&F 150mm long handle of aluminium extruded section fabricated anodized type complete all as specified directed.
S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section & fixing bolts and sliding bolts of extruded section complete all as specified and directed.
S&F 150mm floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.
S&F in repairs 300mm mild steel, ordinary rat -tail rod pattern spring including roller and roller plate complete and all as specified and directed
S&F in repairs fency type stainless steel curtain rods of 25 mm dia for doors/ windows etc including SS brackets and SS funnels/dome complete all as specified and as directed.
M&L for Cutting chases, pinning in. making good to facings for concealed water tubing n exc 10cm grith amd making good with cement mortar 1:3 complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store and complete all as specified and directed.
Fixing only of old 15 mm bore steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified
S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified
Fixing only of old 20 mm bore steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified
S&F 20 mm bore galvanized steel tubes medium grade with all fittings laid in walls complete all as specified.
Dismantling PVC water tanks of capacity exc 250 ltr but n exc 500 ltr and removing to store complete all as specified and directed.
Dismantling PVC water tanks of capacity exc 500 ltr but n exc 1000 ltr and removing to store complete all as specified and directed.
S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white colour (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.
S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white color (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide & over 10cm width or girth complete all as specified.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide n.exc 10cm width or girth complete all as specified.
Cleaning and removing all scale and dirt etc from tank of capacity exc 250 and n.exc 500 liters capacity from circulated pipe without damaging of existing float valves including stampring by stencil of date of cleaning by removing old writing complete all as specified.
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed 20mm bore complete all as specified.
S&F in repair 20mm dia Gun - metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed.
S&F stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495mm x420mm, with bowl size 405mmx 355mm x 178mm with including waste coupling, waste pipe complete all as specified and directed (Make " Nirali, blue star or equivalent)
S&F in repair sinks with drainage board of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling.
S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed.Note: Nirali/Blue star/Prayag/Neelkanth as approved by GE (I).
S&F in repair, oval counter type vitreous china wash hand basin of size 56x41 cms, white including waste coupling of PTMT 32 mm.complete all as specified and directed by Engineer- in-Charge
S&F in repair looking Mirror screwing with high quality screw (size 450x600 x 6mm thick fixed with chromium plated brass spacers 25 to 30mm size (one each corner) including rounding the edges complete all as specified. Make : Pryag Cat No-BLM -01 or equivalent as approved by GE(I).
S & F in repairs PVC bath room cabinet of size 535mm x 483mm x 110mm with mirror complete all as specified and as directed.
S & F in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern and making connection with & including CI P/S Trap, etc complete all as specified and directed.
S & F in repair cascade type China ware closet pedastal pattern of superior special colour including fixing bolts, fushing cistern with twin flush fitting and sheet cover of same quality and colour complete all as specified and directed by Engr-in-Charge.
S&F in repair of PVC low level flushing cistern white 10 Ltrs capacity with inlet 15mm bore ball valve, float and handle incl brackets, incl PVC connection 300mm with flanges at both ends screwed down to 15mm bore pipe and 32mm bore PVC flush pipe of required length complete incl taking out of existing flushing cisterns complete all as specified and directed.
S&f in repair stainless steel L-type toilet jet spray with flatted end nozzle including 1.0 mtr SS huge pipe 15mm bore complete all as specified and directed.
S&F in repair toilet paper holder ,chromium plated , complete all as directed Engineer -in-Charge. Make : Pryag Cat No-BA-18 or equivalent as approved by GE(I).
S&F in repair Towel Rack ,chromium plated , complete all as directed.Engineer -in-Charge. Make : Pryag Cat No-BA - 42 or equivalent as approved by GE(I).
S&Fin repair Towel Ring , chromium plated ,complete all as directed by Engineer -in-Charge. Make : Pryag Cat No-Ba-41 or equivalent as approved by GE(I).
S&Fin repair Tumbler Holder , chromium plated ,complete all as directed by Engineer -in-Charge. Make : Pryag Cat No-BA-36 or equivalent as approved by GE(I).
S&Fin repair Soap dish , chromium plated , complete all as directed by Engineer -in-Charge. Make : Pryag Cat No-BA-45 or equivalent as approved by GE(I).
S&F 15mm bore CP fancy type long body bib tap with capstan head fixed as in repair complete all as specified including flange complete all as directed. Make : Hindware/Cera/Plumber/Prayag.
S&F 15mm bore CP fancy type short body bib tap with capstan head fixed as in repair complete all as specified including flange complete all as directed. Make : Hindware/Cera/Plumber/Prayag.
S&F in repair stop valve concealed type 15mm bore of cast copper alloy,fancy type of CP with long shank and cup,high pressure screwed both ends for iron pipe or unions and fixed complete all as directed. Make : Hindware/Cera/Plumber/Prayag.
S&F in repair Angular stop cock 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as directed. Make : Hindware/Cera/Plumber/Prayag.
S&F in repairs pillar taps fency type (ISI marked) cast copper alloy cp with capstan head, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nut screwed for iron pipe of 15mm bore all as directed. Make : Hindware/Cera/Plumber/Prayag.
S&F in repair chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as directed. Make : Hindware/Cera/Plumber/Prayag.
S&F in repair chromium plated hand shower (health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook complete all as specified and directed. Make : Hindware/Cera/Plumber/Prayag.
S &F in repair Wall Mixer, non telephonic shower arrangement with connecting legs & wall flanges complete all as directed. Make : Hindware/Cera/Plumber/Prayag.
S &F 15 mm dia bore fancy type single lever basin mixer with popup waste system & 450 mm long braided houses complete all as specified and as directed. Make : Hindware/Cera/Plumber/Prayag.
S& F in repair CP Sink mixture with swinging casted round shape spout (wall mounted model) with connecting legs &wall flanges. Make : Hindware/Cera/Plumber/Prayag.
S&F in repair chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges incl brackets complete all as directed. Make : Hindware/Cera/Plumber/Prayag.
S&F in repair full glass shelf ,chromium plated , complete all as directed Engr -in-Charge. Pryag Cat No-BEA -45 or equivalent as approved by GE(I).
S&F in repair full Corner shelf ,chromium plated complete all as directed Engineer -in-Charge. Pryag Cat No-BEA -52 or equivalent as approved by GE(I).
S&F stainless steel gratings with hole suitable for 100 mm floor trap complete all as specified and as direcred.
S&F stainless steel gratings with hole suitable for 75mm floor trap complete all as specified and as direcred.
S&F in repair PVC waste pipe 32/40mm dia suitable for Sink/Urinal etc complete all as specified and directed.
S&F in repair PVC connection 450mm long brass chucknut bolt ends for fixing 15mm dia pipe complete all as specified and directed.
Dismantling of boarding, any descripsion, fixed in any position with nails all as specified and directed
M & L 19mm thick coloured MDF board prelaminated both side as in kitchen cabinet including side lipping etc.
Ditto but in shelf and partition etc and complete all as specified and directed.
M & L 100mm size stainless steel hinges auto close type complete all as specified.
M & L 125mm size stainless steel handles complete all as specified.
U.R ASSOCIATES
ASIA BUILDER
JOG CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .