GENERAL FABRICATION,ERECTION AND CONTRACT JOBS

Amount

General Fabricatin and Erection of Contract Job

Dismantling of M.S columns struture , steel staging & platform

Dismantling,Fabrication & Erection of M.S. Columns structure,staging & platform.

Dismantling of various sized Tanks, round & Rectangular and their dragging/ shifting as per instructions.

Fabrication & Erection of M.S. rectangular tank from 6,8,10& 12mm thick plates

Fabrication & Erection of M.S. flat bottom, Round, Tank from 6,8,10& 12mm thick plates

Fabrication & Erection of M.S. conical bottom, Round, Tank from 6,8,10 & 12mm thick plates

Shifting of seed elevator above ground floor

Fabrication & Erection of MS Juice/syrup massecuite/Molasses Gutters from 5,6,8 and 10mm thick plates

Dismantling & shifting/dragging of various sizes of MS pipes above 12” dia

Fabrication & Erection of MS pipe above 12” Dia from 6,8,10mm thick plates

Dismantling of MS Bend/Tee/Reducer/Nipple above 12” dia & shifting/dragging as per instructions

Fabrication & Erection of MS Bend of different sized from 3mm,5mm,6mm,8mm& 10mm thick MS plates above 12” dia

a) Dismantling of various sizes of pipe lines with fitted up to 12” dia (IBR)

b) Dismantling of various sizes of pipe lines with fitted up to 12” dia (Non IBR)

a) Erection of different sizes of pipes up to 12: dia (IBR)

b) Erection of different sizes of pipes up to 12: dia (Non IBR)

Dismantling, Fabrication & Erection of MS Tee from 6mm,8mm,10mm thick

Dismantling, Fabrication & Erection of MS Nipples above 12 “ dia from 6mm,8mm,10mm thick plates

Dismantling, Fabrication & Erection of MS reducer above 12 “ dia from 6mm,8mm,10mm thick plates

a) Fabrication of MS Tee (IBR) up to 12” dia from MS pipe

b) Fabrication of MS Tee (Non IBR) up to 12” dia from MS pipe

a) Fabrication of MS Nipples (IBR) up to 12” dia from MS pipe

b) Fabrication of MS Nipples (Non IBR) up to 12” dia from MS pipes

a) Fabrication of MS reducer (IBR) up to 12” dia from MS pipes

b) Fabrication of MS Reducer (Non IBR) up to 12” dia from MS pipes

Fabrication of MS Bend& Elbow (Non IBR) up to 12” dia from MS pipes

a) Fabrication of MS Cross( IBR) up to 12” dia from MS pipes

b) Fabrication of MS Cross (Non IBR) up to 12” dia from MS pipes

a) Erection of MS Tee (IBR) up to 12 “ dia from MS Pipe

b) Erection of MS Tee (Non IBR) up to 12 “ dia from MS Pip

a) Erection of MS Nipples (IBR) up to 12 “ dia from MS Pipe

b) Erection of MS Nipples (Non IBR) up to 12 “ dia from MS Pipe

a) Erection of MS Reducer (IBR) up to 12 “ dia from MS Pipe

b) Erection of MS Reducer (Non IBR) up to 12 “ dia from MS Pipe

a) Erection of MS Bend & Elbow (IBR) up to 12 “ dia from MS Pipe

b) Erection of MS Bend & Elbow (Non IBR) up to 12 “ dia from MS Pipe

a) Erection of MS Cross (IBR) up to 12 “ dia from MS Pipe

b) Erection of MS Cross (Non IBR) up to 12 “ dia from MS Pipe

Fabrication of MS flange from 10mm to 33mm thick MS plate with duly drilled holes

Dismantling & Fitting of valve above 12”

Dismantling & Fitting of valves up to 12” dia

Dismantling/Fabrication & Erection of worn out side plates of cane carrier//Bagasse Elevator/RBC/Main Bagase carrier and Cross carrier

Dismantling of MS Rain & Shower condenser from position and shifting/dragging in scrap yard

Erection of S.S Condensor in Position and connecting the vapor & water pipes in position as per requirement and trial & testing.

Fabrication & Erection of vapor pipe 1100mm dia for condenser/pans from 10mm thick MS plates.

Dismantling, Fabrication and Erection of worn out of AH molasses tank.

Repair of Juice Sulphiter internal shell, SO2line & Juice line.

Dismantling,Fabrication & Erection of damaged arms of Horizontal crystllizers By M,S strip(spiral type).

Replaced of damaged arms of seed crystllizers.

Dismantling, Fabrication & Erection of Rain Gutter.

Dismantling, Fabrication & Erection of Top plate Dorr clarifier Complete No.3

Dismantling, Fabrication & Erection of Motor pump bed.

Dismantling & Erection of SS pipe

Dismantling, Fabrication & Erection Pan shall with taper portion complete in all respect of pan no. 02 & 05 with trial & testing.

Dismantling, Fabrication & Erection of Horizontal melter

Dismantling, Fabrication & Erection of hopper no. 2 complete & 3 partially with all respect & trial/testing .

Dismantling & fitting of new calindria shell of quad body No.04 with complete trial & testing .

Fitting of S.S tubes,expanding hydraulic testing etc.

Partially Dismantling, Fabrication and erection of both semi kestner ducting.

Repair of top two segment of Molasses tank No.01,02 & 03

MOHD AMIR

MOHD WASIF CONTRACTOR