Estimate for Connecting Defunct Tubewell of PWRMDC (Chak Gujjaran) in Village Chak Gujjaran with Distribution System of Damsal Dam for Recharging Purpose in District, Hoshiarpur, Punjab.

Amount

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation ,watering, including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter Complete in all respect . (a)Earth work upto 1.5 m. Depth for i.All classes of soil except rocky

Excavation in soil (any type) using hydrolic excavation CK90 with hydorlic excavator of 0.9 cum bucket capacity inculding cutting, treaming bottam and slide slope, in accordance with requirement of lines, grades and cross section, including all lift and combined lead upto 30m.

Excavation manually in trenches for pipelines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering, including the cost of dewatering of rain water,diversion for traffic, night signals. Providing & fixing caution boards,watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. (a)Earth work upto 1.5 m. Depth i. All classes of soil except rocky

Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.

Providing, Laying, fixing & jointing of U.P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing Complete in all respect as per Specifications.

110 mm o/d pvc pipe of 2.5 Kgf/Sqcm

160 mm o/d pvc pipe of 2.5 Kgf/Sqcm

Cement concrete 1:4:8 with stone aggregate 40 mm mixing by manual means.

Cement concrete 1:2:4 With stone ballast or shingle, mixing by manual means.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Providing, laying, fixing and testing M.S.pipe lines as per IS-1239 and specials such as tees, bends, sockets, elbows etc. in trenches in the ground including cutting, threading and testing etc complete.(150mm internal diameter, thickness 4.85 mm)

Supplying, Fixing & lowering of Stainless Steel Cage type wire wound screen as per IS:8110-2000 or latest ISI marked Duly welded with suitable grade S.S welding electrode.to lower the strainer into tubewell bore.

150mm Steel Strainer (slot size 0.15/0.20mm) 5.0 mm thickness

Supplying, lowering & fixing of M.S Special socket to connect S.S Strainer to M.S Pipe duly welded with suitable grade welding electrode complete in all respect.

150mm internal diameter

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.

12.5 mm thick cement plaster 1:4

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:-

Second Layer :- Coarse sand screened, cle aned and washed and graded from 3mm to 6mm(from Pathankot or approved equivalent quarry)

Third Layer :- Bajri screened, cleaned and washed and graded from 6mm to 20mm (from Pathankot or approved equivalent quarry).

Fourth Layer :- Bajri (Coarse) screened, cleaned and washed and graded from 20mm to 25mm(from Pathankot or approved equivalent quarry)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer asper IS:1791and vibrated by needle vibrator steel reinforcement excluding centring and shuttering in foundation and plinth. Including steel 60kg/cum

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete with the approval of Engineer in charge. (B)Class PN-1.6 as per ISI (b)100mm i/d Sluice Valves flanged

Steel Work fixed independently without connected plates Including cutting hoisting and fixing in position including supply, carriage etc. of all materials. (b) Flats

Drilling Hole and Connecting MS pipe with of existing bore hole pipe including cutting and jointing complete in all respect as per Instructions of Engineer-in-Charge.

Supplying and fixing UPVC Equal Tee of 4Kgf/cm2 pressure confirming to relevant IS Codes with latest Ammendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.

Supplying and Fixing uPVC Reducer of 4kgf/cm2 Pressure confirming to relevant IS Code with latest Ammendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.

Supplying and Fixing Upvc 90 Degree Bend of 4kgf/cm2 Pressure confirming to relevant IS Code with latest Ammendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.

Supplying and Fixing Upvc Socket of 4kgf/cm2 Pressure confirming to relevant IS Code with latest Ammendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.

Supplying and Fixing of Cast Iron Flanges confirming to relevant code with latest Amendments if Any at Site. Complete in all respect as per P.W.D Specifications and Instructions of Engineer-in-charge.

Supplying and Fixing of MS Clamps confirming to relevant code with latest Amendments if Any at Site. Complete in all respect as per P.W.D Specifications and Instructions of Engineer-in-charge.

Supplying and Fixing of Mechanical Flowmeter ( 110 mm) confirming to relevant code with latest Amendments if Any at Site. Complete in all respect as per P.W.D Specifications and Instructions of Engineer-in-charge.