Providing Octogonal Street light pole on the Kuntikana flyover on National Highway 66 from Kodikal Junction to Malemar road cross in MCC limits

Providing Octogonal Street light pole on the Kuntikana flyover on National Highway 66 from Kodikal Junction to Malemar road cross in MCC limits

Fabricated galvanised steel streetlight(octagonal) pole retro fit bracket: The edges of 2 Steel plates of measure 310x310x16mm each that meet to be ground at 45 degrees, weld together at an angle of 9...

Concrete Horizontal Core Drilling: Making a horizontal hole of depth up to 18’’ and up to 01’’ Dia by core drilling the concrete parapet wall of flyover/bridge or concrete road structure, usin...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for outdoor luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. - Single Arm Bracket with 1500 mm Stan...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

8 SWG GI Wire as per IS-2141 (4.064 mm Dia), Std Wt: 131 Kg/KM 9m Octogonal Pole - 18 Nos. x 31m

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 10 Sqm...

Heavy Gauge PVC Conduit Pipe confirming to IS 9537- Part III (1983) - 40 mm dia 2.5 mm thick 9m Octogonal Pole - 18 Nos. x 32m + 32m.

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - LT Cable - 2.5 to 25 Sqmm 9m Octogonal Pole - 18 Nos. x 30m +...

Digging of Pit for providing GI Pipe type Earthing

Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Heat shrinkable Type Terminations for LT UG Cable - 2.5 to 25 Sqmm

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. - 63 A

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. - (0.55mx0.55m) = 3025.00sq...

Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. - 50 A

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.