Loading
Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹30.0 L Per unit ₹3,315.80–₹4,46,040.00 | ₹30.0 L Per unit ₹3,315.80–₹4,46,040.00 |
Tender Value
Refer Docs
Closing Date
20 Jul 2026, 11:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
LP
1 condition
(1) OEM Authorization Certificate must be submitted along with Offer. (2) Dealers/Agents quoting on behalf of an OEM must submit Authorization from OEM, failing which their offer will be summarily rejected.
16 conditions
Bidders claiming to avail benefits and preferential treatment extended to Micro and Small Enterprises [MSEs] should necessarily enclose relevant documents against this clause itself. Documents attached anywhere else will not be considered for purchase preference at all.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
TPI at OEM Premises
Non responsive offers WITH DP LONGER THAN THE TENDER will be liable to be summarily rejected and will be passed over.
1 condition
Validity of offers: Offers should be valid for 90 days after closing date of tender. Any offer having lesser validity shall be deemed as commercially unresponsive and will be summarily rejected
6 locations across Bihar, West Bengal · 23 Numbers · 18 Set total
(1) Supply of Contact wire cutter 36 inch, heavy duty, suitable to cut copper contact wire 107 sq. mm Make: TAPARIA or similar Accepted Make: INGCO POWER (2) Contact wire splicing jig suitable to splice 107 sq mm contact wire ,Make: I.M,P.E.C, S.S.T Engineers and Trader or similar, Accepted Make : Own (3) Spanner set consisting of 4 sets of double ended Ring spanner & 4 sets of double ended flat type spanner,12 pieces in each set(6 mm to 42 mm size), Gedore or Taparia make with ISI Mark or as approved by engineer. (4) Supply, testing & commissioning of GEARLESS HAND OPERATED PULLING AHD LIFTING MACHINE 1.6 T0NNE CAPACITY (TIRF0R), LIFTING 1.6 TAND PIILLIHG 2.6 T CAPACITY WITH TELESCOPIC 0PER4TlliG HANDLE with 20 Mtr. ROPE LINGTH ISI Marked all as per Roso spec. No. TI/SPC/0HE/TOOLPL/ 0991 or latest Make- CORE/RDSO approved. (5) GEARLESS HAND OPEARATED PULLING AND LIFTING MACHINE 1.6 TONNE CAPACITY (TIRFOR), LIFTING 1.6 T AND PULLING 2.6 T CAPACITY WITH (6) RACHET LEVER HOIST (PULL LIFT) OF 0.8 TON CAPACITY AS PER RDSO SPECIFICATION No. TI/SPC/OHE/TOOLPL/1991 or latest. Make- CORE approved (7) Earth Auger 4-MIX/4- STROKE PETROL ENGINE ONE MAN EARTH AUGER WITH QUICJK STOP BREAKDISPLACEMENT : 36.3CM3 POWER OUTPUT : 1:9HP VIBERATION LEVEL. LEFTRIGHT 2.2/2.5 M/42 SPINDLE SPEED200 RPM, ENGINE (8) Supply and commissioning of Inverter based hand plasma cutting machine with hand cutting torch with cables of overall length 15.2 mtrs. with suitable inbuilt/portable (9) Hand Held 200 KHz Digital Multimeter Brand: RISHABH (Detailed Description/Spec. as per Product #1 of GeM Contract No. GEMC-511687719324867 dt. 10/03/2025) (10) Supply & testing of 10 kVA, 25KV/240 Volt single phase oil filled auxiliary transformer as per RDSO Specification No. ETI/PSI/15(8/03) or latest revision if any.
KT265430
KT265430
Limited - Indigenous
Goods
Dinajpur Uttar, West Bengal
₹0
Exempted
16 Sept 2026
15 Jul 2026
10 items · 23 Numbers · 18 Set total
Hand Held 200 KHz Digital Multimeter Brand: RISHABH (Detailed Description/Spec. as per Pro duct #1 of GeM Contract No. GEMC-511687719324867 dt. 10/03/2025) [ Warranty Period: 30 Months aft er the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/IC/TRD/ARR, NFR | Bihar | 3.00 Numbers |
| Total | 3 Numbers | |
Supply & testing of 10 kVA, 25KV/240 Volt single phase oil filled auxiliary transformer as per RDSO Specification No. ETI/PSI/15(8/03) or latest revision if any. [ Warranty Period: 30 Months after the d ate of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/IC, Traction Distribution, Dalkhola., NFR | West Bengal | 10.00 Numbers |
| Total | 10 Numbers | |
Supply, testing & commissioning of GEARLESS HAND OPERATED PULLING AHD LIFTING MACH INE 1.6 T0NNE CAPACITY (TIRF0R), LIFTING 1.6 TAND PIILLIHG 2.6 T CAPACITY WITH TELESCOPIC 0PER4Tlli G HANDLE with 20 Mtr. ROPE LINGTH ISI Marked all as per Roso spec. No. TI/SPC/0HE/TOOLPL/ 0991 or late st Make- CORE/RDSO approved. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/IC, Traction Distribution, Dalkhola., NFR | West Bengal | 6.00 Set |
| Total | 6 Set | |
GEARLESS HAND OPEARATED PULLING AND LIFTING MACHINE 1.6 TONNE CAPACITY (TIRFOR ), LIFTING 1.6 T AND PULLING 2.6 T CAPACITY WITH TELESCOPIC OPERATING HANDLE with 20 mtr ROPE LE NGTH ISI MARKED, all as per RDSO SPEC. No. TI/SPC/OHE/TOOLPL/1991 or latest. Make-CORE approved [ W arranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/IC/TDR/KIR, NFR | Bihar | 2.00 Set |
| Total | 2 Set | |
Supply of Contact wire cutter 36 inch, heavy duty, suitable to cut copper contact wire 107 sq . mm Make: TAPARIA or similar Accepted Make: INGCO POWER [ Warranty Period: 30 Months after the da te of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/IC/TRD/ARR, NFR | Bihar | 3.00 Numbers |
| Total | 3 Numbers | |
Contact wire splicing jig suitable to splice 107 sq mm contact wire ,Make: I.M,P.E.C, S.S.T Eng ineers and Trader or similar, Accepted Make : Own [ Warranty Period: 30 Months after the date of deliver y ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/IC/TRD/ARR, NFR | Bihar | 2.00 Numbers |
| Total | 2 Numbers | |
RACHET LEVER HOIST (PULL LIFT) OF 0.8 TON CAPACITY AS PER RDSO SPECIFICATION No. TI/ SPC/OHE/TOOLPL/1991 or latest. Make- CORE approved [ Warranty Period: 30 Months after the date of d elivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/IC/TDR/KIR, NFR | Bihar | 2.00 Numbers |
| Total | 2 Numbers | |
Spanner set consisting of 4 sets of double ended Ring spanner & 4 sets of double ended flat t ype spanner,12 pieces in each set(6 mm to 42 mm size), Gedore or Taparia make with ISI Mark or as appro ved by engineer. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/IC/TRD/ARR, NFR | Bihar | 10.00 Set |
| Total | 10 Set | |
Earth Auger 4-MIX/4-STROKE PETROL ENGINE ONE MAN EARTH AUGER WITH QUICJK STOP BR EAKDISPLACEMENT : 36.3CM3 POWER OUTPUT : 1:9HP VIBERATION LEVEL. LEFTRIGHT 2.2/2.5 M/42 SPINDL E SPEED200 RPM, ENGINE TORQUE1.7Nm. SPINDLE TORQUE 81Nm, DRY WEIGHT 10.0KG, ACCESSORIES, O NEDRILLINGBIT 200 MM DIAMETER LENGTH 695 MM AND EXTENSION 450 MM. MODEL : BT131 MAKE- STHIL /Makita/Bosch/Hitachi/ OR SIMILAR Note :- Suitable/Similar brand as per above required description. [ Warr anty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/IC/TDR/KIR, NFR | Bihar | 2.00 Numbers |
| Total | 2 Numbers | |
Supply and commissioning of Inverter based hand plasma cutting machine with hand cutting torch with cables of overall length 15.2 mtrs. with suitable inbuilt/portable Air compressor as per detailed s pecification enclosed note :- firm should submit authorised dealership certificate or proof of purchase from OEM along with tender item to be supplied along with warranty certificate. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/IC/TDR/KIR, NFR | Bihar | 1.00 Numbers |
| Total | 1 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5841408.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .