Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹2.0 L+₹9,739.50 (5.07%)Rejected-Finance | L2 | Rejected-Finance Reject L2 | |
| 3 | Not Admitted-PreQual/Technical | - | Not Admitted-PreQual/Technical Not Complied with technical specification |
Tender Value
₹2.9 L
EMD Value
₹5,000
Closing Date
8 Feb 2021, 12:30 pmClosed
Shri gorelalsingh DGM STC vidisha
Ahamadpur Road Circle office MPMKVVCL Vidisha
Estimate for providing 02 Nos 10 HP connection for Nurseries to forest extension officer unit raise in Village Amrawad Dam under Raisen R DC
2021_MKVVC_124175_1
DY/GM/STC/Work/4209 dt 15.01.2021
Open Tender
Electrical Works
Item Rate
30 days
extension officer unit raise in Village Amrawad
Estimate for providing 02 Nos 10 HP connection for Nurseries to forest extension officer unit raise in Village Amrawad Dam under Raisen R DC
10 documents required · 10 mandatory
₹300
Yes
₹5,000
Yes
9 Aug 2021
15 Jan 2021
9 Feb 2021
15 Jan 2021
8 Feb 2021
15 Jan 2021
Electrical Items :
Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box
Meter cum protection box for 25 KVA DTR
Three Phase Service connection box incoming up to 35 mm2 and 4 no outgoing16mm2
Back filling of poles with boulders.1
G.I. WIRES 5.0 MM. (6 SWG)
G.I. WIRES 4.0 MM. (8 SWG)1
STAY GI WIRE 7/4.00 MM.(7/8 SWG)
Anti climbing devices
STAY WIRE 7/3.15 MM.(7/10 SWG)
Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire
Galvanized nut & bolt with washer
Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole
M.S.Nuts and Bolts
A.B Cable hanging clamps/ tension clamps (Galvanized) as per enclosed Drawing
Suspension Clamp for LT AB cable
Clamps for neutral for AB Cable
Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor
Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor
Piercing connector Type-I for 1P/3P (Main 16-50 sqmm tap-off 16-50 sqmm)
Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)
Aluminium binding wire and tape
11 KV Bridling cross arms 65x65x6mm
H.Beam Back Clamps 65x8mm Flat(in Numbers)
Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm
11 KV Bridling top clamps 65x65x6mm
Clamp for 140 Kg PCC Pole MS Flat 50x6 mm1
D.C. Cross-arms 8' Channel (100x50x6mm)
Transformer mounting Channel (100X50x6 mm.)
Trans.Mounting with Belting with 50X50X6 mm.angle with two cross fixing channel
D.O.Mounting channel 75x40x6 mm
Stay set complete without Stay wire 16 mm. (Painted)
Stay set 20 mm. complete without Stay wire (Painted)
H.Beam Clamps 65x8mm Flat
I. Bolts 16 mm
11 KV Single pole cut point fitting 100x50x6 mm channel
11 KV Guarding channel 75x40x6 mm
Danger Boards Enamelled 11 KV
Stay Insulators 90X65mm
Red oxide paint
Aluminium paint
Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay
Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay
Concreting of PCC pole @ 0.30 Cmt per pole for base padding for DP/TP etc
Concreting of Rail / Hbeam supports @0.65 Cmt.per pole including muffing of pole
DTR S/s fencing (31 feet) of 5' barbet fencing on PCC support of 7No, 6' Height
Double Gate (2No-2.5'x5x) set of MS angle (25x25x4mm) with mesh & locking
CHEM ROD 50MM DIA.AND 2000 MM LONG
G.I. STRIP 25X3 MM1
Stone Block/Pre cast block for base pedding (450X450X75MM)
Excavation in Hard Rock (controlled blasting)..upto 1000 metres )
Labour and Transportation charge and CGST@ 9% and SGST@9%
MS YASHPAL SINGH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .