PROVN OF CONVERSION OF OVERHEAD HT LINE INTO UNDERGROUND CABLE INCL ALLIED WORKS AT JASAI MIL STN UNDER GE (ARMY) BARMER.

Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for OUTDOOR termination Heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 95 sq mm complete.

Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for STRAIGHT THROUGH Heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 95 sq mm complete.

M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plugs, bolts, nuts & screws as specified type 410 SP-55, 11.0 meter long inclusive of one primer coat of red oxide zinc chrome primer and two coats of aluminium paint incl preparation of surfaces complete all as specified and directed. The poles shall confirm to IS - 2713 & each component pipe shall be ISI Marked & confirm to IS - 1161. NOTE : Necessary earthwork, PCC etc. shall be measured & paid separately under relevant items of work.

M&L for cross arms bracings supports, clamps and back plates fabricated from structural steel sections incl nuts, bolts, washers welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat of red oxide zinc chrome primer and two coats of aluminium paint incl preparation of surfaces complete.

M&L for anti-climbing devices, comprising of 2.24 mm dia galvanised steel 2-strand barbed wire with 2.00 mm dia barbs wrapped spirally round poles, to a length of 0.5 mtr to 1.0 mtr clamped & properly secured or as specified & as directed (clamps measured separately).

M&L for Pin type porcelain, vitreous, white, brown or green insulators inlcuding one GI spindle, two galvanized iron washers and one galvanized iron nut, 150 mm dia & 150 mm height suitable for working pressure 11 KV complete all as specified and as directed by Engr-in-charge.

M&L Disc type, porcelain, vitreous, 145mm High and 255mm dia ball and socket type white, brown or green insulator single disc assembly for tension with tension clamps for conductors, working pressurer 11000 volts grade complete all as specified and as directed by the Engr-in-Charge/GE.

Supply, install, testing & commissioning of gang operated device (GOD), triple pole, current rating 400 Amps, HT 11 KV vertical, mechanically operated mounted on insulators and steel frame with operating mechanism operated from ground with and including jumper connections with suitable size & type ACSR conductor along with PVC pipe covering with colour code between main supply and GOD incl taking down old existing one complete all as specified and as directed by the Engr-in-Charge/GE.

M&L for swing out expulsion fuse single pole (Drop Out Fuse) with fuse carrier , fuse element mounted on insulator & fitted on steel frame etc for 11000 volts of capacity (25-50) amps incl taking down old existing one complete all as specified and as directed by the Engr-in-Charge/GE.

S&F lightening arrester non-linear metal oxide type, complete with all fittings, transmission/distribution class, discharge capacity 65 Kilo amps suitable for 11 KV out door type including necessary connection and fittings all as per IS-3070 Part-III and IEC 1994 including dismantling of old unsv lightening arrestor including strap bolts, nuts and washers etc. complete all as specified and as directed by the Engr-in-Charge/GE. Make : ELPRO/OBLUM/JAIPURIA BROS/PACTIL

S&F danger notice plate of size 25 x 20cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventioinal skull and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for HT conforming to IS-2551 complete.

M&L for cement concrete in foundation, filling mass concrete type-C2, 1:3:6, (40mm graded aggregate) for pole foundation & finishing the surface even & smooth without using extra cement incl necessary formwork complete all as specified & as directed.

M&L for PCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) for coping of poles etc & finishing the surface even & smooth without using extra cement incl necessary formwork complete all as specified & as directed.

M&L for aluminium conductor steel reinforced (ACSR) for jumpering of HT Line along with connecting accessories complete all as specified and directed by Engr-in-charge.

M&L for stay assembely with stay rod of dia 20mm with accessories as shown in electric plate No. 1 complete all as specified and directed by Engr-in-charge.( loop type insulator, excavation and concrete shall be measured and paid separately)

M&L for cable route indicator using RCC post 1.20 mtr long, top 100 x 100 mm & bottom 200 x 200 mm, with height not less than 50 cm above GL with engraved marking " MES HT CABLE " in bold letters during refilling of the trench complete. NOTE : The spacing between two consecutive cable route indicators shall not be more than 50.0 meters & also shall be provided at each & every bend or corner.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Each Set

Each Set

Please Enable Macros to View BoQ information