Upgradation of Auditorium Hall at CIBS Leh.Under (District Capex)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and fal ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer-in-charge.

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1 cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 Cement :3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class Kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class Kail wood

Providing and fixing Wooden Acoustic doors including necessary accessories complete job.

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frameto be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge Extruded section profile size 48x40 mm

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVCprofiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, outof which 75 mm shall be flat and 20mm shall be tapered (on both side), having one side thickness of 16mm integrally extruded on the hinge side of the profile for better screw holding power, includingreinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & jointwith the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket osize 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single pieceextruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 21mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded,fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm,including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, allcomplete as per manufacturer's specification and direction of Engineer-in-charge. Decorative finish (wood grained finish)

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windowscomprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profilesduly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated)casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plasticcaps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusionwelded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wallshall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes andsilicon sealant shall be paid separately). Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (smal l series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window upto 2.50 sqm).

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, 5.5 mm thick glass panes

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvatrure (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, faserners etc).

Providign and fixing 12mm thick commercial ply conforming to IS : 1328 BWR type in base for wall panelling

Providing and fixing 100mm pine wood plain lining tongued and grooved, including wooden plugs compete with necessary secrew and priming coat on unexposed surface 10mm thick

French spirit polishing : Two or more coats on new works including a coat of wood filler

Providing and applying white cement based wall putty of avg. 1mm of approved brand and manifuture

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer

Finishing walls with Deluxe Multi surface paint system for interiors and exteriorsusing Primer as permanufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing MS Gratings

Providing and fixing of Sign Board (30'0"x5'-0")

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for : a) Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

b) Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Random rubble masonry with hard stone laid dry in foundation, plinth & walls Laid with bond stone

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:6 (1 cement: 6 fine sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate

Carriage of material from source to site by MT including, loading, unloading and stacking complete job. a) Stone Agg. Below 40mm size Avg 10km

b) Sand an Avg. lead of 10km

c) Stone an Avg lead of10 km

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Chajge. (Concealed work including cutting chases and making good the walls etc.,) a) PN-16 Pipe, 25 mm OD (SDR-7.4)

b) PN-16 Pipe, 40 mm OD (SDR-7.4)

c) PN - 10 Pipe, 50mm OD (SDR-11)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c trenching .refilling & testing of joints complete as per direction of Engineer in Charge. (External work) PN - 10 Pipe, 63 mm OD (SDR-11)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 65 mm nominal bore

Providing and fixing ball valve PPR of approved quality complete. a) 25mm dia OD

b) 40mm dia

c) 50mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440gms.

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing 15mm nominal bore of standard back type C.P brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps compete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder : C.P. brass

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing in position PVC P or S traps

Providing and fixing PVC floor traps a) 100mm dia

Providing and fixing soil, waste and vent pipes 1mm thick a) PVC S&S pipe (150mm dia)

b) PVC S&S pipe (100mm dia)

c) PVC S&S pipe (75mm dia)

d) PVC S&S pipe (50mm dia)

PVC Cowell 50mm dia

Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter : a) 100 mm

Providing and fixing bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes a) 100mm

Providing and fixing plain bends a) 100mm

Providing and fixing the joints with spun yarn, cement slurry and cement mortar 1:2 a)100mm

Providing and fixing Tee-junction of required degree with access door, inserted rubber washer 3mm thick, bolts and nuts compete. 100x100x100 PVC 1mm a)100mm

Providing and fixing PVC Reducer 100-50mm dia

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105gms

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing master trap

Providign and fixing 5 H.P C.G Motar, including all fitting 2no ball value, non return value vertical/ horizontal, shelter, base, electric pannel switch board with DP MCB 20amp

Providing and fixing of material for the insulation of Water Storage Tank of with nitrile sheet , tapping with cello tape , Rockwood 6 inch per side, wire mesh, polythene , aluminum sheet 26 gauge cladding with dia of , complete job. 19 mm thick nitrile sheet

Providing and fixing heat tape 33Watt on PPR pipes made of denforced or chromelox or equivalent make, as approved by Engineer InCharge , complete Job

Providing and fixing of material for the insulation of pipe with nitrile tube , tapping with cello tape for inner wall fittings . complete job including carriage. 19 mm thick, 50 mm dia (OD) ( PPR 25 mmm)

Providing and fixing of material for the insulation of pipe with nitrile tube , tapping with cello tape , Rockwood 6 inch per side, wire mesh, polythene , tapping with cello tape aluminum sheet 26 gauge cladding with dia . complete job including carriage. A)19 mm thick, 50 mm dia (OD) ( PPR 40 mmm) 1695

b) 19 mm thick, 50 mm dia (OD) ( PPR 50 mmm)

Providing and fixing Gysers make (Venus, Recold) a)50 Litre for Wash Room

Supply, of ISI marked ahmininus conductor XLPE inmulated sable as per 15 7098, un artsosed, servesd, sheathed 1100 volts grade. 185 sqmm 3.1/2 core (Main) a) 120 sqmm 3 1/2 crore

b) 95 sqmm 3 1/2 crore

Laying of one number PVC mulated and PVC shatbed/XLPE power cable of 1.1 71 KV grade of following size direct in ground including excrvation, sand cushioning protective covering and refilling the trench etc as required a) Above 35 sq nam and upto 95 sq mm

b) Above 95 sq. mem and upto 185 sq. man

Supplying and making end termination with brass compression glands of following 9.1 sires of 1.1. kv grade multicore aluminium conductor PVC insulated and PVC Sheathed a) 3½ X 95q. man Omm) (38mm)

b) 3½X 120sq. mm (45mm)

Supplying and fixing 6 A to 32 A rating, 240/415 V. 10 LA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB fcomplete with comections, testing and commissioning ete, as required a) single pole

b) Double pole

Supplying and fixing 40-63 A rating, 240/415 V. "C-curve, miniature circuit NS breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning eto. Double pole

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the jexisting MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 way (4 + 18), Double door

b) 8 way (4 + 24), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 way , Double door

b) 8 way , Double door

c) 12 way , Double door

c) 16 way, Double door

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. a) 100 mm width X 50 mm depth X 1.6 mm thickness

b) 150 mm width X 50 mm depth X 1.6 mm thickness

c) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. a) 100 mm width X 50 mm depth X 1.6 mm thickness

b) 150 mm width X 50 mm depth X 1.6 mm thickness

c) 300 mm width X 50 mm depth X 1.6 mm thickness

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

e) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

f) 2 X 16 sq. mm + 1 X 6 sq. mm earth wire

g) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group A

b) Group B

Providing and fixing of inverter/ UPS power pointpower point (in loop) with 1.5 sq. mm PVC insulated copper wire, through midium classPVC Conduit pipe with all necessary accessories i/c 6Amp switches, 5 Amp 3-pin socket 2 nos recessed in wall NS covered with Modular Plates i/c Modular Box & MS boxof required size i/c 1.5 sq.mm 50 PVC Insulated copper wire of FRLS as earth wire, Point taken up to DB duly tested and commissioned

Providing and fixing of Heating points using 4 sq.mmPVC insulated copper wire of FRLS through 1" 2mm heavy duty PVC conduit and providing and fixing of 6/16 Amp. of Modular Switch, socket recessed in wall covered with modular sheet/ MS box NS of required size including providing and fixing of 4mm² PVC insulated copper wire 36 as earth wire, point taken up to D.B. duly tested and commissioned, complete point in points all respets note: all items included like Conduit, wire, MS box, switches etc.

Providing and fixing of AC points using 4 sq.mmPVC insulated copper wire of FRLS through 1" 2mm heavy duty PVC conduit and providing and fixing of 6/16 Amp. of Modular C-curve MCB, socket recessed in wall covered with modular sheet/ MS box NS Jat two levels of required size including providing and fixing of 4mm² PVC insulated 12 copper wire as earth wire, point taken up to D.B. duly tested and commissioned, complete point in all respets points note: all items included like Conduit, wize, MS box, switches etc.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supply of 2 ft LED slim 9-12 watt warm 110m/w 230 Batten type lights (T5 Type) complete in all respects. Wipro, LT, PHILIPS

Supply of 4 ft LED slim 20 watt warm 110lm/w 230V Batten type (T5 Type) complete in all respects Wipro, LT, PHILIPS

Supply of 12 watt CCT 6000/6500 K suface/recess LED slim 230V, complete in all respects. (connertial) Wipro, LT, PHILIPS

Supply of 15 watt CCT 6000/6500 K suface/recess LED slim 230V, complete in all respects. (connertial) Wipro, LT, PHILIPS

Supply of 24 watt CCT 6000/6500 K suface/recess LED slim 230V, complete in all respects. (commertial) Wipro, LT, PHILIPS

Supply of 2ft x 2ft 30 watt CCT 5700K suface/recess LED slim 230V, complete in all respects. (commertial) Wipro, LT, PHILIPS

supply of 2ft x 2ft VERGE TYPE recessed/surface mounted luminaire with minimalastic design, integrates ito the ceiling, volumateric lighting 33 watt, CCT 5700k surface/recess LED slim 230V, complete in all respects. (commertial) verge/LM29 of wipro for refferance. (5 ingeomatery 20 at position in the hall) Wipro, LT, PHILIPS

Supply, fixing of 3W LED undirectional exist signage light with inbuilt 2 hrs battery back up.

Supply of LED square gimaball TWIN TYPE luminaries CCT (K) 3000, cut out dimentions 230mm x 120mm 40watt beam angle 24 deg, 36deg. Triple headed Wipro LD 58 for reference. Wipro, LT, PHILIPS

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Supply, testing of 9" x 9" flap window type exhaust fan complete withall accessories etc Crompton, Halonix, Havells, Usha

Supply, installation, testing and commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with brush less direct current (BLDC) motor, class of insulation: B, 3nos. Blades, 30cm long down rod, 2nos. Canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CM/M/W) minimum 6.00, Air delivery minimym 210 cum/min, 350 RPM (tolerance as per IS: 374-2019), THD less than10%, remote with cells or electronic regulator unit for speed control and all remaining accessories including safety pin nut bolts, washers, temperature rise= 75degree C (max), insulation resistance more than 2 mega ohm, suitable for 230v, 50Hz, single phase AC supply, earthing etc. complete as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 15/16 A switch

b) 6 pin 15/16 A socket outlet

c) 5/6 A switch

d) 3 pin 5/6 A socket outlet

e) Supplying and fixing of 15/16 A 3pin Top

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. A) 1 or 2 Module (75mmX75mm)

b) 3 Module (100mmX75mm)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying of 1000mm wide, 2000mm length, 1.1Kv grade, antiskid rubber mat, as per IS 15652-2006 and of reputed make to be spread in front of the 415 V switchgear panels

Supplying, fixing of shock tratment chart (prescribed under I.E. reles) duly framed with glass and supported from back withhard board with supply of all material labour T&P etc for proper completion of work. (Approx front area= 1.20sqm).

Supplying, installation, testing & commissioning of 200 watt IP 66 LED flood light 230v, complete in all respects. (commercial). Outside illuminaltion Wipro, Halonix, Havells

Supply, installation, testing & commissioning of 150watt IP 66 LED flood light 230V, complete in all respects. (commercial). IN side illumination indirect. Wipro, Halonix, Havells

Supplying, laying, terminating of ISI marked Copper power cable conductor Extruded PVC type ST2 Outer sheathed, 650V/1100V grade as per IS 7098 (part I) 1988 a) 3C x 4 sqmm emergency FF lights

b) 3C x 6 sqmm Exhaust system/loop to FF lights

c) 3C x 4 sqmm lighting FF/field lights

Providing and fixing of lightning conductor final, made of 25mm dia 100cm with three prongs long, G.I. tube, having single prong at top, with 85mm dia 6mm thick GFI insulated base plate including holes etc. complete as per required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing, fixing and Cladding with 3 mm thick matt finish Aluminium composite panel with all fixing arrangements to cover the pipe line/ finishing etc.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying, fixing, testing and commissioning of following Amperes of MCCBs with spreader links 125 A,36KA,FPMCCB

Providing and fixing of 100 MCB Sheet steel Enclosure

Supply, installation, testing & commissioning of 2.5 kVA 1 phase Inverter with 3x200AH 12V tubuler Batteries including suitable rack, input/output leads/ Switch sockets etc. to make the system operational. Note: Item Should have minimum of two years Warrenty and free service.

Providing and fixing modular PVC Modulebox with 32 A MCB and 6 pin 32 A socket outlet combine of reputed make/ as per approval (INV i/p &o/p)

Providing and fixing 63 MCB type Change over switch with Enclosure

Supply, fixing, Testing, commissioning of Wall Mount Rack - 6U 550 W x 450 D Specification, Conforms to DIN 41494 OR equivalent ISO Standards. Front Glass Door (tinted, Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails with U-Marking. Welded to Frame Top and Bottom Cover, Vented and Field Cable entry exit cut outs UL Certified. Standard Accessories: 1U Cable Manager (1), Hardware Pkt of 20 (1 Pkt). 6 Socket 5 Amp. Power Distribution Unit (1 No) Roof Mounted Fan Unit / 90 CFM /230V AC (1 No). Standard Color : Grey, Static Load : 40 kgs

Supply, Installation, testing & commissioning of CAT6 UTP Patch Cord – 3M Specifications: Features Category 6 Equipment cords, he work area equipment cords shall, at a minimum comply with proposed ANSI/TIA/EIA-568-C.2 Commercial Building Cabling Standards Transmission Performance Specifications for 4 pair 100W Category 6 Cabling, Equipped with modular 8-position modular plugs on both ends, wired straight through with standards compliant wiring, Should have 50 micrinches of gold plating over nickel contacts, Should be covered by ETL verification program for compliance with TIA 568.C.2 , Mechanical : Cable Conductor size: 24 AWG stranded bare copper, Max O.D.: 5.6mm (.22”), Jacket: PVC UL-94V-O, Temperature range: -10oC t+80oC, echanical Characteristics – Plug Operating life: Minimum 750 insertion cycles, Contact blade: Phosphor bronze, Contact plating: 50µ” Gold, Plug dimensions & tolerances compliant with FCC Part 68.500 and IEC 60603-7, Approvals: UL 444 for copper conductor , Operating life: Minimum 750 insertion cycles, Electrical Characteristics – Plug Diélectrique with standing voltage :500 V AC, insolation résistance : 35 M Ohm (Max), Operating temperature: -10oC t80oC

Supply, Installation, testing & commissioning of CAT6 UTP Patch Cord – 1M Specifications: Features Category 6 Equipment cords, he work area equipment cords shall, at a minimum comply with proposed ANSI/TIA/EIA-568-C.2 Commercial Building Cabling Standards Transmission Performance Specifications for 4 pair 100W Category 6 Cabling, Equipped with modular 8-position modular plugs on both ends, wired straight through with standards compliant wiring, Should have 50 micrinches of gold plating over nickel contacts, Should be covered by ETL verification program for compliance with TIA 568.C.2 , Mechanical : Cable Conductor size: 24 AWG stranded bare copper, Max O.D.: 5.6mm (.22”), Jacket: PVC UL-94V-O, Temperature range: -10oC t+80oC, echanical Characteristics – Plug Operating life: Minimum 750 insertion cycles, Contact blade: Phosphor bronze, Contact plating: 50µ” Gold, Plug dimensions & tolerances compliant with FCC Part 68.500 and IEC 60603-7, Approvals: UL 444 for copper conductor , Operating life: Minimum 750 insertion cycles, Electrical Characteristics – Plug Diélectrique with standing voltage :500 V AC, insolation résistance : 35 M Ohm (Max), Operating temperature: -10oC t80oC

Support for the Energy Efficient Ethernet (IEEE 802.3az) standard. Power input should be 100 to 240 VAC, 50/60 Hz, internal power supply. Power Saving (Green) Operating temperature should be -5 degree celsius to +50 degree celsius. EMI Certificate - CE, FCC/IEC and SAFETY Certificate - CB/ UL. Switch Software SpecificationShould support Head of Line blocking prevention for lower latency and better performance.Support Jumbo Frame up to 12K Bytes or higher. Should support IGMP Snooping, Able to create 250 or more IGMP groups and require support for IGMP Snooping Fast Leave,IGMP Snooping Querier Should support MLD Snooping, Able to create 250 or more MLD groups, Per VLAN MLD Snooping and require support for MLD Snooping Fast Leave. Link Aggregation LACP 802.3ad: Minimum 8 groups per device and 8 ports per group Port Mirroring : One-to-One / Many-to-OneSwitch Should Support Access Control List based on (ACL's) 802.1p priority, VLAN, MAC address, Ether type, IP address, DSCP, Protocol type, TCP/UDP port number, IPv6 Traffic Class, Max. ACL Profiles / Rules: 50 / 768Should have 802.1D STP, 802.1w RSTP and 802.1s MSTP Spanning Tree Protocol. Should support Spanning tree Root restriction Should support Loopback detection (LBD) to detect the loop created by a specific port. Should support Multicast Filtering to filters or forward all unregistered groups. Switch should support IEEE 802.1Q VLAN tagging for Ethernet frames. Different type of VLAN like Port based, Auto Surveillance, Auto Voice, Asymmetric Vlan etc. should be available for configuration. Switch should support QoS (quality of service) IEEE 802.1P for traffic prioritization. It should support 8 queues per port.Different type of QoS priority like Strict Priority Queue and Weighted Round Robin.Port based ingress / egress rate limit function should be available with limit in increments as low as 16 Kbps Switch should support Neighbor Discovery (ND) protocol for IPv6. Switch should support to create atleast 4 IP interface Should support default routing and static routing with minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries. Support at least 700 rules shared by IPv4, MAC, and IPv6 & Each rule can only be associated with a single port. Should support port security to secures the access port based on MAC address. should have broadcast, multicast, and unicast storm control to prevents faulty end stations from degrading overall systems performance. Support Traffic Segmentation to restricted traffic flow from a single or group of ports, to a another group of ports. Should have SSH and SSL for IPv4 and IPv6. Require prevention of DoS attacks, which include Land, Blat, TCP Null Scan, TCP Xmas Scan and TCP SYNFIN. Should support 802.1X port based authentication. Should support ARP spoofing prevention. Should support DHCP snooping and DHCP server screening. Switch should able to create a binding table for IP + MAC + Port to prevents a malicious user from spoofing or to restrict the unauthorized users. Should support 802.1X RADIUS and local server database authentication. Should have option to check the status of copper cables using the cable-diagnostics time domain reflect meter (TDR). Able to manage trough Web-GUI, CLI, Telnet & SNMP Should support SNMP v1, v2c, v3 and SNMP Traps and Remote Monitoring (RMON). Should have dual Image support to reduce down time for the switches. Switch should support dynamic host configuration protocol (DHCP) auto configuration of multiple switches through a boot server eases switch deployment. Should have SNTP/NTP protocol for time synchronization. Should support Link Layer Discovery Protocol (LLDP) and LLDP-MED. Note Switch should be supplied with the all necessary components like Power cord, Rack-mount bracket, Installation Guide, etc. and necessary software image file to fulfil all above mention feature set from day 1. OEM Should be International certification for the ISO 45001 Health and Safety Management System, Information Security Management System: ISO 27001, ISO 9001 Quality Management System, ISO 14001 Environmental Management System, and ISO 14064-1 Greenhouse Gas Inventory Standards.

Supply, testing and commissioning of Access Points IEEE 802.11b/g/n/ac/ax, Wifi-6, 2x2+2x2 , PoE (802.3at) Access Point, Data Signal Rate Up to 1800 Mbps Access Point should have Wi-Fi: 802.11a/b/g/n /ac/ax, 802.11d & 11h, EAP, EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM Supports enhanced security – WPA/WPA2/WPA3 Personal and Enterprise, RADIUS client, and Cipher negotiation Access Point should have Interface Power Jack, Factory Reset Button, console port and LAN ports (PoE) Access Point should support Network Management: HTTP, HTTPS, Software Controller, Hardware Controller, SNMP Support, Telnet, Email Notification, Secure SSH Telnet. Access Point should allow auto fallback data rate for reliability, optimized throughput and transmission range Certifications - FCC, CE. Access Point should support Min Four Dual Band Internal Antennas: - 3 dBi (2.4 GHz), 4 dBi (5 GHz) and Maximum Output Power 22 dBm (2.4 GHz), 24 dBm (5 GHz) Access Point should support Wireless Resource Airtime Fairness, Connect Limit, Aging out, ACL RSSI and Band Steering, Wireless MAC ACL, WLAN Partition Support ARP Spoofing Prevention, Wireless Intrusion Protection, Bandwidth Optimization Access Point should support MAC-based access filtering and WLAN partitioning, Wi-Fi Multimedia Quality of Service (QoS), Traffic Control Uplink and Downlink limit, Access Point should show Ethernet traffic statistics and WLAN traffic statistic, Access Point should support Load balancing to optimize performance between Access Points Note Wi-Fi AP should be supplied with the all necessary components like wall and ceiling mount bracket, Installation Guide, etc. and necessary software image file to fulfil all above mention feature set from day 1.

CAT 6 end termination on both sides as per requirement

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the H class PVC conduit as required.( conduit included ) 1 run of cable

Supply, installation of flush mounted Enhanced Category 6 outlet. The plastic shall be high impact, flame-retardant, UL rate thermoplastic. Dust cover / blank shall be provided to protect unused faceplate openings. Termination caps and plastic cover shall be provided to protect jack wiring. D-link Single outlet faceplate with RJ-45 jack

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal)

First Aid Kit as per Red Cross Standards, complete with Medicines for Burns, Cut Vomiting , Swelling , Cotton Wool, Cotton Bandage , Surgical Sprit etc placed in a wall mounting box with 6mm thick front hinged glass cover, with the sign " +" and the inscription "FIRST AID" in Red Paint - Overall size not less than 450mm x 300mm x 200mm deep in two tier shelf pattern.

Supplying of 6 pair tool set kit 1. plair,2. screw driver set,3. Adjustable spaner,4. Goti set 12 to 24 no,5. hammer, 6. Clampmeter 1000A 2 no

Providing errecting Fixing of 7 meter octaganal hot dipped galvanizes 3mm thick poles with in built MCB arrangements with base template drilled plates/ top cap, Anchoring bolts of standard size etc the pole should have two arm arrangements at different levels (at 5 meter and 7 meter). and should beerrected on proper( Steel Rainforced) RCC base foundation not less than 0.75CUM in RCC (including) and should be provided with 1.5 inch HDPE conduits IN and OUT . as per site requirement complete.

Providing, fixing of GI cross Arms suitable for 120 watt cool out door luminaries

Providing, fixing of GI cross Arms suitable for 70 watt warm out door luminaries

Wiring for lighting out side throgh GI poles circuit submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, two core cable s 2 core 1.5 sq. mm

Supply , fixing of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, armoured, served, sheathed 1100 volts grade. 35 sqmm 3 1/2 core

16 sqmm 2 core

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. a) above 35 sq mm to 95 sqmm

b) up to 35 sqmm

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C”-curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole

Supplying and fixing 32 Amp 4p connectors in the in built MCB Segment of the GI pole complete in all respects

Supplying,Fixing, Testing and Commissioning of outdoor LED street light luminaries (Arm type) 120 Watt. Havells, Wipro, Halonix,LT

Supplying,Fixing, Testing and Commissioning of outdoor LED street light luminaries (Arm type)70 Watt. Havells, Wipro, Halonix,LT

Dismantling of of wiring and fixtures and store them till handing Over to concerned. complete as required

Supplying, installation, testing and commissioning of CE Certified LED Blinder Effect Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Quad LED COB Source, • Power Factor : >0.95 @ 230V AC 50Hz, • Color Temerature : 3200K, CRI & TLCI Value > 95, • R9 Value > 94, • Power cable: 3 core 1 sq. mm. copper PVC insulated, • Channels: 4/8 DMX-512 Channel Modes, • Beam Angle : 40°, • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run, • Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project. • Lux output at 2 Mtr : > 8,000 Lux @ 40°, • Flickering Rate : more than 10000 FPS, • Dimming: 0 - 100% Electronic Dimming, • Power and DMX: Loop in and loop out compulsary, • DMX in & Out Through : 5 Pin XLR connectors, • Certification: CE / BIS Canara Lighting/CAN LED BLDR 400/Deftech

Supplying, installation, testing and commissioning of CE Certified LED PAR Light with latest RDM technology for user friendly operation with below specifications: • Base Color RGBW Color Mixing, • LED Configuration : Multiple Nos Individual RGBW LED Configuartion, • Power cable: 3 core 1 sq. mm. copper PVC insulated, • Channels: 8 DMX-512, • Beam angle: 15°, • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run, Sound Active, • Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project. • LUX @ 2m: >10,500 @ 15° Beam Angle, • Dimming: 0 - 100% Electronic Dimming, • Function: strobe, dimming, sound active and Master slave. • Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish. • Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected. • Power and DMX: Loop in and loop out compulsary, • DMX in & Out Through : 5 Pin XLR connectors, • Certification: CE / BIS Canara Lighting/CAN LED BLDR 400/Deftech

Supplying, installation, testing and commissioning of CE Certified LED PAR Light with latest RDM technology for user friendly operation with below specifications: • Base Color 3200K Color Mixing • LED Configuration : Multiple Nos Individual 3200K LED Configuartion, • Power cable: 3 core 1 sq. mm. copper PVC insulated, • Channels: 1 DMX-512, • Beam angle: 15°, • Control mode: RDM, DMX512 & Manual, • Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project. • LUX @ 2m: >7,500 @ 15° Beam Angle, • Dimming: 0 - 100% Electronic Dimming, • Function: strobe, dimming, sound active and Master slave. • Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish. • Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected. • Power and DMX: Loop in and loop out compulsary, • DMX in & Out Through : 5 Pin XLR connectors • Certification: CE / BIS Canara Lighting/CAN LED PAR 543T/Deftech

CE Certified LED Profile Spot Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Single LED COB Source, • Power Factor : >0.95 @ 230V AC 50Hz, • Color Temerature : 3200K, CRI & TLCI Value > 95, • R9 Value > 94, • Power cable: 3 core 1 sq. mm. copper PVC insulated, • Channels: 1/2/3 DMX-512 Channel Modes, • Beam Angle : 19° or 15°, • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run, • Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project. • Lux output at 2 Mtr : > 27,500 Lux @ 19° or 15°, • Flickering Rate : more than 10000 FPS, • Dimming: 0 - 100% Electronic Dimming, • 4 Beam shaping shutters, • Accessory slot for Gobo and gobo holder, Iris & Color Frame should be available or else fixture will be rejected. • Housing: Metal Housing with black epoxy polyster powder coated finish or PVC Body with matt black finish, • Power and DMX: Loop in and loop out compulsary, • DMX in & Out Through : 5 Pin XLR connectors, • Certification: CE / BIS Canara Lighting/CAN LED PRO 219/Deftech

Supplying and fixing of Die cast Aluminium Quick Lighting Clamp duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg. Canara Lighting/AOC-10/Deftech.

Supplying, installation and testing of Safety bond with lock clip 1.5 Mtr Long made with twisted pair of GI wire rope, 2mm or 3mm Thickness with sleeve to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly. SWL 150Kgs. of reputed make.

Supplying and fixing of 79mm Round Identification name plate duly epoxy polyester powder coated in matt texture finish. Reputed make

Supplying, installation, testing and commissioning of Fixed Stage Light Bar, length 12 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch. Canara Lighting/FLB-12M/Deftech

Front of house Light Bar, length 14 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch. Canara Lighting/FLB-14M/Deftech

Supplying, installation and testing of Main Valance Bar, length 17.5 Mtrs made using 40NB, 48mm OD construction arrangement 2mm Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders. Canara Lighting/FVB-18M/Deftech

Providing and fixing of MS Side Lighting Ladder of suitable length and Width (Min 2400 mm Height & 600 mm Width) • Made using 40NB, 48MM OD, 2mm thickness MS Pipe • Suitable suspender and clamps made with MS Angle of size 40x40x5 mm thick or higher size • Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp, • Heavy duty Ladder Track to be laid throughout the depth of the stage. • 360° Rotatable and can move in unidirectional • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. of reputed make.

Providing and fixing of MS Fabricated 4 way 10A, 250V A.C, IEC, Lighting Junction box made up of 22SWG CRCA for LED lighting fixtures with Pipe clamp arrangement for fixing on pipe grid or Raul plug arrangement for wall/floor fixing, duly black epoxy polyester powder coated texture finish. Canara Lighting/JB-410IEC/Deftech.

Providing and fixing of MS Fabricated 2 way 10A, 250V A.C, IEC, Junction box made up of 22SWG CRCA with rocker switch to power up splitter and console with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, duly black epoxy polyester powder coated texture finish. Canara Lighting/PSB-210IEC/eq.

Providing and fixing of MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX Male socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. Canara Lighting/DMX-IBM5/Deftech

Providing and fixing of MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX female socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. Canara Lighting/DMX-OBF5/Deftech

Providing and fixing of MS Fabricated 5 pin DMX Signal Loop Junction box fitted with 5 pin DMX male/female socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. Canara Lighting/DMX-WLB5 /Deftech

SITC Well designed 24 Way Direct Lighting Distribution Board made up of CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt texture finish consists of R, Y, B Indicator lamp, 50A TPN incomer, SP Mcb's and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and Hingable door with magnetic door lock complete.Canara Lighting/DLDB-24/eq.

Providing and fixing of Auxiliary marshalling box for power and signal cable termination in grid level and in Motorised Light bar • CE Marked FC/PG cable entry gland required Nos as per cable entry. • MS channel arranging to fix terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. • Grey terminal connector with each line having P, N, E Indication for each line incoming and out going cable connectors. • Box door must be made with Hingeable door with screw lock. • Made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. Canara Lighting/AMB/Deftech

Providing and fixing of Motor Cable Termination box for power cable termination at grid level. • CE certified FC/PG 11 & 13.5 cable entry gland required Nos as per cable entry. • MS channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. • Grey terminal connector with each line having L1, L2, L3, E, 6 , 2 , 4 Indication for each line incoming and outgoing cable connectors (L1, L2, L3, E for Power supply & 6 , 2 , 4 for Limit Switch connection), • Box door must be made with Hingeable door with screw lock. • Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing • MS Boxe made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. Canara Lighting/PJB/Deftech

Providing and fixing of RDM Compatible DMX Splitter unit with Minimum following specifications. ● 1 Nos 5 Pin DMX In socket and 8 Nos 5 Pin DMX Out socket ● In and out signal Optically Isolated ● Atleast 8 LED Indicator for check the signal flow in each output. ●Suitable for standard 19” cabinet ● Duly black epoxy polyester powder coated texture finish. Canara Lighting/CS-81 /eq.

Supplying, installation, testing and commissioning of Digital Lighting Console with Ultimate portability, offering a powerful LED and moving light controller in a small 19” unit with direct access to each of the lights. ● 1024 DMX Channel ● LDC Screen for easy Navigation ● DMX compatible ● Control up to 96 LED, moving lights and conventionals individuals ● multi-function faders Canara Lighting/CANDX-C96 / Deftech.

Providing and fixing of 5 pin XLR male / female connectors of made up of Extra high temperature resistant insulator material, Larger solder contacts for easier termination. Reputed make

Providing and fixing of 5 Pin XLR Termination plug made up of extra high temperature resistant insulator material, Larger solder contacts for easier termination with 120 Ohm resister with 0.25Watt for signal termination.

Supplying, installation, testing and commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 7cx1.5 sq mm. POLYCAB/KEI/V-Gaurd/finolex/Havells

Supplying, installation, testing and commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 4cx4 sq mm. POLYCAB/KEI/V-Gaurd/finolex/Havells

Supplying, installation, testing and commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm. POLYCAB/KEI/V-Gaurd/finolex/Havells

Supplying, installation, testing and commissioning of of 2 Core DMX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DMX signal. Falcon/Deepcab

Providing and fixing of MS perforated tray of Size 40 x 75 x 40mm & 1.6 mm Thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement. Reputed make

Supplying, installation, testing and commissioning of Internal earthing and copper bare conductor of size 14 SWG for power network related to work

Additional Fixing arrangements as per the site requirements

Supplying, installation, testing and commissioning of required size of 3 phase cabling as per OEM

Supplying, installation, testing and commissioning of Main Curtain track system 17.5 Mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish. • 1.0 HP Motor 3 Phase Motor with control panel. • GI wire ropes with steel core at center. • Curtain holding trollies placed uniformly at specific interval of 200mm /250 mm throughout the track. • Diverter pulley, • MS yellow passivized Routing pulleys with ball bearing for smoother noiseless movement 165mm for outer diameter, 145mm diameter at groove base with 12mm pulley thickness. • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. Canara Lighting/MCT-18M/Deftech.

Supplying, installation of Fixed Rear Curtain track system 15 Mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: * Heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish. * Curtain holding trollies placed uniformly at specific interval of 200mm /250 mm throughout the track. * All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. Canara Lighting/RCT-15M/Deftech

Supplying, installation and testing of Main Valance Bar, length 17.5 Mtrs made using 40NB, 48mm OD construction arrangement 2mm Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders. Canara Lighting/FVB-18M/Deftech.

Supplying, installation and testing Frill Bar, length 12 Mtrs made using 40NB, 48mm OD construction arrangement 2mm Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders. Canara Lighting/FFB-12M/eq.

Providing and fixing of MS, Wing frame made out of 25X25mm or higher size made of MS square pipe with 2mm in thickness undergone through various chemical treatment to keep them rust free and duly powder coated in black matt texture finish with Below Specifications: • Wing Frame Size 6 x 2 Mtr • 1.5meter wing track of 48x84mm with grid mount brackets made of 40X50X40mm C track, • Pivotable 4 wheeled suspension trolley, • Adjustable floor locking screw jacks with rubber grips, • Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp, • Heavy duty wing track to be laid for minimum length of 1.5mtr, along the width of the stage. • 360° Rotatable and can move in unidirectional • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. Canara Lighting/WF-0602/Deftech

Supplying and fixing of Main Valance Fabric : Fire retardant velvette fabric 100% (2 times of the finished dimension) gathering as per the approved patern and colour, not less than 200 GSM, duly stitched along with eyelets. Size : L 17 x H 1.2 MTR Custom/Ompile/Nexgen/eq.

Supplying and fixing of Main Curtain Fabric : Fire retardant velvette fabric with lining 100% (2 times of the finished dimension) gathering as per the approved patern and colour, not less than 200 GSM, duly stitched along with eyelets. Size : L 18.5 x H 6 MTR Custom/Ompile/Nexgen /eq.

Supplying and fixing of Rear Curtain Fabric : Fire retardant cotton fabric 50% gathering for as per the approved patern and colour, not less than 200 GSM, duly stitched along with eyelets. Size : L 16 x H 6 MTR Custom/Ompile/Nexgen /eq.

Supplying and fixing of Frill Fabric : Fire retardant cotton fabric 50% gathering as per the approved patern and colour, not less than 200 GSM, duly stitched along with eyelets. Size : L 12 x H 1.2 MTR Custom/Ompile/Nexgen /eq.

Supplying and fixing of Wing Fabric : Fire retardant cotton fabric 0% gathering for as per the approved patern and colour, not less than 200 GSM, duly stitched along with eyelets. Size : H 6 x W 4.1 MTR Custom/Ompile/Nexgen/eq

Prosceinium : Providing and fixing MS hollow tube 50x25x2mm at vertically 600x600mm and horizontally 900x900mm installed at fascia of stage with necessary dash fastner at floor level and fixed to wall with 12mm ply strip with wooden grooved panel on front side and back side layer of gypsum Board complete with jointing tapingAnd two or more coat of plastic emulsion paint .

Supplying, installation, testing and commissioning of required size of 3 phase cabling as per OEM

Fixing arrangements as per the site requirements

Supplying, installation, testing and commissioning of 32 Chennel NVR 2 HDMI,1 VGA 1000 Mbps Lan Card Up to 32 channel IP cameras can be connected Up to 1-ch@32 MP/2-ch@12 MP/16-ch@1080p decoding capacity Only (B) version support 2 HDMI and 1 VGA interfaces, and HDMI interfaces support independent video output 4 HDDs for continuous video recording Supports various special function cameras, including thermal camera/fisheye/people counting/heat map/ANPR (automatic number plate recognition) Advanced streaming technology enables smooth live view and data self-correction in poor network conditions Supports dual-stream recording to save time and bandwidth.

Supplying, installation, testing and commissioning of 2Mp PTZ 25X zoom 2 MP Vandal Built-in Mic Fixed PTZ Network Camera High quality imaging with 2 MP resolution 25x optical 16x digital zoom Clear imaging against strong backlight due to 120 dB WDR technology Efficient H.265+ compression technology Built-in microphone for real-time audio security Water and dust resistant (IP67) and vandal resistant (IK10) Focus on human and vehicle targets classification based. of reputed make.

Supplying, installation, testing and commissioning of 10000 RPM Hard Disk Best For Surveillance 24x7 of reputed make.

Supplying, installation, testing and commissioning of 4 Mp 4K IP Dome Camera With Audio Mic 4 MP Vandal Built-in Mic Fixed Dome Network Camera High quality imaging with 4 MP resolution Clear imaging against strong backlight due to 120 dB WDR technology Efficient H.265+ compression technology Built-in microphone for real-time audio security Water and dust resistant (IP67) and vandal resistant (IK10) Focus on human and vehicle targets classification based on deep learning. reputed make.

Supplying, installation, testing and commissioning ofIP 4 MP 4K IP Bullet Camera Outdoor WDR Fixed Bullet Network Camera High quality imaging with 4 MP resolution Efficient H.265+ compression technology Clear imaging against strong back light due to 120 dB true WDR technology Water and dust resistant (IP67) Robust structure design with full metal materials. of reputed make

Supplying, installation, testing and commissioning of 2.4 GHz Wireless Mouse, 200Mtr Lan to HDMI converter ,Other Items as requires at site.

Supplying, installation of 15u Loaded rack Dilink/ eq. with ADB Fan and Power extension as per the standard specifications.

Supplying, installation of 6u loaded Rack Dlink / eq. With ADB Fan and Power Extension as per the standard specifications

Supplying, installation, testing and commissioning of Gigabyte 16 port 4 SFP 250 Mtr POE Switch (Managed) 24 x 10/100/1000BASE-T PoE ports 4 x 10G SFP+ ports for choosing the most suitable media type for your requirement Lite L3 Static Routing for increased network efficiency Full CLI for for easy management Advanced security features such as Access Control List, IMPB, 802.1X Authentication to enhance network security and protect the internet IT network 370W PoE Power Budget (802.3af/at) to allow more power for connected devices Supports STP/RSTP/MSTP to maintain the quality of network QoS Enablement for performance improvement of critical network traffic. of reputed make.

Supplying, installation, testing and commissioning Branded 55” Led TVfull HD 4K Led TV commertial series.

Supplying, installation, testing and commissioning of RJ45 Boot Dlink / eq. Premium Connector

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

2 run of cable

3 run of cable

Supplying, installation, testing and commissioning of required size of power supply wiring, MCB, swithes, sockets ets. as per the site reuirement to make the system functional in all respects

SITC of Left Cluster Line Array of High power versatile Line Array System with dual 12" 2 way passive neodvmium transducers. 1x12" woofer & 1 Hi pressure Compression HF 600W rms wide coverage specially designed long throw wave guided horn for even and crisp HF. Birchwood engineered rugged enclosure. make: DnB, Martin Audio, Vocal Audio, JBL,Bosh

SITC of Right Cluster Line Array of High power versatile Line Array System with dual 12" 2 way passive neodvmium transducers. 1x12" woofer & 1 Hi pressure Compression HF 600W rms wide coverage specially designed long throw wave guided horn for even and crisp HF. Birchwood engineered rugged enclosure.make: DnB, Martin Audio, Vocal Audio, JBL,Bosh

SITC of Rigginging arrangement for Line array system with complete accessories make: DnB, Martin Audio, Vocal Audio, JBL,Bosh

SITC of Dual 18" high power long excursion Subwoofer with 2000W RMS@4 ohms, Engineered with high quality high quality enclosure.make: DnB, Martin Audio, Vocal Audio, JBL,Bosch

SITC of Flying arrangement for Subwoofer with all complete accessories . make: DnB, Martin Audio, Vocal Audio, JBL,Bosch

SITC of Stage Monittor with 1x 15" driver with 2 way full range system 600W rms frequency response 55hz - 20Khz make: DnB, Martin Audio, Vocal Audio, JBL,Bosch

SITC of Delay Speaker with 1x 12" compression driver. 600W rms @8 ohms Birchwood engineered enclosure with high crisp quality sound.make: DnB, Martin Audio, Vocal Audio, JBL,Bosch

SITC of Speaker Hanging arrangement for delay speaker with complete accessories make: DnB, Martin Audio, Vocal Audio, JBL,Bosch

SITC of Digital Signal Processor with 2 Input and 6 output complete with Accessories make: DnB, Martin Audio, Vocal Audio, JBL,Bosch

SITC of Power Amplifier with 3000W Rms @4 Ohms, 1500 W per channel @4 ohm, dust proof level controls temperature colled fans.make: DnB, Martin Audio, Vocal Audio, JBL,Bosch

SITC of 24 channel analog mixer with 16 Mic Inputs with 48V Phantom Power and HPF per Channel 24 Line Inputs (16 mono and 4 stereo) 6 AUX Sends + 2 FX Sends 4 GROUP Buses + ST Bus 2 Matrix out.Yamaha, Midas, Digico ,JBL,Bosch

SITC of Gooseneck microphone with Transducer type Condenser Polar pattern Cardiod Frequency response 30 Hz - 18 kHz Sensitivity -52 +/- 3dB(0dB = 1V/1Pa, 1 kHz) Maximum input sound level 110 dB SPL, 1 kHz at 3% THD Signal-to-noise ratio >60 dBA Front/back ratio >25 dB (1 kHz) make: Shure, Sennheiser, Beyerdynamics, Bosch

SITC of of Wireless Handheld Microphone with Operating Range: 300 ft (91 m) line of sight (actual range depends on RF signal absorption, reflection and interference) Available Frequencies: Between 524–865 MHz Audio Range: 50–15,000 Hz (dependent on microphone type) Transmitter RF Output Power: 10 mW, typical (varies by region) Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4") Battery Life: Up to 14 hours Dynamic Range: 100 dB A-weighted System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone) make: Shure, Sennheiser, Beyerdynamics, Bosch

Sitc of Wireless Lapel Microphone with Type Electret Condenser Frequency Response 50 to 20,000 Hz Polar Pattern Unidirectional (Cardioid) Output Impedance @ 1 kHz, typical 600 Ω Audio Output Level -43.5 dBV/Pa Signal-To-Noise Ratio[1] @ 1 kHz 72 dB Maximum SPL[1] 1000 Ω load, @ 3% THD 139.0 dB Dynamic Range[1] @ 1 kHz, 1000 Ω load 117.0 dB make: Shure, Sennheiser, Beyerdynamics, Bosch

SITC of of Wired Handheld Microphone with Type Dynamic Frequency Response 50 to 15,000 Hz Polar Pattern Cardioid Sensitivity (at 1,000 Hz Open Circuit Voltage) –54.5 dBV/Pa (1.85 mV) 1 Pa = 94 dB SPL Impedance Rated impedance is 150Ω (300Ω actual) for connection to microphone inputs rated low impedance Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. with full height stands make: Shure, Sennheiser, Beyerdynamics, Bosch

SITC of of Instrumental Microphone with Type Dynamic Frequency Response 40 to 15,000 Hz Polar Pattern Cardioid Sensitivity (at 1,000 Hz Open Circuit Voltage) Open Circuit Voltage: -56.0 dBV/Pa (1.6 mV) (1 Pa = 94 dB SPL) Impedance Rated impedance is 150Ω (310Ω actual) for connection to microphone inputs rated low impedance. Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

SITC of of Antenna Distribution System with Power Requirements 14 to 18 V DC DC Output 14 to 18 V DC (x4) Output Current Combined total from all DC outputs 2.5 A, maximum Impedance 50 Ω RF Frequency Range model dependent 174 to 1805 MHz Output Intercept Point 21 dBm, typical Connector Type BNC Impedance 50 Ω Output Connector Isolation 30 dB, typical Gain Input to any output port (Unused ports terminated in 50 Ω) -1 to +1 dB. make: Shure, Sennheiser, Beyerdynamics, Bosch

SITC of of Booster antenna system with Connector Type BNC, Female Impedance 50 Ω Power Requirements 10 to 15 V DC bias from coaxial connection, 75 mA Third-order Overload Intercept Point (OIP3) >30 dBm make: Shure, Sennheiser, Beyerdynamics, Bosch

SITC of of Wooden Podium with Gooseneck microphone connectivity and reading lamp. Make: Satvik, AHA, Univeso

SITC of of Cable cubby with Hydraulic Pop Up Box/Cable Cubby with Switch 2 Universal Power Socket + 2 RJ-45 (CAT-6) + 1 VGA + 1 USB (DATA) + 1 HDMI (4K) +1 3.5 MM AUX Port (MX 7002A) make:Prima, Vocal Audio, MX

SITC of of Transmitter based on CAT-6 with 100 mtr range and Supports HDMI 2.0b, 4K@60Hz 4:4:4, HDCP 2.2 compliant. USB-C input supports 4K@60Hz 4:4:4. Supports to transmit 4K/1080p signal up to 328ft(100m). Supports bi-direction 24V PoC power supply. 4 USB 2.0 ports for connecting with KVM device. Micro-USB for firmware upgrade. make: Milestone Pro, Lightware, Extron

SITC of of Reciever based on Cat-6 with 100 Mtr range and supports Supports HDMI 2.0b, 4K@60Hz 4:4:4, HDCP 2.2 compliant. USB-C input supports 4K@60Hz 4:4:4. Supports to recive 4K/1080p signal up to 328ft(100m). Supports bi-direction 24V PoC power supply. 4 USB 2.0 ports for connecting with KVM device. Micro-USB for firmware upgrade. make: Milestone Pro, Lightware, Extron, Dlink

SITC of of 8x8 HDMi Matrix switcher with audio deembedding, 8x8 HDMI 2.0 Matrix Switcher. Supports 4K/60 4:4:4, HDR, HDCP2.3 compliant. Audio Matrix, audio out can be de embedded fro m arbitrary input or output. Individual volume adjustment on each L+R output. Supports 4K to 1080p down scaling up to 4 outputs. HDMI out provides 2.5W to power Active Optical Cable (AOC). HDMI Out put support up to 5V500mA for AO C cable Controllable by fr ont panel, IR, RS232 and TCP/IP. make: Milestone Pro, Lightware, Extron

SITC of of Long throw lens for above projector Zoom / Focus, Powered / Powered Lens shiftVertical: +/- 107% Horizontal: +/- 57% Aperture f/1.70 to 2.10 Screen size 40" to 600" with screen. make: Sony, Barco, Christie

SITC of 42U 6mm x 800m powder coated equipment rack with all complete accessories. Make: Tarkus, Valrack, Datarack , Dlink

SITC of 4 sqmm Speaker Cable with No of Conductors 4 Conductor – No/ Size of Wire 128/0.20mm Conductor – Cross Sectional Area 4 Sqmm Insulation Type PVC Insulation Dia. 4.20 mm Core Colours Red, Yellow, Blue & Green make: Krystal, Vocal Audio, Belden

SITC of 2.5 Sqmm Speaker Cable with No of Conductors 2 Conductor – No/ Size of Wire 80/0.20mm Conductor – Cross Sectional Area 2.5 Sqmm Insulation Type PVC Insulation Dia. 3.60 mm Core Colours Blue and White Sheath Type Vasiform PVC. make: Krystal, Vocal Audio, Belden

SITC of 20/22 AWG Microphone Cable with No of Conductors 2 Conductor ( No. / size of wire) 16/0.20 mm Cross Sectional Area 0.50 sqmm (20 AWG) Insulation Material LDPE Insulation OD 1.60 mm Insulation Colours Red / Black Shield Conductor ATC Copper – (0.10mm ) 112 wires make: Krystal, Vocal Audio, Belden

SITC of CAT-6 Sheilded Cable with Category : 6 SFTP Solid cableConductor : 23 AWG Multi-cores (Solid)Conductor Meta : Bare CopperInsulation Materia : HD-PEPairs : 2 Insulated conductors twisted togetherShield : Aluminum / Polyester Foil Tinned copper BraidingSheath : PVC/LSZHCable Diameter : 7.5 mm nominal with conduit. make:Dlink, Panduit, Molex

SITC of various XLR connectors and jointers reputed make.

SITC of 1.8 Mtr High Speed HDMi Cable Manhatten, Extron,

SITC of Floor Mounted Box with 4xXLR make: MX , Nuetrik , San Pro

SITC of Floor Mounted Box with 2xXLR make: MX , Nuetrik , San Pro

SITC of Cyclorama Screen with light arragements and with MS Structure complete as per engineer in charge (Custom as per OEM)

SITC of 24 Port POE + Unmanaged switch Make: Dlink, Aruba, Tplink

SITC of Wifi router with 4 band antenna Make: Dlink, Aruba, Tplink

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying of table stand, mic stand of reputed make

Supplying of floor stand, mic stand full length foldable and adjustable of reputed make

Supplying of mic holder of reputed make

Supplying and fixing of Fixed with PP Arm Overall Dimensions (for Fixed type chairs) L*B*H : 682 mmX 620 mm X 985mm, Centre distance between the seats 560mm Seat Dimension 400mmx550mmx90mm Seat Construction Metal Frame MS & Tubular frame of ERW IS4923, Moulded Pu foam and Fabric, Back Dimension 550x100x660 (LxWxH), Back Construction Metal Frame MS & Tubular frame of ERW IS4923, Moulded Pu foam and Fabric, Inclination of Back Rest 17 Degree, Seat and Back Cushion Moulded Pu: Max 90 mm, 50±5 KG/M^3 Density, 21±3.7 kg Hardness, Seat and Back Fabric knitted fabric, lamination 2mm, GSM 160, 35000 Abrasion resistance Cycles, WET 4-5, DRY 4-5 Colour Fastness Rubbing and Light, Inclination of Seat Surface 9 Degrees. Seat Folding Type Auto Tip Up with spring, Armrest Fixed- 250X60x644 mm, PPCP / PP+30% TALK, 450mm from floor Surface, Legs MS & Tubular frame of ERW IS4923. Tube dia meter 52.6x1.63 MM, HR 3mm connecting plate, Fixing Anchor bolt M8 X100 mm, Compleance BIFMA X5.4, including all fixing arrangements in all respects. make: wipro/ Godrej/ Harman miller

Supplying and fixing of front row Seat Push back PP Arms Size – Overall Dimensions of Chair : including all fixing arrangements in all respects. Height - 1040 mm, Width & Depth of Chair Width – 584 mm (23in) (Arm to arm c/c), Depth - 720 mm (normal), Seat cushion height – 450mm Armrest height – 555mm Tolerance - +/-10mm Compliance BIFMA X5.4 Material – Seat - The seat frame assembly shall be ERW Tube / IS:3074-2005 GRADE 1: 19 mm dia Round Pipe 18 gauge Thickness. Seat should have moulded profile shall be developed to help the users to get the necessary comfort in popliteal region and ease of use in forward push for the seat sliding feature. Backrest - The backrest assembly shall be made of ERW Tube / IS :3074-2005 GRADE 1: 16mm dia Round Pipe 16 gauge Thickness & Extra Reinforcement 16mm dia round pipe 18 gauge. The back foam shall be designed with contoured lumbar support for extra comfort at upright and tilted conditions. The Automotive grade HR polyurethane foam for Seat and Back shall be moulded with Density = 55 +/- 5kgs/cu.m. with compression max 13%. The back & seat covers are made of injection molded thermoform PPCP as per IS: 10915-1984. Armrest - The armrest shall be made up of Polyurethane with waterfall-edge design.. Push Back mechanism – Coil Spring / Spring Steel IS : 4454 1981 GRADE 2. The slider travels upto 60mm with metal ball and roller cage which results in PUSH BACK OF 140+/-10mm. Should have flexibility to restrict movement of the pushback and slider as per availability of aisle space. The mechanism houses the seat & back and shall has a special feature of upright resistance lock to avoid activation of sliding feature unless enough force shall be applied by user when tilting shall be required. For Auto Tip-up – Torsion Spring / Spring Steel IS : 4454 1981 GRADE 2 (part i). The chair shall rests on the ground on two Side wing frame with plywood with upholstery. Each Leg is a MS ERW rectangular tube of cross section 50mm X25mm, 16 gauge Thickness as per IS:4923-1985 standards. Mechanism: 3 IN 1 SLIDER MECHANISM with stopper - Metal mesh structure is integrated with a slider mechanism with a unique mechanism with a triple action of PUSHBACK +FORWARD SLIDE OF SEAT +AUTO TIP UP OF SEAT(synchronous movement of seat and back). Stopper to be provided to prevent the slider mechanism. The side panel frame is made of HRPO sheet metal as per IS :1079 -1994 standards along with fabric upholstered plywood. It shall be grouted to the floor using 4 nos. bolts for each panel through the base plate. The heavy duty 100 % polyester dyed yarn with 3mm + 0.5mm foam backing fabric to be provide. The shade for the fabric upholstery as per the client requirement . Fire resistance grade material confirms to IS 15061. make: wipro/ Godrej/ Harman miller

Wiring for seat identification with Wiring for seat light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, , suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. including floor cuuting to lay conduit and reseting the floor cuts and finishing well as required. note: all items included like Conduit, wire, box, MCB etc in loop upto control room in loops

SITC of LEB Black Theatre/ Auditorium seat light, 12V DC IP 54 white LED's of reputed make as per sandards

SITC of 220 AH, 12 V battery of reputed make with trolley

SITC 12V SMP power 230 V AC/ 12 V DC supply to charge the battey. Of reputed make

SITC of INPUT and OUTPUT supply DB's With AC and DC MCB's as per site requirement to make system functional

Wooden wall paneling : Providing and fixing of wood melamine finish mdf board panel with perforation to be fixed on wall .the panel shall be with melamine laminate finish of size2430mm x 192mm/550mm x 15mm with 21mm pitch toungue and groov edges for seamless mounting having density of 700/800kg/m3. The back of the panel are perforated with 10mm diameter circular holes with a nonwoven fabric covering of 0.2mm for providing sound absorption via the acoustics impendance method panel is to be fixed on GI frame work with screw fixed horizontal/vertical to wall at every 600mm c/c with clip tongue & Groove system on GI framework. The cavity of framework should be inserted with 50mm thick 1000gsm non wooven polyster wedding.

Fabric Wall Treatment:Providing & Fixing of Acoustical Fabric paneling with 12mm x 28mm UPVC Grippers on 50mm wide and 12 mm thick commercial ply fixed on 9mm commercial ply over the Gi Frame 25mm Polyester foam to be pasted on the top of the ply. Finally fabric is stretched through grippers as a final finish

Acoustic Panel For Stage Wall :Providing & fixing Magnesite Binded Solo Acoustic Panels made of Pine Wood Fibre 20mm thick 1220 x 610mm Natural Standard ND40 Square Edge screw fixed @ 200mm on GI metal frame comprising of Floor & Stud Channel making a grid of 900 x 600mm c/c. The frame is to be made in proper line after leveling. The panels will be backed with 50mm Thick 1000 gsm polster fiber inserted inside the grid of 900mm x 600mm which in total will comprise of minimum NRC 0.80 as per IS: 8225/ ISO: 354/ ASTM: 423 – 90 a. Acoustic Tile should meet the Stringent Fire test requirement having Class ‘P’ rating for Ignitability test as per BS 476 part 5; Fire Propagation index, I = 4.11 [lower the better] as per BS 476 part 6 and Class ‘1’ rating as per BS 476 part 7 for Surface Spread of Flame test. Class ‘P’ and Class ‘1’ are the highest rating. Two coat of color paint should be spray painted. All joints of the tiles must in perfect line and level.

Carpet : Supplying and Fixing of broadloom carpet of ,100% Nylon Cut Pile , Chromojet Printed , Height 7 mm (± 1 mm),Total Height 11 mm (± 1 mm),Stitch / 10 cm 37-39 (± 2% ), Pile Weight Net less Than 800 GSM (± 5% ), Total Weight 1791 GSM (± 5% ), Secondry Backing PP Mesh, Gauge 1/8 Cut Pile, Latex Natural Rubber, Color fastness to LightTest Method: AATCC 16 (20 AFU) ≥ 4.0 at 80 Hours , Static Electricity Test Method: AATCC 134 Less than 3.5 KV, Hexapod test Method: ASTM D 5252 ≥ 4, Flammability (Radiant Panel) Test Method: ASTM E 648 ≥ 0.45 (Class I) , complete as per drawing specifications of the architect. The carpet and Underlay (min 6 mm) will be installed with standardFevicol/DunlopAdhesives.The flooring to be installed as per the manufacture's specification and to be installed by its authorized agency or as Approved

Fabrication Box Paint : 7 Process Powder Coated, System construction : As per IS 9815, Independent Phase Control : Maintain each phase voltage stable irrespective of unbalanced load, Transformer Winding : Copper 99.9% Pure, Duty Cycle : 100%, Container: 14 SWG with Stove enamelled paint, Cable Box and Busses : BAR suitable size of cable box with 6 aluminium busbars (3 for input, 3 for output and 1 for neutral), Regulator : Toroidal Type, Paint : Powder Coated, Color : RAL 7035 (Polyester Powder Coating) System Construction : AS per IS-9815, the equipment includes 36 months AMC comprehensive type. Foundation Construction of Foundation for 250 KVA Servo (as required at site) of 2.5 feet above ground and 2 feet below ground level, size (8 feet x 8 feet ). Excavating/ steel bars/ Reinforced cement concrete work in well-staining, excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse Sand (zone-III): 4 graded stone aggregate 20 mm nominal size). along with fence around the foundation As required as per site, complete in all respects.

MAIN ChangeOver and Distribution (ABB, Siemens, Eaton make switch gears) NON D.S.R ITEMS "Supply, installation, testing and commissioning of LT ChangeOver and Distribution. cubicle type totally enclosed free standing type, dust, damp and vermin proof Main Distribution Board complete with busbars, M.V. danger notice plate,space heater, power outlet, illumination lamp, Multifunction Meter indicating lamps, CT's, interconnections, with suitable capacity aluminium leads / solid aluminium strips / rods, connection of incoming and outgoing cables with thimbles, stove enameled painted and having following incoming and outgoing MCCB & Auto Transfer Switch complete as required. Note:-Internal control wiring for capacitor bank with main LT Panel to be in the scope of panel builder. " (NS) MLTP PANEL(ChangeOver and Distribution) LT SECTION INCOMER: 1nos. 400A 4P thermal magnetic based MCCB of 36kA with Rotary Handle, Adjustable "1 nos. Digital type multifunction meter with following parameters Digital multifunctional meter having RS 485 port for BMS Integration with CT's of 400/5 Amp."

1 Set of R,Y,B LED phase indicating lamp with MCB protection. 2 Set of ON,OFF & TRIP LED indicating lamp with MCB protection. BUSBARS: 630 Amp TPN (25kA for 1sec) aluminium busbar chamber of suitable length with aluminium busbars. All busbars and interconnections shall be of suitable size aluminium strips. Current density of aluminium shall not be more than 0.8 Amps/ sq.mm. OUTGOING: 2 nos. 250A 4P thermal magnetic based MCCB of 25kA with Rotary Handle, adjustable 2 nos160 4P thermal magnetic based MCCB of 25kA with Rotary Handle, adjustable 3 no. 125A 4P thermal magnetic based MCCB of 25kA with Rotary Handle, 1 set of three phase Surge protection Device For all out goings ON/OFF LED indicating lamp with MCB protection. MLTP PANEL described above and specifications complete. Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. a) Upto 35 sq. mm

b) Above 35 sq. mm and upto 95 sq. mm

c) Above 185 sq. mm and upto 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. a) 3½ X 70 sq. mm (38mm)

b) 3½ X 150 sq. mm (50 mm)

c) 3½ X 240 sq. mm (62mm)

Supply, Unloading, storage, Shifting, Laying, charging & commissioning of 1100 Voltage grade, FRLS, XLPE/PVC insulated, inner and outer XLPE/PVC sheathed, galvanized steel wire armoured / Unarmored power cables of following sizes on already laid cable tray / tranch as per approved drawing & technical specification. a) 3½ X 70 SQ MM AL XLPE Armoured Cable

b) 3½ X 150 SQ MM AL XLPE Armoured Cable

c) 3½ x 240 SQ MM AL XLPE Armoured Cable (2 runs)

Supply of 1000 mm wide, 2000mm length, 2mm thick, 1.1kV grade, antiskid rubber mat, As per IS 15652-2006 and of reputed make to be spread in front of the 415 V switchgear panels / DBs etc.

Supply & Installation of Danger boards for 11 kV and 415V. The boards shall be in English, Local Language 415V system

Supplying and fixing of shock treatment chart (prescribed under I.E. Rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work. (Approx. front area = 1.20 sq. M)

First Aid Kit as per Red Cross Standards, complete with Medicines for Burns, Cut Vomiting , Swelling , Cotton Wool, Cotton Bandage , Surgical Sprit etc placed in a wall mounting box with 6mm thick front hinged glass cover, with the sign " +" and the inscription "FIRST AID" in Red Paint - Overall size not less than 450mm x 300mm x 200mm deep in two tier shelf pattern.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply, installation, testing & commissioning of 30kVA 3 phase in and 3 phase out UPS with isolation transformer in the input side of UPS. UPS comprising of Valve Regulated Lead Acid Sealed Maintenance Free batteries of minimum 10 years design life to provide 30 minutes backup at full load with UPS. The bank of batteries shall comprise of required numbers of batteries connected in series. Battery banks shall be consist of battery rack, interconnection, DC Switch disconnector , AC Adaptor Box etc. complete as required to make the system operational. Isolation transformer shall have seperate neutral.

Supplying and fixing of WHEELED and loaded FOAMMIST BASED SYSTEM • Fights Class A, B and ESF fires • 4 x Mist Generator breaks water down to 80 microns • Specially designed Discharge Gun employs either spray or jet mode • 5 metre long Hose Pipe • Low pressure, safe technology • Environment-friendly Agent: Foammist of standard make. a) 25 Liters Product code of Cease fire for refference only CF-000747

b) 50 liter Product code of Cease fire for refference only CF-000748

1c) 00 liters Product code of Cease fire for refference only CF-000749

Supplying and fixing of loaded STAND ALONE SUPPRESSION SYSTEM cieling mount type Features: • Fights Class A, B, C and electrically started fires • Automatic Discharge Mechanism • State-of-the-art Pressure Gauge • 6 years warranty Sizes available: 5 kg, 10 kg Agent: MAP 90 and Clean Agents HFC236fa a) 5KG Product code of Cease fire for refference only CF-000770

b) 10KG Product code of Cease fire for refference only CF-000771

Supplying and fixing of CO2 BASED PORTABLE & WHEELED EXTINGUISHER Packed with tremendous power Features: • Fights Class B, C and ESF res • Advanced horn to dispese gas, removes risk of freeze burn • State-of-the-art Ready/Used indicator • Available in portable and trolley-mounted variants Sizes available: Portable: 2 kg Wheeled Base: 22.5 kg Agent: CO2

Supplying and fixing of approved make fire buckets of 24 gauge galvanized steel sheet with 8 no sand buckets, standard 9 liters capacity as per IS:2546:1974 and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of providing MS stand duly painted over a coat of primer (one stand shall be suitable for hanging 4 buckets).

Providing and fixing of 4.5kg. capacity I.S.I. Marked. (IS : 15683) Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge.

PORTABLE FIRE EXTINGUISHERS 'Providing and fixing of ABC stored pressure dry chemical powder (monoammonium phosphate) Fire Extinguisher IS : 13849 latest revision manufacturer and of CRCA sheet in welded construction, finish with epoxy polyster powder coated complete with brass forged ball valve, gun metal cap and nozzel, including initial filled and wall suspension bracket (suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable liquid, electric and gases. 4 Kg. Capacity

Supplying, fixing of Automatic fire fighting ball “TECHIDEAS” ELIDE FIRE or equivalent ABC type extinguishing ball, automatic fire extinguishing technology. AUTOMATIC fire fighting ball Size (Diameter.) 6 inches. or 152 mm. (ELB01) WEIGHT (Kg.) 1.3 Kg. +/- 0.2 Kg. COVERAGE AREA 4 sq. meter radius 360 degree Installation ambient temperature -40 C° up to +85 C° Service life of automatic fire surveillance (years) 5 years Operating time (sec.) 3-5 seconds Operating temperature 280 C° or touching the flame etc. including Providing, fixing of suitable holding stand for same

Wiring for fire alarm detector/ call/ hooter/strobe points with 1.5 sq.mm FRLS PVC insulated copper conductor 2 core cable cable un armoured including start and back loop of circuit in in Medium class PVC conduit as where reuired, , suitable GI box etc. as required. note: all items included like Conduit, cable etc

Supplying, installation, testing & commissioning of intelligentan alog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. (make suitable for existing FAP)

Supplying, installation, testing & commissioning of addressable fire control module complete as required. (make suitable for existing FAP)

Please Enable Macros to View BoQ information