WELCOME MAINT AND OTHER MISC INCL E/M WORKS UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Taking down old existing water proofing treament from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises. Complete all as specified and directed.

M&L for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in padding or roof finished even and fair without using extra cement.Complete all as specified and directed.

M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg/sqm followed evenly by a tack coat @ 1.20kg/sqm using 85/25 grade industrial hot blown bitumen, over it laid with APP modified polymeric water proofing membrane weight 3.6 kg/sqm reinforced with non-woven polyster fabric (weight not less than 160 gm/sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufcturers instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20kg/sqm and finally finished the top of polymeric water proofing membrane with a coat of bitumen aluminium paint @ 0.20kg/sqm as per manufacturers instructions. Complete all as specified and directed.

M&L 20mm thick cement plaster in CM 1:4 on roof surfaces with water proofing compound. Complete all as specified and dirtected. (Note- water proofing compound shall be paid separately). Complete all as specified and directed.

Supply only integral water proofing compound. Complete all as specified and directed.

Dismantiling boarding any description fixed in any position with nails and M&L 18/19 mm thick prelaminated particle board, interior grade, prelaminated bothe side decorative choice lamination fixed with screws to timber frame work as in cupboard & shelves incl hasp staple, butt hinges, alumninim handles, alu tower bolt, knob as per site requirement and complete all as specified and diereced.

Dismantiling boarding any description fixed in any position with nails and M&L 18/19 mm thick prelaminated particle board, interior grade, prelaminated bothe side decorative choice lamination fixed with screws to timber frame work as kitchen cabinet, almirah & shelves incl butt hinges, hasp & staple alumninim handles, alu tower requirement and complete all as specified and diereced.

S&F SS auto hinge size 150mm for cabinet case complete all as specified and as directed.

S&F in stainless steel plain basket of size 17"x20"x6" complete all as specified and as directed.

S&F stainless steel partion of size 17"x20"x6" complete all as specified and as directed.

S&F stainless steel cutlery of size 17"x20"x6" complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) Complete all as specified and directed.

M&L 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of floors. Complete all as specified and directed.

S&F stainless steel grain trolly with stand of size 21"x17"x10" complete all as specified and as directed.

M&L 60mm thick coloured rubber moulded (comparising of red & yelow colour) interlocking pavers in approved design/colour set laid over 25mm thick coarse sand complete all as specified and directed.

Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed.

All as per item No 16.00above but area exc 1.50 Sqm but n-exc 4.0 Sqm each

Taking down of sutters of any description exc 1.0 sqm but n-exc 2 Sqm each Complete all as specified and directed.

Supply and fixing for mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or toeht covering runnign rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side Complete all as specified and directed.

Supply and fixing made plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venered particle board with commercial veneering on both faces, the size of rail at stile as per IS: 1003 Pt-I kiln seasoned and chemically pressure treated Complete all as specified and directed.

Supply and fixing for 35mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepaired to receive glass gauge etc, (with sash bars) edgeg of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.20(a) complete all as specified and directed

Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, & bottom rail, lock rail & bottom rail on either side & as gap insert for top rail & colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed

Supply and fixing for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing Complete all as specified and directed.

S&F 20mm long SS telescopic sider to facilitate drawer slide on steel ball bearing fixed with steel screws. Complete all as specified and directed.

Supply and fixing for 100mm long butt hinge stainless steel Complete all as specified and directed.

Supply and fixing for aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long Complete all as specified and directed.

Supply and fixing for aluminium alloy anodised sliding door bolt 250mm long with haps staple bolt type and fixing clips of sheet etc Complete all as specified and directed.

Supply and fixing for 150mm long aluminium handles cast type anodized Complete all as specified and directed.

S&F 150mm size stainless steel bright finish handle for cabinet shutter. Complete all as specified and directed.

S&F stainless steel plate basket of size 17"x20"x6" Complete all as specified and directed.

S&F 2nd class hardwood plain, solid, straight, chowkates & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

Supply and fix box type steel windows with side hung shutters including box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded including cutting holes and painting with one coat of red oxide zine chrome primer and two coats of synthetic enamel paint including making good the disturbed surface and match with the existing surface by providing whitewash/colour wash/distempering/cement base paint incl taking down the old steel window incl all fittings. complete all as specified and directed.

Supply and fix box type steel ventilator with top hung shutters hinges with steeel handle and steel peg stay complete including paintings with one coat of red oxide zinc chrome primer and two coats of synthetic enamel paint including making good the disturbed surface and match with the existing surface by providing whitewash/colour wash/distempering/cement base paint incl taking down the old steel ventilator incl all fittings. Complete all as specified and directed.

Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-290 Gde F-165 complete all as specified & directed.

Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame Complete all as specified and directed.

Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified & directed.

All as per serial item No.37.00 here in before but pin headed glass 3mm.

Supply & fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Supply & fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Material and labour for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer including preparation of surface, over 10 cm width or girth Complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface incl preparation of surface over 10cm width or girth Complete all as specified and directed.

Supply and fixing powder coated aluminium sliding window made out of hollow extruded aluminium sections as mentioned belwo and glazed with tinted glass 4 mm thick fixed with glazing clips rubber beading / gasket anodised aluminium beading screws and lock type handles of size 75 mm 2 Nos aluminium tower bolts 150 mm long incl grill with one more rebates etc incl taking down old window complete all as specified and directed by Engr-in-charge. Shutter top and bottom size : 37.50 x 15 x 1.60 mm thick Shutter inner lock size 37.50 x 15 x 1.60 mm Shutter side (handle) size 37.50 x 15 x 1.36 mm Chowkat bottom size : 50.30x26x1.20 mm Chowkat top & sides : 50.30x15x1.00mm Make (i) Anodised aluminium section : Jindal/HINDAL Co/INDAL Co (ii) Glass : SAINT GOBAIN/MODI GUARD/TATA

Supply and fixing for 20 mm dia stainless steel curtain rods with wall thickness 1 mm including stainless steel bracket, holding and funnel on ends as fixed in repairs. Complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings Complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified and directed.

M&L pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified and directed.

S&F structural steel work for in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240complete all as specified and directed.

Supply and fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule Complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes Complete all as specified and directed.

Supply and fixing in repair 15mm bore stop valve/angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union Complete all as specified and directed.

Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts Complete all as specified and directed. Make : Symet/ Prayag

Supply and fixing in repair cast copper alloy chromium plated shower rose fancy type fixed to 15mm bore pipe Complete all as specified and directed.

Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia ‘D’ type 60 cms long between flanges Complete all as specified and directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets Complete all as specified and directed. Make : Hindware/Paryyware /Prayag /Polytuff

Supply and fixing in repair vitreous china squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor Complete all as specified and directed.Make : Parry ware/CERA/Hind Ware

Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including connection to out going pipe and flushing pipe Complete all as specified and directed. Make : Parry ware/Hind ware/CERA

Supply and fixing plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and fixing in repair vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed. Make Parryware/CERA/Hindware

Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as specified and directed.

Taking down steel tubing and connections incl cleaning for refixing or removal from site for 15 mm bore pipe complete all as specified and directed.

All as per item No 62.00 here-in-before but for 20 mm bore pipe.

Supply and fixing 15 mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed. Make : JINDAL/PRAKASH/TATA

All as per item No 64.00 here-in-before but for 20 mm dia.

Supply & fix in repair PVC waste pipe 32mm dia for wash hand basin complete all as specified and directed.

Supply & fix in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets Complete all as specified and directed.

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

Supply & fix in repair chromium plated, ABS plastic with stainless steel tube with PVC holder jet health faucet fixed in WC seats complete all as specified and directed.

Supply & fixing in repair steel CP grating 100/125 mm dia incl waste hole where required at site complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fix non skid glazed ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 complete all as specified and directed.(Make: Kajaria/Somany/Orient).

Supply & fix Light shade vitrified tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 10mm thick screed in CM 1:4 and all as per manufacturer's instruction complete all as specified and directed. (Make- Kajaria / Somany /Johnson / Orient).

All as per item No. 73.00 here-in-before but in skirting / dado and including 10 mm thick screed bed CM1:6 complete all as specified and directed. (Make-Kajaria/Somany/Orient).

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for granite stone polished 15 to 18mm thick(table rubbed &polished) in steps, jambs, window cills, cooking platforms, sink and the like in CM 1:4 incl pointing in white cement mixed with pigment to match shade of stone incl rounding of edges and making holes for gas pipe complete all as specified and directed.

M & L machine cut kota stone slab flooring16-20mm thick (table rubbed & polished) in steps, resers, jambs, windows cills, cooking plateform and the like in CM 1:4 screed bed incl pointing in white cement mixed with pigment to match shade of stone incl rounding of edges.Complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc Complete all as specified and directed.

Demolition of brick work built in cement mortar of any description. Complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks, old size bricks , straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6). Complete all as specified and directed.

M&L brick work with sub class' B' bricks(except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6. Complete all as specified and directed.

Material & labour 15mm thick rendering in cement mortar 1:6 on brick or concrete wall surfaces of any description finished even and smooth without using extra cement Complete all as specified and directed.

M&L 5mm thick cement plaster in CM 1:3 as on ceiling Complete all as specified and directed.

Material and labour for rendering 15mm thick on brick or concrete wall surfaces of any description in cement mortor (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

Materials & labour for preparation of new plastered surface of walls etc and applying two coats of OBD over and including a coat of Birla/JK wall care putty to match the existing surfaces of wall as required complete all as specified & directed Make : Asianpaint/Berger.

Materials & labour for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified & directed.

All as ser item No. 87 above but one coat on old ceiling surface. Complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint (weather proof) over a coat of wall care putty of 1.00-1.5mm thick complete all as seceficed and directed. Note:-Application will be done with rollers through authorised applicator of complany.

Material and labour for old plastered surfaces of walls and applying two coats of exterior emulsion paint (weather proof) over a coat of wall care putty of 1.00-1.5mm thick complete including taking down existing cement base paint etc by brushing machine all as specified and directed. Note:-Application will be done with rollers through authorised applicator of complany.

Washing, rubbing down and stopping of distempered and painted surfaces\ existing treatment from walls and preparing the surface by applying wall care putty (Birla / JK Wall care putty) incl rubbing with sand paper to prepare smooth surface complete all as specified and as directed.

Material and labour for applying two coats of oil bound distemper on prepared surfaces of walls complete all as specified and directed. Note:-Application will be done with rollers through authorised applicator of complany.

Material and Labour for applying one coat of synthetic enamel paint on old wooden surfaces of any description, not otherwise described over 10cm width or girth after preparation of surfaces complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint over prepared old steel surfaces of any description, not otherwise described over 10cm width or girth and complete all as specified and directed.

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes inclusing taking down complete all as spd & directed.

All as per item No 95 above but 75mm dia bore pipe.

Suply and fix in repair 75mm bore PVC (SWR) bends any redious complete all as specified and directed.

Supply & fix in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Suply and fix in repair 110mm bore PVC (SWR) bends any redious complete all as specified and directed.

Supply & fix in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 110 PVC (SWR) vent cowl complete all as specified and directed.

Supply & fixing 500 litres capacity rotational moulded polyethylene water storage tanks in triple layers (cylindrical, vertical in closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks and removing to store complete all as specified & directed.

All as per item No 102.00 but for 1000 lt capacity PVC water tank.

Supply & fixing PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 15mm/20mm bore complete all as specified & directed. (Make : Prayag / Pearl)

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets. Complete all as specified and directed.

S&F 6mm thick Hollow insulated PVC wall lining consisting of PVC insulated panels having expended polystyrene (EPS) fitted into the wall by using nails etc complete all as spd & directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators etc removing material from site Complete all as specified and directed.

All as per item No.107.00 above but except conduit.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed/open conduit of any size/dia complete with all accessories / fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, FRLS, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / Bell point controlled by one, one way switch 05 / 06 Amps.

All as per item No.109.00 here -in- before but for One ceiling / Exhaust fan / Wall Fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No.109.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No.109.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per item No.109.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, FRLS, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / bell point controlled by one, one way switch 05 / 06 Amps.

All as per item No.114.00 here -in- before but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No.114.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No.114.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No.114.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed. Make- Anchor/ Havells/ Cona.

Supply & fixing multi socket outlet 5 pin (2 Pin & 3 Pin) , 05 / 06 Amps flush type 240 volts complete all as specified & directed by Engr-in-Charge Make- Anchor/ Havells/ Cona.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge Make- Anchor/ Havells/ Cona.

Supply & fixing of universal socket outlet , 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. Make- Anchor/ Havells/ Cona.

Supply and fixing bell push flush type , 5/6 amps , 240 volts all as directed Make- Anchor/ Havells/ Plaza..

Supply and fixing door bell ding dong type , 240 volts AC Make- Anchor/ Havells/ Cona/ Plaza.

Supply and fixing stepped type electronic fan regulator flush type AC, 230 volts, Switch/Socket type as per existing site requirement complete or all as specified & directed by Engr-n-Charge. Make Anchor/ plaza / leader/ Cona.

Supply & fixing lamp holder (Angular / Straight) (with metal ring), insulated body, with back plate for batten fitting all as specified and directed Make- Anchor/ Havells/ Cona/ Plaza.

Supply and fix decorative LED Tube light fitting 1x20 Watt , environmental friendly, energy efficient MS batten with retrofit with T8 polycarbonate tube-01 No, One end connection complete with all accessories and fixing material all as specified and directed Make:- Wipro / Crompton / Havells / Phillips..

Supply and fixing decorative LED tube light fitting 1x10 watt surface mounting , intigrated with opal diffuser complete with all acessories as specified and directed Make Wipro/ Havells / Crompton.

Supply & fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed Make- Anchor/ Plaza/ Cona / Havells.

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + 01 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable, FRLS, with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable, FRLS drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed.( Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length).

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed Make - ABB/ Havells/ Legrand.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed Make - ABB/ Havells/ Legrand.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc t match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed Make - ABB/ Havells/ Legrand/ Schneider.

Supply and fixing in replacement MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. Make - ABB/ Havells/ Legrand/ Schneider.

Supply & fixing in replacement MCB, DP ( Single Pole and Neutral), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed. Make- ABB/ Havells/ Legrand/ Schneider.

Supply & fixing in replacemetn Isolator 4 pole 'B' series 100 amps capacity AC 415 V,10kA complete all as specified and directed Make- ABB/ havells/ Legrand .

Supply & fixing in replacement industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed . Make ABB/ Havells/ Legrand/ Schneider.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.Note- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department .

S & F in repair, security light brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete, including distempering to match with existing surface all as specified and directed . Jindal/ Tata/ / Surya.

Supply and fix in repair decorative LED Tube light fitting 1x20 Watt , with opal diffuser, environmental friendly, energy efficient MS batten with retrofit T8 retrofit polycarbonate tube-01 No, one end connection complete with all accessories and fixing material all as specified and directed Make:- Wipro/ Crompton/ Havells / Phillips..

Supply and fixing in repair LED Tube rod 1x20 Watt, energy efficient suitable for MS batten with retrofit T8 polycarbonate tube, having both end connection, complete with all accessories and fixing material all as specified and directed by Engr-in-Charge. Make:- Phillips/ Crompton/ WIPRO.

Supply and fixing in repair LED Tube rod 1x20 Watt , energy efficient suitable for MS batten with retrofit T8 polycarbonate tube, having one end connection, complete with all accessories and fixing material all as specified and directed by Engr-in-Charge. Make:- Havells/ Crompton / C&S.

Supply and fix in repair LED lamp 9 watt of Make:- Crompton./ Havells/ Wipro

Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed. Make- Anchor/ Havells/ Plaza/ Cona.

Supply & Fix in repair socket outlet 5 pin, 05 / 06 Amps flush type 240 volts . Make- Anchor/ Havells/ Plaza/ Cona.

Supply & Fix in repair switch piano flush type, 15 / 16 Amps single pole, one way 240 volts Make- Anchor/ Havells/ Plaza/ Cona.

Supply & Fix in repair socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts Make- Anchor/ Havells/ Plaza/ cona

Supply & Fix in repair switch bell push flush type , 5 amps , 240 volts Make- Anchor/ Havells/ Plaza/ Cona.

Supply & Fix in repair door bell ding dong type , 240 volts AC Make- Anchor/ Legrand/ Cona.

Supply & Fix in repair stepped type (Switch / Socket type) electronic fan regulator flush type AC, 230 volts as per site requirement Make- Anchor/ Leader / Plaza/ Cona.

Supply & Fix in repair lamp holder (Angular / Straight), insulated body, with back plate for batten fitting Make- Anchor/ Plaza/ Cona/ Havells.

Supply and fix in repair fan capacitor 2.5 MFD single phase 230 volt , Make- Jyoti / Epcoss/ Havells.

Supply and fixing in repair LED security light fitting 1x45 Watt luminaries with die cast aluminium housing comprising epoxy powder coated enclosed with glass cover embedded lens in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed Make:- HPL/Havells / Crompton

All as per item No.153.00 above but capacity 25 watt. : Make:- HPL/Havells/ Crompton

Supply and fix in repair modular switch single pole 230 volt one way 6 A complete all as per exiting make at site or as specified & directed by the Engr-in-Charge. Make - Anchor (Roma)/ CONA / Indoasian.

Supply and fix in repair modular socket 3 pin Universal Socket, single pole 230 volt 6 A complete all as per exiting make at site or as specified & directed by the Engr-in-Charge.Make - Anchor (Roma)/ CONA / Indoasian.

Supply and fix in repair modular switch single pole one way 16 A 230 volt complete all as per exiting make at site or as specified & directed by the Engr-in-Charge. Make - Anchor (Roma)/ CONA / Indoasian.

Supply and fix in repair modular socket 6/16 A (2 -in-1 multipurpose) single pole 230 volt complete all as per exiting make at site or as specified & directed by the Engr-in-Charge. Make - Anchor (Roma)/ CONA / Indoasian.

Supply and fixing in repair surface mounting LED 2X2 luminaire 36 W CRCA powder coating housing with anti-glare diffuser with warm white LED,s including driver & including all acessories all as specified and directed Make:- Havells / Crompton / Syska .

Supply and fixing in replacement in wall mounted polycarbonate fancy light suitable for 9/10 watt LED Bulb and including 9/10 Led Bulb . (frame and light) complete all as specified & directed.make - Phillips , Model No - Comet 30575, or equivalent in Havells/Surya/Bajaj/crompton

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified & directed by Engr-in-Charge. Model - HEXA 10W, Make - Havells or equivalent in Crompton/Wipro.

S/F in repairs Round Surface mounted LED down light 10 watts, with white powder coated polycarbonate decorative housing and pressure die-cast heat sink having high efficiency with heavy duty driver .Model - INTEGRA NEO (SURFACE), Make - Havells or equivalent in Crompton/Bajaj/ Surya.

S/F in repairs Metal clad Plug (AC Plug), 20A, 2P+E, 230V AC . Cat Part No - 810386, Make - Indoasian / Legrand / HPL

Tayal Builders

Shivam Construction Co.

M/S AMAR ELEKTRO CENTRE

M/s D.K.Enterprises

R.D.Builders

High Tech Metal India