PROVIDING WATERPROOFING FOR RECORD ROOM and WHITEWASH IN COORIDOR IN PUNJAB AND HARYANA CIVIL SECRETARIAT BUILDING (PUNJAB SIDE), UNDER C-9 SUB DIVISION, CHANDIGARH.

Providing and applying water proofing treatment, after thoroughly cleaning the surface with wire brushes or other suitable material, thereby removing all the loose concrete, dirt, etc. After cleaning, first coat of primer shall be provided with equal mixing of Dr. Fixit URP or equivalent product with same quantity of cement. There after open fibermesh-150, size 2.5mm x 2.5mm, micro-reinforcement system for concrete made from 100% virgin polypropylene monofilament fibers shall be laid on the wet primer including overlapping of mesh as per manufacturers specifications, mesh shall be designed to control plastic shrinkage and settlement cracking. Thereafter 2 coats of acrylic polymer modified cementations coating of Dr. Fixit fast flex or equivalent product shall be provided. The material shall have properties like elongation at break 120% and 5 bar resistance to positive water pressure, adhesive strength ASTM D7234-0.8N/MM2, water vapour transmission as per ASTME96 of 0.7 perms and cracks bridging ability as per EN 1062-7 upto 2 mm. It shall be applied @0.42-0.50 Kg/Sqm in form of slurry. The work shall be got executed from authorised applicator of the company whose material is being used. There shall be span of 6-8 hours between 1st & 2nd coat, 2nd coat shall be laid perpendicular to 1st Coat. Coarse sand shall be sprinkled while the second coat is still wet. The application of material shall be air cured for 5 days and then ponding test shall be done, complete in all respect to the entire satisfaction of Engineer in Change. NS

Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in- Charge. DSR 14.13

Providing and Fixing chicken mesh on RCC beams, facias etc. wherever required with wooden gutties, nails and screws including drilling holes etc complete as per directions of the Engineer-in-charge.

Dashing Cement concrete 1:1½ :3 in R.C.C. beams, stairs, slabs, facias etc of average thickness 1” excluding steel reinforcement, centering and shuttering but including curing of the concrete complete in all respects and to the entire satisfaction of the Engineer in charge.

Pre-wetting the surface adequately and allowing to saturated surface dry conditions and applying coating of acrylic polymer based Acrocrete or equivalent make mixed with cement slurry @ 2 Kg. per bag of cement for proper bonding of old and new surface complete in position as per directions and to the entire satisfaction of Engineer-in-charge.

Removing rust from reinforcement bars by applying Liquid Rust Remover of Pidilite or equivalent make and cleaning the bars by scrubbing with wire brushes and washing with water and further repeating the process for heavily rusted bars till the rust free surface is achieved as per Manufacturers Specifications complete in all respects and to the entire satisfaction of the Engineer in charge.

Chipping loose concrete average 1” thickness of Facias – RCC beams- chajjas Stairs, Slabs, Columns - etc. removal of loose mortar and cleaning the surface thoroughly to remove dust particles complete in all respects and to the entire satisfaction of the Engineer in charge.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR 14.5.1

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) DSR 13.81.1

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat DSR 13.82.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work DSR 13.99.1

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 13.80

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 13.91

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR 9.83

Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of iron hinges, all necessary Aluminium fittings and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm DSR 9.96.2

Renewal of old putty of glass panes (length) DSR 14.9