GE (N) P/TOKEN- 50 OF 2024-2025REPAIRS TO BOUNDARY WALL CHAINLINK FENCING, PAVED AREA AND MISC WORKS AT 3EW BDE,HQ DMGSA, HQ SWAC, SC INT BN, SCSR, KG LINE, GHORPADI,GURUDWARA ROAD AND AREA OF AG B/R(EAST) UNDER GE(NORTH) PUNE

Amount

Demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

M&L for Pre-cast cement concrete block masonry with solid blocks type C-1, 1:3:6 (20mm graded agg) exc10cm in width and setting in mortar complete built in CM 1:6 in any description complete all as specified and as directed

Ditto all as per item No 02, here in before but except blocks complete all as specified and as directed

M&L for fly ash brickwork, straight or curved on plan exc 6m mean radius built in CM 1:6 in any description complete all as specified and as directed

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar in CM 1:6 complete all as specified and as directed

S&F for providing 35 mm thick precast cement concrete louvres and jallies type B0, 1:2:4(12.5 mm graded stone agg) (measured solid) set and cement mortar 1:4 including all mouldings & taking down old one complete all as specified and as directed

M&L for Providing, cement concrete 1:2:4, type B-1(20mm graded crushed stone agg) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water incl necessary scaffolding etc complete all as specified and directed

M&L for 15mm thick plastering in two layers of CM 1:4 on brick or concrete wall surfaces etc with 2% of WPC on cement incl necessary scaffolding etc upto 12 mtr height complete all as specified and as directed.(Note:WPC shall be measurned and paid in separatetly)

-Ditto- all as per item No 9, here in before but 15mm thick plaster in CM 1:6 on wall surfaces

Supply only integral water proofing compound

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed by Engr-in-Charge

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engr-in-Charge

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed by Engr-in-Charge

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in Charge

-ditto- all as per item No 17, here in before but plain sheet on roof ridge

Dismantling wrought iron steel or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L in repair for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W(Gde-E- 250) quality-A complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed

M&L for Cutting holes in brick walls exc half brick and n.exc full brick wall in cement or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge

Excavation of post holes (or similar holes) each n exc 0.5cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm for soft/loose soil complete all as specified and as directed

M&L for PCC 1:4:8, type D-2(40mm graded crushed stone agg) as in foundations,filling and mass concrete complete all as specified and as directed.

S & F Mild steel work for posts and struts in fencing of angle iron including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

S & F for mild steel galvanised chain link fencing of 3mm dia GI wire, 75mm x 75mm mesh size and weight not less than 2.5Kg per Sqm conforming to IS: 2712, galvanised coating of type heavy as laid down in IS: 4826 including line wires fixing to any type of standards, rails, straining bolts etc. including provision of binding wire, make as approved by GE including dismantling existing chain link fencing complete all as specified and as directed.

M&L for mild steel round bars10 mm dia and over, cut to length, bent to shape required, for stiffners and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05cm and n exc 10cm long, diameter of neck 5 to 10mm complete all as specified and as directed

S & F in repair for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. in aprons, barriers, gates and similar works etc (each line wire to be measured) complete all as specified and as directed

Restraining securing including making good staple etc. galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. in aprons, barriers, gates and similar works etc (each line wire to be measured) complete all as specified and as directed.

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

S & F in repair for mild steel 1.25mm thick plain, black sheet in wall cladding steel gate and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

M&L fo repair of Steel gate of any size , any shape and any position. Taking down steel gate and repair holdfast, uplifting of steel gate, welding to required member, repair/greasing to roller,repair and repositioning of Base Rail , make in true position to revolve, complete all as specified and directed by Engr- in - Charge.

M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips incl taking down old one complete all as specifed and directed by Engr- in -charge. Make:-Gyproc/Armstrong.

M&L in repair of POP false ceiling incl cornices & applying two coats of OBD over a coat of priming coat incl taking down old one complete all as specifed and directed by Engr- in -charge.

M&L for preparation of old plastered or unplastered surfaces of wall incl cornices, pillasters by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of OBD including filling of wall putty deepessions of scrapped surfaces incl necessary scaffolding etc complete all as specified and directed.

-ditto- all as per item No 37 above but applying in two coats of OBD complete all as specified and as directed

-Ditto- all as per item No 37 here in before but one coat of OBD on ceiling surfaces

M&L for complete removal of existing treatment on walls, preparation of surfaces and make surface free from loose particles, oil stains etc and surface ideally prewetted and applying white cementitious wall care putty average thickness 1.5mm complete all as specified and directed by Engr-in-charge.

M&L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint wall or ceiling incl necessary scaffolding etc complete all as specified and directed by Engr-in-Charge

M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint wall or ceiling incl necessary scaffolding etc complete all as specified and directed by Engr-in-Charge

M&L for french polishing on old wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying one or more coats of french polish till the desired finish is obtained incl necessary scaffolding etc complete all as specified and directed.

M&L for old wooden surface of any description, width or girth, application of resin pigment and hardener to desired colour spfd pattern and applying one or more coats of melamine polish with spray guns, compressor etc complete till glossy surface in obtained incl necessary scaffolding etc complete all as specified and directed

M&L for prepation of old decorated plastered/unplastered surfaces of wall and applying one coat of plastic emulsion paint incl necessary scaffolding etc complete all as specified and directed.

M&L for prepation of old plastered surface of wall and applying one coat of lustre paint incl necessary scaffolding etc complete all as specified and directed.

M&L for preparation of old wall surface of any description, width or girth, application of resin pigment and hardener to desired colour spfd pattern and applying one coat of acrylic emulsion paint(Apex) over a coat of primer with spray guns, compressor etc incl necessary scaffolding etc complete complete all as specified and directed

M&L for cleaning of blocked WC/Gully trap/Floor trap/Nahani trap upto and including first manhole by manual labour as well flushing with clean water making the WC seat, gully trap, floor trap operational complete all as specified and directed by Engr-in-Charge.

Taking out semi soild, liquid suspension sludge and foreign material from man hole/septic tanks/soakage well of any description and any depth including pumping out of water and removing materials either by the same in covered van or trolley at out side MoD land and burring the same (semi solid/liquid shall not be burried) in ground inc complete all as specified and as directed. (Note: The location at outside MoD land for disposal of forieign materials obtained above shall be located by the contractor himself)

Removing of vegitation/plantation on the wall, roof or any description upto three stories of building including necessary scaffoldings and roots superficial area n.exc 2.0sqm each and making good of surfaces by applying chemical treatment with GLYPHOSATE 41% incl removing / refixing of GI/CI pipe lines complete all as specified and as directed. (Note:Brick work, plaster and CI/GI lines shall be measured and paid separately)

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded agg) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm dia of bore pipe including demolition of existing old one with PCC complete all as specified and as directed.

-ditto- all as per item No 54 here in before but 200mm dia of bore complete all as specified and as directed.

M&L in repair for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition of existing old one (salt glazed earthware, AC or reinforced pipes etc) set in cement mortar complete all as specified and as directed.

-ditto- all as per item No 56 here in before but 200mm dia of bore complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting our existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC(1:2:4) type B-1, smooth finished and reforming benching as required for 150mm dia of pipe complete all as specified and directed.

S & F in repair 20 mm brass gun metal globe or gate valves with iron wheel head,screwed both ends for iron pipe and fixed .complete all as specified and as directed.

S&F 15mm bore tubes med grade galvanized ISI marked with all fittings in short length and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing as specified.

All as per Srl item No 60 here-in-before, but taking down and fixing only complete all as specified and as directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings in short length and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and as directed.

All as per Srl item No 62 here-in-before, but taking down and fixing only

M&L cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and as directed

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including P-trap (PVC) 100 mm dia., connection to flushing pipe, anti-syphonage pipe complete incl making good to floor complete all as specified and as directed

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white including trap, connection to drain (outgoing pipe) and to flushing pipe, anti-syphonage pipe, including PVC jet for Pedestal pattern pan including 450/600mm long PVC connection including PTMT nuts and plastic water closet seat of white in colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete complete all as specified and as directed

S&F in repair vitreous china wash hand basin white of bowl size 550mm x 440mm including waste coupling and PVC waste pipe 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy type for 15 mm bore pipe, including M S brackets complete complete all as specified and as directed

S&F in repair for hand shower, chromium plated (health faucet) of ABC body with 8mm dia 1.2 metres long spirochrome flex tube and wall hook all as per Cat No. ALD-587 of make Jaquar or equivalent as approved by GE complete all as specified and as directed.

S&F in repair brass chromium plated soap dish , fixed to wall with CP brass screws all as specified and directed. Make: Johnson Cat part No: T3252C Fusion series or equivalent of Makes as per Appx A as approved by GE

S&F in repairs brass chromium plated towel rail including built in side brackets complete all as specified and as directed. Make: Johnson Cat No.T1350C Delta Series or equivalent of Make as per Appx 'A' as approved by GE

S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Johnson Cat No.T1351C Delta Series or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs, chromium plated long body bib cock fancy type with wall flange 15mm dia complete all as specified and as directed. Make: Jaquar Cat No. CON-107KN ‘CONTINENTAL' series or or equivalent of Makes as per Appx A as approved by GE

S&F in repairs Pillar cock swan neck suitable for 15mm bore pipe long body fancy type brass CP with Capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete complete all as specified and as directed Make: Johnson Cat Part No T2804C Magna SERIES or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs brass chromium plated quarter turn pillar cock fancy type for 15mm bore pipe, complete all as specified and as directed. Make: Johnson Cat No. T4801C VIVA Series or equivalent of makes as per Appx 'A' as approved by GE.

S&F in repairs bib cock long nose suitable for 15mm bore pipe fancy type brass CP with, quarter turn screwed down for iron pipe or brass ferrule complete complete all as specified and as directed Make: Johnson Cat Part No T4806 VIVA series or equivalent of Makes as per Appx A as approved by GE

S&F in repirs wall mixer 2 in 1, quarter turn with provision for over head shower with bend pipe on upper side connecting legs and wall Flanges brass chromium plated suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Johnson Cat Part No T4821C VIVA series or equivalent of Makes as per Appx A as approved by GE

S&F in repairs central hole basin mixer brass chromium plated quarter turn with regular spout with popup waste system with 450mm long braided hoses suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No QQT-7169B Queens Series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair angle cock chromium plated cast copper alloy ISI marked with flange, high pressure screwed down complete complete all as specified and as directed Make: Johnson Part No T3910C or equivalent of Makes as per Appx A as approved by GE

S&F in repairs Two Way (2 in 1) bib cock suitable for 15mm bore pipe fancy type brass CP with wall flange , quarter turn screwed down screwed for iron pipe or brass ferrule complete fixed in repair and complete all as specified and as directed Make: Johnson or equivalent of Makes as per Appx A as approved by GE

S&F in repair cast copper alloy CP shower arm square 600mm long with wall flange complete all as specified and directed by Engr-in-charge. Make : Johnson or equivalent of Makes as per Appx A as approved by GE

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints, fixing to steel pipe or union complete all as specified and as directed Make Johnson Cat Part No S0006C or equivalent of Makes as per Appx A as approved by GE

S&F in repair Toilet paper holder of brass CP, all as specified and directed. Make:Johnson Cat part No: T3254C Fusion series or equivalent of Makes as per Appx A as approved by GE

M&L PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in sub base including demolition of existing concrete complete all as specified and as directed.

M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Dismantling existing interlocking paver blocks, removing rubbish off the premises and laying the same tiles/ blocks on existing places with repair of existing PCC for 60mm thick tile, in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile complete all as specified and as directed.

M&L for 18-20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl demolition of existing stone of any description complete all as specified and as directed.

M&L for non skid ceramic joint free tiles 10mm thick (square/ rectangular) polished, area of each tile exc 0.11 sqm but n.exc 0.16 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing floors over 20mm thick screed bed or bedding of layer in CM 1:6 and demolition of existing tiles complete all as specified and as directed.

M&L coloured Vitrified Double Charge tiles 10mm thick (square/rectangular) area of each tile exc 0.18sqm but not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete complete all as specified and as directed

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 and demolition of existing tiles complete, complete all as specified and as directed

S&F in repair aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section incl taking down old one complete all as specified and directed by Engr-in-Charge.

S&F in repair for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc incl taking down old one complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

M&L for pre polished chequred tiles of size 300x300x10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing floor and including 20mm thick screed bed and bedding of layers in CM 1:6 including demolition of existing tiles complete all as specified and as directed. Make: Jhonson endura textured design or equivalent

S&F for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 including dismantling existing steel complete all as specified and as directed.

S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.4mm & fixed with stainless steel wire staples in any height of Bldg all as specified & directed.

S&F in 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames in any heiht of Bldg complete complete all as specified and as directed

S&Fin rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete incl dismantling existing water tank all as specified and directed.

-Ditto- all as per srl item No 96 here in before but 1000ltr capacity complete all as specified and directed

S&F in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

S&F in repair for glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Gauri Associates (BID ID -3263721)

M/s Akshay Contruction (BID ID -3263284)

M/s.BAJRANG CONSTRUCTION (BID ID -3263190)

L.T Associate (BID ID -3258444)

THE SAIRAM CONSTRUCTIONS (BID ID -3262419)

SBS Enterprises (BID ID -3263378)

K.K.Enterprises (BID ID -3257426)

DURGA CONSTRUCTION & TRANSPORT (BID ID -3263830)

ANIL CONSTRUCTION CO. (BID ID -3257789)

Parhar Enterprise (BID ID -3258078)