REPAIR/MAINT OF MISC B/R WORKS AT MES IB, EC OFFICERS MESS, AOI AND REPAIR TO FOOTPATH, HARDSTANDING, PCC, CHAIN LINK FENCING, PRECAST JALLI, IRON GRILL, DECORATIVE PCC TILE FOOTPATH UNDER ZONE-II OF AGE B/R-II UNDER GE (FW) KOLKATA

Amount

Dismantling floor hearth or wall tiling of any description of any thickness incl cement mortar bedding etc all as specified.

Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Dismantling wrought iron on MS work of any descrpition not otherwise provided for complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/slabs any thickness incl cover/support fillets, complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone concrete or brick surrounds,glazed with putty or fixed with beads.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Dismantling AC corrugated roof sheets as in roof coverings including AC ridge complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section ,including taking out embedded portion and making good disturbed ground post embedded in concrete, complete all as specified and as directed.

-ditto- but embedded in natural ground

Dismantling of fencing, wire mesh any type including flat iron fillets, ms rod, nuts & bolts etc complete all as specified and as directed.

Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris outside MOD land complete all as specified and as directed.

M&L Vitrified ceramic, colored tiles, light shade 10mm thick (square/rectangular ) polished, area of each tiles exceeding 0.36 Sqm and but not exceeding 0.42 Sqm in floors etc set and jointed in neat cement slurry, laid over and including screed bed 20 mm thick in cement mortar 1:6 and pointed in white cement with pigment to match the surface complete all as specified and as directed.

M&L Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, coloured tiles as in floor etc, set and jointed in neat cement slurry, laid over and including screed bed 20 mm thick in cement mortar 1:6 and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L Glazed Ceramic colored tiles of size 300x450x7mm thick in vertical surfaces, set and jointed in neat cement slurry, fixed over and including 15 mm thick screed bed in cement mortar 1:4 as backing layer and pointed in white or colured cement to match complete all as specified and as directed.

M & L 18-20mm thick granite slab (table rubbed and polished) in pillars, window cills, cooking platform, stair steps etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing, laid over and including 15mm thick screed in cement mortar (1:6) complete all as specified and directed.

S&F in repair 10mm thick toughened glass door and partition, set and jointed with adhesive including fixing accessories, connections and builders hardware complete all as specified and as directed by Engineer-in-Charge.

S&F in repair chromium plated brass over head shower rose with arm (premium quality), with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104A / HINDWARE, cat No: F160051 or equivalent model in JAQUAR)

S&F in repair Chromium plated brass Wall mixer (premium quality), concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No : KUP-35125PM /CERA, Cat No: F1005413 / PRAYAG, Cat No: 9880 /HINDWARE, Cat No: F360019 / ASIAN PAINTS, Cat No: SRWM104 or equivalent model in PARRYWARE) NOTE: Telephone shower shall be measured and paid seperately.

S&F fancy type chromium plated telephonic hand shower (premium quality), multiflow type with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed. (Make : JAQUAR, Cat No: HSH-1739 / CERA, Cat No: F7030310AB / ASIAN PAINTS, Cat No: BHTS101 / HINDWARE, Cat No: F160047 / PRAYAG, Cat No: BHS-87 or equivalent model in PARRYWARE)

S&F in repair Chromium plated brass Angular stop cock (premium quality), concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: KUP-35053PM / CERA, F1005201 / ASIAN PAINTS, SRAC101 / HINDWARE, Cat No: F360006 / PRAYAG, Cat No: 9810 or equivalent model in PARRYWARE)

S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : JAQUAR, Cat No: CON-083FTK / PARRYWARE, Cat No : G1461A1 / ESS ESS, Cat No: T-108 / CERA, Model: OCEAN / PRAYAG, cat No: 9218/ HINDWARE, Cat No: F330052)

S&F in repair aluminium door closer hydraulically regulated designation No.3 universal type suitable for door shutter of 851 to 1000mm in width and of weight of 61 to 80 kg complete all as specified and directed.

S&F CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, cat No: BEA-26)

S&F in repair CP waste coupling for stainless steel sink complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / JAQUAR. Cat No: ALD-705/ CERA, Cat No: F8050101)

S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : ACN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003)

S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : JAQUAR, Cat No: ACN-1121N / CERA, Cat No: F5002105 / ASIAN PAINTS, Cat No: SQTW201 or equivalent model in PARRYWARE / PRAYAG)

S&F in repair 15mm bore chromium plated central hole basin mixer (premium quality) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : JAQUAR, Cat No: 35011BPM / CERA, Cat No : F1005451 / ASIAN PAINT, Cat No: SRBM101 / HINDWARE, Cat No: F360011/ PRAYAG, Cat No: 9851 or equivalent model in PARRYWARE)

S&F in repairs Chromium plated brass Pillar tap (premium quality), fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : JAQUAR, Cat No: OPP-15001PM / CERA, Cat No: F1005101/ ASIAN PAINTS, Cat No: SRPC101 / HINDWARE, Cat No: F360001 / PRAYAG, Cat No: 8102 or eqivalent model in PARRYWARE)

S&F in repair 15mm bore chromium plated two way bib cock with flange (premium quality), fancy type complete all as specified and as directed. (Make : JAQUAR, Cat No: FUS-29041 / CERA, Cat No: F1015163/ ASIAN PAINTS, Cat No: ALBC102 / PRAYAG, Cat No: 9311-N/HINDWARE, CAT No: F360005 or equivalent model in PARRYWARE)

S&F in repair Chromium plated brass Bib cock with wall flange (premium quality), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: FUS-29037 / CERA, Cat No: F1015151/ ASIAN PAINTS, Cat No: ALBC101 / PRAYAG, Cat No: 9306-N/HINDWARE, CAT No: F360004 or equivalent model in PARRYWARE)

S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-CHR-593/ CERA, Cat No: F8030401AB / ASIAN PAINTS, Cat No: C-232N / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160013 or equivalent model in PARRYWARE)

S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-103 / PRAYAG, Cat No: BA-35 or equivalent model in CERA /HINDWARE)

S&F in repairs 15mm dia soap dish, chromium plated body complete all as specified and directed. (Make : PRAYAG, Cat No: BA-05 / CERA, Cat No: F5003106 / ESS ESS, Cat No : AC-503B)

S&F in repairs towel rack (premium quality) with lower hangar with hook incl taking down existing rack complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12)

S&F in repair Special designed Acrylic shelf of size (56Cmx13Cm) with CP wall flange all as directed by Engineer-in-Charge (Make: ESS ESS, Cat No: AC-107 / PRAYAG, Cat No: BEA-45 or equivalent model in CERA /HINDWARE / PARRYWARE)

S&F corner glass shelf 300 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102)

S&F and fixing in repair chromium plated tumbler holder with glass tumbler & wall flange complete all as specified and directed. (Make : JAQUAR, Cat No: ACN-1141N /ESS ESS, Cat No: AC-504 / PRAYAG, Cat No: BA-26G or equivalent model in PARRRYWARE / CERA / HINDWARE).

S&F in repair connector pipe 450mm long copper connection 15mm dia with nut and rubber brass coupling at both ends for basin and geyser all as directed by Engineer-in-Charge. (Make: JAQUAR, Cat No: ALD-803AB / PRAYAG, Cat No: BMC-03 / CERA, Cat No: F8070403 or equivalent model in PARRRYWARE / HINDWARE).

Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)

-ditto- all as per Item No. 80 here in before but 600mm long. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON)

S&F in repair chromium plated 3mm thick robe hook (2 way) fixed to wall for hanging purpose complete all as specified and directed. (Make : ESS ESS, Cat No: AC-105 / JAQUAR, Cat No: CAN-1161N / CERA, Cat No: F5002108 / PRAYAG, Cat No: BA-87 / HINDWARE, Cat No: F870007 / PARRYWARE, Cat No: T6007A1)

Supply and Fixing in repairs, Tubular towel rail (premium quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 )

S&F 25mm dia brass curtain rod alongwith and supports and rings at a gap of 4" fixed with necessary beadings complete all as specified and as directed. (Make: Vista sherwood or equivalent make as approved by GE)

S&F Brass decorative brackets for fixing curtain rod fixed to wall with screw, nails etc complete all as specified and directed. (Make: Vista sherwood or equivalent make as approved by GE)

M & L french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces incl a coat of wood filler on new works with one or more coats complete all as specified and directed.

-ditto- but on old surfaces with one or more coat to achieve glossy finish

S&F in repair aluminium anodized window/ ventilators frame with size 63X38X2mm thick with Aluminium Sliding shutter frame 38mmx20mmx2mm thick with hold fast snap beading surfaces gasket handle locking arrangement stay peg etc incl glazing clip for fixing in repair complete all as specified and directed. (NOTE: Sheet glass shall be measured and paid seperately)

S&F 12mm thick perforated particle board 600mmX600mm size fixed to Alum/wooden framed ceiling including applying two coat of synthetic enamal paint over one coat of pink primer as directed by the Engr-in-charge.

Supply and Fixing PVC solid wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction and as directed by the Engineer-in-Charge.

Supply and Fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F 10 to 12mm thick gypsum board false ceiling including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces complete all as specified and as directed.

S&F 4mm thick decorative `E' board of size 600x600mm incl aluminium snap grid made of aluminium main `T' 38x25x2mm thick and cross Tee and angle of section 24.5x24.5x1.4mm thick incl proper hanging arrangement (with 4mm dia galvanised iron wire and suitable adjuster) and incl applying two coat of acrylic distemper complete all as specified and as directed.

M&L Providing edge moulding to 18-20mm thick granite stone of counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete complete all as specified and as directed.

S&F Block boards 18 to 19 mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work (as in cup board) complete all as specified and as directed.

S&F Decorative laminate type 1 (0.90 mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30 mm complete all as specified and as directed.

S&F stainless steel handle 150 mm long decorative type complete all as specified and as directed.

S&F multi purpose cupboard lock, brass complete all as specified and as directed.

S&F cupboard magnets heavy duty complete all as specified and as directed.

S&F Stainless steel tower bolt 120 mm long, heavy duty complete all as specified and as directed.

S&F in repair aluminium anodised door frame size 100mmX63mmX2mm thick and shutter size 50mmX45mmX2mm thick as in top rail and style and 100mmX45mmX2mm thick in bottom and lock rail including complete fitting and fixtures and mortice lock, 'D' type handles, hydraulic door closure and including 5 mm thick glass panes incl dismantling of existing door frame complete all as specified and directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of sheet glass)

M&L in repair aluminium, anodised partition with frame of size 63X38X2mm thick and fixing hold fast with snap beading rubber gasket etc incl dismantling of existing partition frame complete all as specified and directed. (NOTE: Sheet glass/particle board for partition shall be measured and paid seperately)

S & F ornamental MS framed work such as grills, gate, gratings etc with end of bars shouldered and revets welded etc framed guard bars barrel iron door ladder framed balusters walk ways, railing etc all as specified including taking down existing frame work complete all as specified and directed.

Cutting holes in brick wall exc. Half brick work but not exc one brick work built in cement mortar for inserting hold fast and making good to dismantaled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed.

S&F hold fast for window & doors, made to shape as required all as directed at site.

S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )

S & F 200 mm long Brass barrel tower bolts, with barrel of extruded section and rolled or cast bolts and fixed complete all as specified and directed.

-ditto- but 150 mm long -ditto-.

S&F 250 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

-ditto- but 300 mm long -ditto-.

S&F 100 mm long butt hinges MS medium weight cold rolled complete all as specified and directed.

-ditto- but 75 mm long -ditto-.

S&F 150 mm Extruded brass handles, fabricated type polished complete all as specified and directed.

S&F in repair classic Cylindrical lock made of brass complete all as specified and directed. (Make: GODREJ, Cat No:3791 or equivalent in other makes specified in tender)

Supply and fix pressure booster pump with 1 HP 50-60 HZ, Voltage 220V, single phase, discharge capacity 0-6 m3/hr, 25 mm dia delivery pipe (of length 5.00 meter ) pressure switch of dynafoss, pressure dial gauge (ranging from 0 to 100 lbs per square inches) and testing on completion as in repair complete all as specified and as directed by Engineer-in-Charge. (Make: Crompton Greaves, Model No - 10 Minimarket I-025 or equivalent model in KSB / KIRLOSKAR)

M&L for 20 mm thick italian marble (of any type) work (table rubbed and polished) for Flooring, laid over and incl 20mm thick screed bed in cement mortar (1:3) and fixed with 5 mm thick spacers and gap to be filled by epoxy dazzling grout (with includes 2 component resin and hardner mixed in ratio 1:4 and dazzel per 200 gms for 1 kg grout mixture pointing with match with shade of Marble) complete all as specified and directed.

S&F 5.5mm thick looking mirror of size 450mmx600mm over AC bulding board or commercial ply wood and fixed with PVC/wooden plugs with CP brass screws and cup washer including taking down old one complete all as specified and directed.

S&F in repair solid seat and cover, white, for pedestal pattern water closet complete all as specified and directed.

-ditto- but coloured seat cover for pedestal pattern water closet

S&F in repair Plastic seat & cover, white, soft close type, for coupled/one piece water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 or equivalent model in JAQUAR / CERA / HINDWARE)

S&F in repair Solar control film 50 micron reflective type sticked to glass panes as per manufacturers instructions all as specified and as directed.

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair double action floor door spring hydraulically regulated made up of minimum alloy steel foundation box main body with stainless steel covergovering pirot made of brass other part of MS heavy duty and fixed as directed by the Engr-in-charge.

M&l for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L applying one coat of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint including preparation of old painted surface complete all as specified and directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint, complete all as specified and as directed.

S&F in repair vitreous china floor mounted rimless one piece closet (Pedestal pattern), white including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings complete all as specified and directed. (Make : JAQUAR, Model : OPAL / HINDWARE, Model: SPELNDOUR or equivalent model in PARRYWARE / CERA)

S&F in repair Syphone for vitreous china flushing cistern of coupled type/single piece water closet complete all as per specified and as directed.

S&F in repair 45mm thick precast cement concrete Type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, but excluding frame set in cement morter 1:4, complete all as specified and as directed.

M&L for brick work with sub class `B’ bricks (fly ash), straight on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for use and waste for form work to sides and soffits of floor or roof beams , beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams for rough finished surfaces of concrete flat complete all as specified and directed

M & L for RCC 1:1½:3, type A1 (using 20mm grade stone aggregate) as in beams, cantilevers, bressummers , lintels over 1.5 mtr span complete all as specified and as directed.

M&L Pre-cast RCC 1:1½:3, type A1 (using 20mm grade stone aggregate) by volumetric mix as in Cover Slab of drain, Man Holes, Septic Tanks, etc., set in Cement Mortar 1:4 including necessary forms, moulds, etc., complete all as specified and as directed.

M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

All as per Item No. 105 above but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.

Excavating in post hole (or similar hole) each nexc 0.5 cum getting out, returing,filling in and raming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 M and making good surface in soft and loose soil complete all as specified and directed.

M&L PCC 1:3:6 type C2 (Using 40 mm graded aggregate) in Foundation, filling and mass concrete complete all as specified and directed.

S & F MS angle, flats,etc independently fixed without connecting plates etc but ordinary length conforming to FE-410-W(Gde-E-250) quality A as in fencing posts including drilling holes for nuts and bolts and similar work complete all as specified and as directed.

Fixing only RCC post or angle iron post (obtained from item No 108).

M&L Mild Steel Screw Bolts (machine made) 11mm to 15mm diameter of neck and length of bolt exc 5 Cm and not exc. 10 Cm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed.

S & F MS 10 mm dia round bar and fixed independently to angle iron for chain link fencing cut to length,bend to shape required, complete all as specified and as directed

Supply and fixing in repairs galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc. incl taking down existing fencing complete all as specified and directed. (Note: - Each line of wire will be measured)

S&F 4mm dia PVC coated galvanised mild steel chain link fencing of mesh size 50x50mm fixed with straining bolts including line wire any mesh size and type to any type of standards, rails, straining bolts etc.including provision of binding wire, complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.

Refixing of old serviceable chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.

S&F in repairs anti-rust concertina coil (reinforced punched barbed tape single layer) for fencing work incl taking down existing coils complete all as per following specifications :- (i) Diameter of concertina coil - 600 mm dia (before stretch) (ii) Number of turns in concertina - 50 to 53 turns (iii) Weight of each coil - 9.5 to 10 KG (iv) Coverage per coil - 6 m (v) Central core wire - made from high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanised (conforming to IS-2629) with diameter 2.59 mm + 0.05 mm, UTS 145-160 kg/sqmm, zinc coating 250-300 grams/sqm (vi) Strip - Electro galvanised steel strip 0.5 mm + 0.02 mm thick, width 19 mm (before wrapping on central core wire) conforming to IS-1573, zinc coating - 120 gram/sqm and bituminised dipped, width of barbs 11.5 mm, pitch of barbs 25.4 mm+ 0.2 mm

Item No. 116 (contd....) (vii) Clips - AISI 304-1.5 mm thick 'C' & 'U' clips. 'C' special type for fixing coil and RBT wire, 'U' clips special type for joining one coil to another coil and RBT wire to RBT wire joining. (viii) No. of clips - 125 for each coil (ix) Handle and spikes to be provided as required (NOTE : 1. The concertina coil shall be given additional primer treatment of epoxy/ polyurethane and final paint top coat of caufiled green shade (BSL 139) by hot dipping process. 2. RBT wire for fixing of concertina coil will be measured and paid seperately. 3. Running length of the wall shall be measured for payment purpose.

Supply only epoxy/polyurethane coated RBT wire of high tensile strength of 165 kg/sqmm with tape (0.52 mm thick) and weight complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2, 40mm graded aggregate, as in floor/sub-base, finished even and rough complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B2, 40mm graded aggregate, as in floor/hard standing, finished even and smooth without using extra cement complete all as specified

M&L for providing PCC (1:3:6) type C-2 as in surface channels and drains including necessary from work complete all as specified and as directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed

Add or deduct for 25mm girth or part there of over or under 30cm girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc. complete all as specified and directed

M&L for reinforced concrete hume pipe class NP-2 laid & jointed complete with collar bore of pipe 450mm complete all as specified and as directed.

M&L for concrete bed to drain pipes incl packing under and haunching against the sides of pipe after they and laid tested in cement concrete 1:4:8 type D-2 (bore of pipe 450mm) complete all as specified and as directed.

Taking down cement or cement or cement lime plaster on brick or stone walls, etc. including raking out joints, haking for key, scrubbing down with water, etc.

M&L 5 mm thick rendering in cement mortar (1:3) to brick or concrete celling surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

M&L 15 mm thick rendering in cement mortar (1:6) to brick or concrete wall surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

M&L 15 mm thick rendering in cement mortar (1:4) to brick or concrete wall surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

S&F in repair Providing precast reinforced cement concrete RCPC drain cover 100 mm thick of size 900mm x 600 mm as in drain cover with capcity 3MT complete all as specified and as directed.

S&F in repair for Providing precast reinforced cement concrete RCPC drain cover 100 mm thick of size 600mm x 450 mm as in drain cover with capcity 3MT complete all as specified and as directed.

Supply and fixing 20mm thick pre-polished decorative cement concrete tiles of size 300mmx300mm, as in flooring, laid over & incl 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, complete all as specified and as directed.

M&L 25 mm thick pre polished coloured chequred tiles of size 400X400 jointed and pointed in neat cement slurry with white or coloured to match the shade of tiles, laid over and including 20 mm thick screed bed in cement mortar 1:6 completed all as specified and directed.

S&F 15mm thick pre-polished decorative cement concrete tree guard tiles of approved size, design and colour laid on vertical surfaces over & including 15mm thick backing layer in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with admixture of pigment to match the shade complete all as specified and as directed.

Taking out precast interlocking paver block, any size, and keeping aside for re-use or removal from site complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS:15658-2006 of 60 mm thickness M-35 Grade with grey cement and pavement complete all as specified and as directed. (NOTE: Sand cushioning, if required shall be measured and paid seperately)

M&L Sand filling under floors under paver block, thickness not exc 40 mm including consolidation complete all as specified and as directed

Relaying paver block in patches, including removing and cleaning old paver block, preparing beds and laying or setting, jointing new or old paver blocks complete all as specified and as directed. (NOTE: Sand cushioning, if required shall be measured and paid seperately)

Material and labour for grinding/polishing and cutting to existing stone floor of any description (such as kota stone, marble stone, terrazo, granite and similar surfaces etc) cleaning with water and applying zinc oxide powder complete all as specified and as directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) with joints to match complete all as specified and as directed.

S&F in repair vitreous china half pedastal pattern wash hand basin, with half pedestal incl providing 32mm dia CP waste coupling, bracket, waste pipe and making all necessary connections, fixed as directed by Engr-in-Charge. (Make : JAQUAR, Model: SOLO / Parryware, Model : AVON N / CERA, Model: CONCORD / HINDWARE, Model: STUDIO)

S&F in repair Vitreous China table top Wash Basin 560 x 340 mm in size, White with 32mm dia Brass Chromium Plated Waste Fitting and 32 mm dia PVC waste pipe, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed. (MAKE : CERA, Model: CAYDEN / PARRYWARE, Cat No. C8845 / HINDWARE, Cat No. 10104 / JAQUAR, Cat No. CUBIX)

Taking down carefully aluminium doors, partitions and glass partitions, disconnecting all members and re-fixing in same opening complete all as specified and directed.

M&L for complete removal of old distempered surfaces and applying 2 mm thick coat of plaster of paris, finished even and smooth complete all as specified and directed.

M&L Preparing new plastered surfaces of wall and and applying Two Coats of plastic emulsion paint over a coat of primer complete all as specified and as directed.

M&L preparation of old painted / plastered surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of plastic emulsion paint all as directed by Engr-in-Charge.

M&L for preparation of old treated wall surfaces and applying one coat of acrylic distemper complete all as specified and directed.

M&L for preparation of old treated ceiling surfaces and applying one coat of acrylic distemper complete all as specified and directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B1, using 20 mm graded stone aggregate, as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and necessary formwork complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for brushing cement slurry @ 3 Kg/sqm over cleaned roof surface prior to application of concrete complete all as directed by Engineer - in - charge .

M&L for Providing Cement Concrete, Type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), as in roof padding mixed with water proofing compound and the concrete surfaces is to be finished even and fair (without using extra cement) complete all as directed by Engineer - in - charge . (NOTE: WPC Shall be measured & paid separately)

M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregates) as required complete all as specified and directed.

M&L 15 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)

M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane.

Excavation in trenches n exc 1.50 m wide and n exc 1.50m depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exc 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in soft/loose Soil, complete all as Specified and as directed.

Returning filling in incl spreading , levelling , watering and well ramming in layers not exc 25 cm as in soft/ loose Soil, complete all as Specified and as directed.

Removing excavated materials not exc 50 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.

Returning filling in incl spreading , levelling , watering and well ramming in layers not exc 25 cm as in soft/ loose Soil, complete all as Specified and as directed.

Removing excavated materials not exc 50 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.

S&F 5.5 mm thick plain tinted sheet glass for Aluminium door/partition/ window complete all as specified and as directed.

S&F 4 mm thick plain tinted/frosted sheet glass for Aluminium window/ventilator complete all as specified and as directed.

S.K. TRADERS

M/S RAJ CONSTRUCTION AND COMPANY

SHEIKH ENTERPRISE

GHOSH ENTERPRISE

DEB AND COMPANY

MAZUMDER ENTERPRISE

MARUTI ENTERPRISES

BASU AND CO

MS AP CONSTRUTION AND CO