Renovation of Kitchen Room and Painting other civil work in B4 in ISI Campus Delhi Centre New Delhi 110016

Amount

Removing dry or oil bound distemper, water proffing cement paint and the like by scrapping, sand preparing and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Approved samples : - WALL PUTTY BIRLA WHITE/ J.K WHITE/FERROUS CRETE/ SARA PUTTY

Distempering with 1 quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre of approved manufacturer and of required shade and colour all complete to achive even shade and colour Approved samples : - ASIAN PAINTS/BERGER PAINTS/SHALIMAR

New work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Approved samples : - ASIAN/BERGER/ ICI( DULUX)/ NEROLAC/ ALTEK

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

12 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the anufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Approved samples : - KAJARIA/H & R.JOHNSON/NITCO/ SOMANY./VARMORA

Dismantling stone slab/tile work in flooring/roof laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete Approved samples : - H & R JOHNSON/KAJARIA/NITCO/ VARMORA/SOMANY

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Approved samples : - ACC, ULTRATECH,VIKRAM, SHREE CEMENT, AMBUJA, JYPEE CEMENT, CENTURY CEMENT AND J.K. CEMENT

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Approved samples : - ASTRAL/ AJAY FLOWGUARD / ASHIRWAD/ PRINCE/SUPREME/FINOLEX/SFMC

Concealed work, including cutting chases and making good the walls etc.

20 mm nominal dia Pipes

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

15 mm to 40 mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. Approved samples : - JAQUAR /KOHLER/GROHE/TOTO/ PARRYWARE/ROCA/CERA

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Approved samples : - JAQUAR/HINDWARE /KOHLER/GROHE/TOTO/ PARRYWARE/ROCA/CERA

15mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Approved samples : - NEELKANTH/NIRALI/CERA/HINDWARE

Kitchen sink without drain board

610x510 mm bowl depth 200 mm

Providing and Fixing C P Waste Coupling 32 mm Full Brass

Providing and Fixing Stainless Steel 304 Grade Chrome Polished CP Jali 4 inch

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : Approved samples : - DORMA /HAFELE /GEZEI/KICH/GODREJ/HARDWYN /BECKER FIRE SOLUTION/MARSHALL

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : Approved samples : - DORMA /HAFELE /GEZEI/KICH/GODREJ/HARDWYN /BECKER FIRE SOLUTION/MARSHALL

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : Approved samples : - DORMA /HAFELE /GEZEI/KICH/GODREJ/HARDWYN /BECKER FIRE SOLUTION/MARSHALL

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge.

With cement mortar 1:4 (1cement: 4 coarse sand)

Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture.

Malaba removing out of the campus including all waste material (cement mortar, building malaba,chinasanitaryware/wooden pmaterial/brken pieces glass/waste jute) dumped at approved municipal dumping ground (including loading/unloading and transporation)and GI/CPVC/IRON Material may be dumped at ISI store Room.

Providing and Fixing of CP concealed body and exposed Part-1/2 '' full set

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

With 2nd class teak wood beading 62X19 mm

Providing and fixing curtain rods of 1 .25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete

25 mm dia (heavy type)

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc, complete as per design approved by Engineer-in- Charge.

Granite work

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required Size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm

Granite of any colour and shade

Area of slab over 0.50 sqm

Anguri Enterprises Pvt. Ltd.