ELECTRICAL WORK

Amount

The following work is to be carried out at 132KV S/S Bhoor.

Servicing of ductable AC having capacity (2x5.5 ton =11 Ton) by cleaning of filter of cooling coil by blower and washing of out door units of above 02 Nos. 5.5 Ton AC using suitable standrad chemical & also clean of condensing coil cooling fan.

N-2 testing of leakage by holding pressure of N-2 up to 24Hrs of 02 No, 5.5 Ton air conditioner and repair of them if required and filling of N-2 and hold pressure of N-2 up to 24Hrs.

Filling of Mefron gas R-22 in Air conditioner above 02 No, 5.5 Ton.

Dismentaling of indoor unit of 02 Nos, 5.5 Ton ductable air conditioner for cleanning, checking and reapairing.

Cleaning, checking of leakage of 01 No, 5.5 Ton indoor unit of airconditioner.

Cleaning of inside surface of air supply ducts of air conditioner system broad in fall ceilling of control room bulding, using high power vaccum air compresor, robotic camera, air hammer, spacial nozzels and air sweep with all other accessories required for inspection of ducts before and after cleaning.

Repair and recondioning of dryer and walve set of 01 No 5.5 Ton air conditioner

The following work is to be carried out at 132KV S/S Bhoor-II

Cleaning and checking outdoor and indoor unit and cleaning of air filter of 2.0 Ton capacity split air condition with Nylon brush, soap and water and repairing of deteriorated filter if required with skilled technician.

Checking of leakage refrigerant and brazing of any leakage point perfectly of split A.C. and all other associated work including cost of material and skilled labour.

Laying of Drain pipe with PVC hard pipe up to 25 mm dia with all accessories complete near trap/gully trap as per the site condition including canvas connection electric vabling and dismantling of old machine including all civil work.

Recharging of refrigerant in sufficient quantity and best quality in compressor of split AC including cost of material and skilled labour.

Replacement of capictor of electrically out door control unit.

Replacement of burnt/damaged stablizier capacity 4 KVA input voltage 140 to 290 V including all materials labour and T&P provided by the contractor at his own cost.

M/S LALIT ELECTRICALS

FK MECHANICAL WORKS