REPAIR TO DRAIN PATH AND HARDSTANDING JOINERY FITTING AND PLUMBING WORK IN BR II AREA UNDER GE AF GORAKHPUR.

Amount

Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 Sqm each and removing from site complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Cutting out old steel hinges (projecting type) from existing windows, S&F new hinges and welded, including cutting out and making good the jamb portion where required and making complete serviceable including applying two coats of synthetic enameled paint complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples, wooden beading all as specified and directed

Hacking out old broken glass from metal or wooden frames including punching or drilling out old glazing pins/spring clips or with putty complete all as specified and as directed.

S&F 3mm thick sheet fiber glass, ordinary quality and glazing with oil putty in square n. exc. 0.80 Sqm in each panes fixed any bldg height complete all as specified and directed.

M&L in repairs Harrison rails ( curtain rod) stainless steel , chromium plated with fixing brackets stops rollers etc draper rod of 20 mm dia including bracket stops rollers etc complete

M & L for construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc, as in apron.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L Non-skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles complete.

M&L Non-skid ceramic coloured ceramic tiles( square/rectangular) polished in vertical surfaces (dado/skirting) etc etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including laying of 10 mm thick screed bed cement plaster (1:3).

M&L for glazed ceramic coloured tiles in vertical surface 350 x250 x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:3 complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor, wall, aprons etc complete all as specified and directed.

M&L for 20mm thick granite stone (any type of work) in steps, jambs, pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of stone slabs (Kota/granite etc) one judge such as in steps, cooking platform and other similar situations

S&F in repairs HDPE PVC lid (cover) for 500 to 1000 Liters capacity PVC tanks, complete all as specified and directed by Engineer-in-Charge.

S&F in repair toilet paper holder of brass chromium plated fixed to walls with CP brass screws, complete all as directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 with waterproofing compound @ 200 ml/bag of cement complete all as specified and directed. Note : water proofing compound is to be paid separately.

M&L for Raking out joints/ flush pointing to brick tiles laid flat layer in roof flush pointing in cement mortar (1:3) , mixed with linseed oil @ 3% wt of cement including finishing surfaces even and fair without using extra cement inclusive linseed oil complete all as specified and directed .

M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete.

M&L plastering 15 mm thick on other than fair faces of brickwork or concrete surfaces of wall in cm 1:6 and finishing the surface even and smooth without using extra cement and finally providing sagely finish complete

M&L for preparation of new surface of wall and applying two coats oil bound distemper over one coat of primer with wall care putty complete all as specified and directed. ( Make: Asian paints/Nerolac paints/Shalimar Paints)

Taking up or down steel tubing and connections, 15 mm bore including cleaning for re-fixing or removal or store.

S&F for CPVC outer dia 20mm pipe SDR 11 & plain CPVC SDR-11 , with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only GI tubing medium 15 mm bore with all fittings to wall/ceiling or laid in floors completed all as specified and directed

S&F 15mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed.

Taking up or down steel tubing and connections, 20 mm bore including cleaning for re-fixing or removal or store.

Fixing only GI tubing medium 20 mm bore with all fittings to wall/ceiling or laid in floors completed all as specified and directed

S&F 20mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed.

S&F in repairs 15 mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered ' Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete.

M&L in repair 32 mm dia waste coupling of PTMT (Half or full threaded) ( Minimum weight 32 mm 45gms/40mm-60gms)

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm in repair complete all as specified and directed

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm in repair complete all as specified and directed.

S&F in repairs bottle trap of PTMT having minimum water seal of 25mm (min weight 32mm-260gms/ 40mm 270gms)

M&L in repair PVC 10 Liters valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repairs

S&F in repair 15 mm bore brass fancy type, chromium plated bib taps, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm bore wall mixture fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered ' Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete.

S&F in repairs cast copper alloy chromium plated caste copper alloy screwed high pressure with crutch or butter fly fancy type angle cock, of 15 mm bore complete all as specified and directed.

M&L in repairs brass chromium plated shower rose 125 mm size with or without swivel joints with shower arm 15 mm size, 195 mm long with bend of 45 degree with flange, including fixing to steel pipe or union

Dismantling water tanks capacity exc. 500 Liter but n. exc. 1000 Liters complete all as specified and directed.

S&F triple layer rotational moulded polyethylene water storage tanks white colour triple layers with thread type locking cover arrangement, 500 liters (cylindrical vertical with closed top ) hoisted and fixed in position complete.

S&F Ball valves high pressure, with polythene float and fly nut complete, screwed for CPVC pipe 25 mm bore or brass ferrule and fixed complete.

S&F in repair 25 mm size Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc. 250 liters & n.exc. 500 liters capacity of tanks with bleaching powder @ 0.25 Kg per tank complete all as specified and directed.

S&F in repair PVC tank cover for 500 liters water tank complete all as specified and directed.

S&F in repair plastic water closet seat cover white, closed pattern with flat bottom & cover and aluminium anodized hinging device complete all as specified and directed.

S&F in repairs chromium plated Jet spray health faucet with 1 Meter PVC Tube and hook complete all as specified and directed.

S&F in repairs chromium plated health faucet 15mm dia screw down high pressure with 1.8 Meter Tube and hook complete all as specified and directed. Make-Jaquar, code ALD CHR 583.

M&L for spot welding in repairs not exc. 2.5cm in length exc. 6mm but n.exc 9mm thick completes all as specified and as directed.

S&F in repair rubber door brush strip of not less than 35mm wide and fixed with screw of best quality complete all as specified and as directed.

Demolition of brick work built in cement or lime mortar etc complete all as specified and directed

M & L Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

Brickwork with except bricks for security wall / perimeter wall with subclass `B' bricks straight or curved on plan exc. 6 meter mean radius built in CM 1:6 but except bricks ( using only serviceable Brick obtained from dismantling)

M & L Brick work for drain with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed

Brick work except bricks for with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete but except brick (only serviceable Brick obtained from dismantling ) all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided etc complete all as specified and directed.

M&L plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and directed at site.

M&L plain cement concrete (1:2:4) type B-2 using40mm graded stone aggregate in surface channels and drains complete all as specified and directed at site.

M&L for rendering 15mm thick on brick wall in CM 1:4 finished even and smooth w/o using extra cement complete all as specified and directed at site.

Dismantling brick or brick tiles laid bedded and pointed in any type of mortar etc complete all as specified and directed.

M&L bricks, sub class B, laid flat, bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete all as specified

M&L for brick work , sub class B, bricks but except bricks and laid flat, bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete but except bricks ( only serviceable Brick obtained from dismantling) complete all as specified and directed at site.

M&L bricks, sub class B, laid on edge, bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete all as specified and directed at site.

M&L for brick work , sub class B, bricks but except bricks and laid on edge, bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete but except bricks ( only serviceable Brick obtained from dismantling) complete all as specified and directed at site.

Raking out joints/ pointing to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc built in cement mortar complete all as directed

M&L for Keyed pointing to brick walls in cement sand mortar in 1:4 complete all as specified and directed at site.

Removal of down filled earth from drain and cleaning the bottom and side drain from mud vegetation and prepared the surface for smooth flow of water etc and removing the roots ,vegetation and mud up to 50 meter from the periphery of the area. Complete all as directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided etc complete all as specified and directed.

M&L Providing cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in coping, fixing MS post at top of wall, roof Krebs or mud stops, rounded or chamfered on edge including necessary form work complete all as specified and directed.

Demolition of cement concrete (reinforced) Concrete of any description and in any position not otherwise specifically provided for including reinforcement to cut as required to facilitate demolition complete all as specified and directed at site.

M&L mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L mild steel TMT bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L providing pre-cast reinforced cement concrete with RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slab of drains, manhole covers set in cement mortar 1:4 etc with necessary use and waste of form work complete all as specified and directed.

M&L for providing reinforced cement concrete type B1 1:1½:3 (20mm graded aggregate) in precast posts fencing posts, straining or terminal posts, struts etc, for fencing average sectional area exc. 100Sqm and n.exc 250 Sq cm Complete all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in cement concrete complete all as specified and directed at site.

Taking down chain link fencing fixed to any type of standard rails, straining bolts etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S & F mild steel work as in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets including all necessary drilling, bolting or riveting etc and similar work confirming to Fe 290 Grade E-165. Complete all as specified and as directed.

Excavating in trenches in soft/loose soil, n. exc. 1.5 m wide and n exc. 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc. 10 Sqm on plan and n exc. 1.5 m in depth and getting out in soft/loose soil.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc.

Supply only chain link MS galvanized fencing, any size or type of minimum dia 3.15 mm or above as directed ( Weight shall be decided through a BOOO)

M&L for mild steel round bar 10 to 12mm dia confirming Fe-410-W (Gde.E-250) Fe 290 (Gde - E-165) as in stiffeners to chain link fencing etc all as specified and directed.

M&L for two coat synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10cm width or girth including preparation complete all as specified

Preparing new or previously untreated steel or iron surfaces not exceeding 10cm width or girth and two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed at site.

Taking down cement or cement lime plaster brick or stone walls of any description including racking out joints hacking for key scrubbing down with water etc complete all as per specified and directed.

M&L Rendering 15 mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall, pilasters, cornices etc and applying two coat of cement base paint over one coat of white cement primer complete all as specified and as directed..

Excavating in trenches, n exc. 1.5 m wide and n exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sq m on plan and n exc1.5 m in depth and getting out in soft /loose soil complete all as specified and directed at site.

M&L PCC 1:2:4 type B2 40mm graded stone aggregate as in fixing of fencing post and mass concrete all as specified.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed at site.

S&F rolled mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed at site.

Cutting holes in brick walls built in cement mortar for inserting hold fasts exc. one brick but not exc. two brick complete all as specified and directed at site.

M&L PCC 1:3:6 type C-1 as in filling in holes of hold fasts complete all as specified and directed at site.

M&L preparing old decorated surfaces of wall by washing, rubbing down and stopping of painted surfaces and applying one coat of exterior emulsion paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repair chequered cement concrete tiles 30cmx30cmx25mm thick with gray cement and pigment, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified.

M&L sand filling under floors or in foundation including watering and well ramming with consolidation of thickness as specified and directed.

S&F in repair machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed at site.

M & L Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) 100 mm thick as in hard standing /pavement including finishing the surface fair and even without using extra cement

M/S ARORA CONSTRUCTION

DEEP ENTERPRISES

GANGA TRADERS

M/s Pandey Trading Company

M/s Comfort Air Conditioning and Refrigeration Engineers

JYOT BUILDERS

Shiva Builders

M/S EASTERN TECHNOCRAFTS

M/S B.P. CONSTRUCTION