SPECIAL REPAIRS TO ROADS BEHIND 1200 AUDITORIUM AND POCKETS OF FOACCN AT AWC UNDER GE AWC MHOW

Amount

Scarifying or picking up gravelled,macadam or bituminous macadam surface in area not exceeding 400 Sqm and depth not exceeding 100mm deep and removing to a distance not exc 50m and all removed from site etc complete all as specified and directed.

M&L for preparation of surfaces of existing black top surface with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clean the surfaces with gunny bags to remove all loose dirt etc and M&L for applying evenly a tack coat with bitumenous primer using paving bitumen at the rate of 5 kg / 10 sqm and providing premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed.

Note1 : Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus side adopted. (b)SDAC shall be as per MORTH specification Note2: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only) (iii) The mix shall be designed by job mix formula and approved by GE. (iv) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account.

M&L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

Material and labour for applying prime coat with bituminous primer @ 10 Kg/10 Sqm over old scarified surface,complete all as specified and directed.

M&L for making lines, dashes,arrows,letters etc not exceeding 15 cm wide on bituminous/concrete surface with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area confirming to MOST & BIS specification, not less than 2.50 mm to 3.0MM thick of white/golden/yellow as approved colour/shade and applied with machine, as per manufacturer's instruction including preparation of surfaces i.e cleaning of surface by removing all dust,dirt,oil grease etc complete all as specified and directed. (Make:- Shalimark of STP Ltd or M/S Kataline Infra Product Pvt Ltd or equivalent as approved by GE) (Note :- The rate included for provision of red signals to keep off traffic from wet paint cleaning road surfaces and working during odd hours when traffic is light.

Bharadwaj Builders

Narayandas Phoolchand Mishra Infrastructures Pvt. Ltd.