Repairing And Replacement of Flow meter with pipe at inlet of STP with allied works in Main Hospital SKIMS,Soura Srinagar

Amount

SITC of Electromagnetic flow meter 250mm dia at Sewage Treatment plant. Specifications: Flow range: 63 m3/h Liner: Hard Rubber / PTFE Type: integral LCD display, Fully Programmable Flow direction: forward Operating Pressure:0.5 to 6 Bar g Flow tube: SS304 Coil housing : Fully welded sheet steel, PU coated Electrode MOC: SS316 Connection: flange end- CS/MS Housing: Die cast Aluminium with PU Finish Temp: 450C Protection: IP67 Area Classification: Hazardous Power Supply: 85-250 VAC 48-63Hz Diagnostics: Empty pipe detection, Coil temp., Coil resistance, Conductivity etc. Accuracy: ±0.5% of measured value. Cable Length; 5 m Grounding Type; Rings. Certificates; 1. Standard Calibration Certificate 2. Standard Test and Guarantee Certificate Including all the accessories, tools/tackles required to execute the job.

Providing and fitting of 63 A Double Pole MCB of polycarbonate material and all brass components inside. Complete job. (IS 60898-1)

Providing and Fitting/ Laying of PVC insulated multi strand Two Core copper wire 4sq mm (IS694) from operators room to the flow meter with required fastening/ clamping (Complete job)

Providing and fitting of MS pipe (IS1239) 2m 250mm fitted with MS Short bend 250 mm to be fitted in upward direction includes Fitting of MS flange ( 2 sets) 250mm conferring to IS 6392 (relevant table), job includes Providing and fitting of MS pipe 100 mm 1m as air vent welded at 30 degree to the main pipe after Flow metre with all fitments/ fasteners and gaskets and alterations/ modifications, including all tools and tackles required to execute the job.

Providing/Fitting/Fabrication of Canopy/ Enclosure of MS sheet metal 2mm (IS 432), of dimensions H= 4’, B= 3’, W= 3’ reinforced/framed with MS Angle 35x35x5mm, with corrugated roof for housing flow metre display and equipment with front door hinged on one side with air went and locking system, with base of the box resting on MS angle 35x35x5mm frame of 3’ height duly fixed and grouted on the feasible spot on site under the supervision of site engineer, job includes two coats of steel primer and two coats of synthetic enamel paint to all the surfaces (interior & Exterior), all tools tackles, fasteners, and other materials required for the execution of the job. The job shall be executed as per the drawing and parameters provided by the site Engineer.

M/S KHAN ELECTRICALS and MECHANICALS WORKS (BID ID -2332345)